Re: eeepc: rfkill on 900A defunct

[Jiri Slaby]

On 02/28/2011 10:49 AM, Jiri Slaby wrote:
> On 11/24/2010 09:18 PM, Matthew Garrett wrote:
>> Hm. As a shorter term fix, can you try this (entirely untested!) 
>> approach?
> 
> What is the status of this? Was there any alternative merged?

Ping.

>> diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
>> index b2edfdc..8f817d6 100644
>> --- a/drivers/platform/x86/eeepc-laptop.c
>> +++ b/drivers/platform/x86/eeepc-laptop.c
>> @@ -574,8 +574,9 @@ static bool eeepc_wlan_rfkill_blocked(struct eeepc_laptop *eeepc)
>>  	return true;
>>  }
>>  
>> -static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
>> +static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
>>  {
>> +	struct pci_dev *port;
>>  	struct pci_dev *dev;
>>  	struct pci_bus *bus;
>>  	bool blocked = eeepc_wlan_rfkill_blocked(eeepc);
>> @@ -588,9 +589,17 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
>>  	mutex_lock(&eeepc->hotplug_lock);
>>  
>>  	if (eeepc->hotplug_slot) {
>> -		bus = pci_find_bus(0, 1);
>> +		port = acpi_get_pci_dev(handle);
>> +
>> +		if (!port) {
>> +			pr_warning("Unable to find port\n");
>> +			goto out_unlock;
>> +		}
>> +
>> +		bus = port->subordinate;
>> +
>>  		if (!bus) {
>> -			pr_warning("Unable to find PCI bus 1?\n");
>> +			pr_warning("Unable to find PCI bus?\n");
>>  			goto out_unlock;
>>  		}
>>  
>> @@ -636,6 +645,17 @@ out_unlock:
>>  	mutex_unlock(&eeepc->hotplug_lock);
>>  }
>>  
>> +static void eeepc_rfkill_hotplug_update(struct eeepc_laptop *eeepc, char *node)
>> +{
>> +	acpi_status status = AE_OK;
>> +	acpi_handle handle;
>> +
>> +	status = acpi_get_handle(NULL, node, &handle);
>> +
>> +	if (ACPI_SUCCESS(status))
>> +		eeepc_rfkill_hotplug(eeepc, handle);
>> +}
>> +
>>  static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
>>  {
>>  	struct eeepc_laptop *eeepc = data;
>> @@ -643,7 +663,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
>>  	if (event != ACPI_NOTIFY_BUS_CHECK)
>>  		return;
>>  
>> -	eeepc_rfkill_hotplug(eeepc);
>> +	eeepc_rfkill_hotplug(eeepc, handle);
>>  }
>>  
>>  static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc,
>> @@ -661,6 +681,11 @@ static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc,
>>  						     eeepc);
>>  		if (ACPI_FAILURE(status))
>>  			pr_warning("Failed to register notify on %s\n", node);
>> +		/*
>> +		 * Refresh pci hotplug in case the rfkill state was
>> +		 * changed during setup.
>> +		 */
>> +		eeepc_rfkill_hotplug(eeepc, handle);
>>  	} else
>>  		return -ENODEV;
>>  
>> @@ -682,6 +707,12 @@ static void eeepc_unregister_rfkill_notifier(struct eeepc_laptop *eeepc,
>>  		if (ACPI_FAILURE(status))
>>  			pr_err("Error removing rfkill notify handler %s\n",
>>  				node);
>> +			/*
>> +			 * Refresh pci hotplug in case the rfkill
>> +			 * state was changed after
>> +			 * eeepc_unregister_rfkill_notifier()
>> +			 */
>> +		eeepc_rfkill_hotplug(eeepc, handle);
>>  	}
>>  }
>>  
>> @@ -805,11 +836,7 @@ static void eeepc_rfkill_exit(struct eeepc_laptop *eeepc)
>>  		rfkill_destroy(eeepc->wlan_rfkill);
>>  		eeepc->wlan_rfkill = NULL;
>>  	}
>> -	/*
>> -	 * Refresh pci hotplug in case the rfkill state was changed after
>> -	 * eeepc_unregister_rfkill_notifier()
>> -	 */
>> -	eeepc_rfkill_hotplug(eeepc);
>> +
>>  	if (eeepc->hotplug_slot)
>>  		pci_hp_deregister(eeepc->hotplug_slot);
>>  
>> @@ -878,11 +905,6 @@ static int eeepc_rfkill_init(struct eeepc_laptop *eeepc)
>>  	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P5");
>>  	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P6");
>>  	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P7");
>> -	/*
>> -	 * Refresh pci hotplug in case the rfkill state was changed during
>> -	 * setup.
>> -	 */
>> -	eeepc_rfkill_hotplug(eeepc);
>>  
>>  exit:
>>  	if (result && result != -ENODEV)
>> @@ -917,8 +939,11 @@ static int eeepc_hotk_restore(struct device *device)
>>  	struct eeepc_laptop *eeepc = dev_get_drvdata(device);
>>  
>>  	/* Refresh both wlan rfkill state and pci hotplug */
>> -	if (eeepc->wlan_rfkill)
>> -		eeepc_rfkill_hotplug(eeepc);
>> +	if (eeepc->wlan_rfkill) {
>> +		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P5");
>> +		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P6");
>> +		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P7");
>> +	}
>>  
>>  	if (eeepc->bluetooth_rfkill)
>>  		rfkill_set_sw_state(eeepc->bluetooth_rfkill,
> 
> thanks,


-- 
js
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/