Re: Mass udp flow reboot linux with RealTek RTL-8169 Gigabit

[Francois Romieu]

Seblu <seblu@xxxxxxxxx> :
[...]
> I catched the following trace during my previous torture session.
> Maybe it can help.

It's the usual r8169 TX timeout watchdog.

[...]
> > Can you apply the two attached patches on top of the previous ones and
> > give it a try ? The debug should not be too verbose if things are stationary
> > enough.
> 2.6.38-rc7 with your 2 previous patch change the game. No reboot. No
> strange message in dmesg.

?

"strange message" as :
[ ] netdev watchdog messages
[ ] 0001 0001 0001 0001 (or similar) message
[ ] net_ratelimit message

> But some sent packets are lost from some host. Example:
[...]
> This is maybe normal under stress, card discard packet after all.

It seems so. 0.08% packet loss. 10 ~ 20kpps (right ?). Sample at 0.1 Hz (ping).

[...]
> I've a serial cable and a second computer, but my first computer
> doesn't have a com port. Is it then possible?

Hardly. Forget it for now.

> Do you need more test?

1. 2.6.38-rc7 without the patches
2. 2.6.38-rc7 with the r8169.c driver of 2.6.38-rc5, without the patches
3. current setup + pktgen. Lower the packet size as long as it increases
   the sender's pps.

I do not understand why the bug would be gone if it was in the r8169
proper.

-- 
Ueimor
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/