[PATCH v2 2.6.38-rc8-tip 13/20] 13: x86: x86 specific probe handling

[Srikar Dronamraju]

Provides x86 specific implementations for setting the current
instruction pointer, pre single-step and post-singlestep handling,
enabling and disabling singlestep.

This patch also introduces TIF_UPROBE which is set by uprobes notifier
code. TIF_UPROBE indicates that there is pending work that needs to be
done at do_notify_resume time.

Signed-off-by: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
---
 arch/x86/include/asm/thread_info.h |    2 
 arch/x86/include/asm/uprobes.h     |   10 ++
 arch/x86/kernel/uprobes.c          |  157 ++++++++++++++++++++++++++++++++++++
 3 files changed, 168 insertions(+), 1 deletions(-)

diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index f0b6e5d..5b9c9f0 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -84,6 +84,7 @@ struct thread_info {
 #define TIF_SECCOMP		8	/* secure computing */
 #define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
 #define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
+#define TIF_UPROBE		12	/* breakpointed or singlestepping */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* 32bit process */
 #define TIF_FORK		18	/* ret_from_fork */
@@ -107,6 +108,7 @@ struct thread_info {
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
 #define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
+#define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h
index e38950f..0e1b23f 100644
--- a/arch/x86/include/asm/uprobes.h
+++ b/arch/x86/include/asm/uprobes.h
@@ -37,11 +37,19 @@ struct uprobe_arch_info {
 
 struct uprobe_task_arch_info {
 	unsigned long saved_scratch_register;
+	int oflags;
 };
 #else
 struct uprobe_arch_info {};
-struct uprobe_task_arch_info {};
+struct uprobe_task_arch_info {
+	int oflags;
+};
 #endif
 struct uprobe;
 extern int analyze_insn(struct task_struct *tsk, struct uprobe *uprobe);
+extern void set_ip(struct pt_regs *regs, unsigned long vaddr);
+extern int pre_xol(struct uprobe *uprobe, struct pt_regs *regs);
+extern int post_xol(struct uprobe *uprobe, struct pt_regs *regs);
+extern void arch_uprobe_enable_sstep(struct pt_regs *regs);
+extern void arch_uprobe_disable_sstep(struct pt_regs *regs);
 #endif	/* _ASM_UPROBES_H */
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index cf223a4..5667e90 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -25,6 +25,7 @@
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/uprobes.h>
+#include <linux/uaccess.h>
 
 #include <linux/kdebug.h>
 #include <asm/insn.h>
@@ -412,3 +413,159 @@ int analyze_insn(struct task_struct *tsk, struct uprobe *uprobe)
 	prepare_fixups(uprobe, &insn);
 	return 0;
 }
+
+/*
+ * @reg: reflects the saved state of the task
+ * @vaddr: the virtual address to jump to.
+ * Return 0 on success or a -ve number on error.
+ */
+void set_ip(struct pt_regs *regs, unsigned long vaddr)
+{
+	regs->ip = vaddr;
+}
+
+/*
+ * pre_xol - prepare to execute out of line.
+ * @uprobe: the probepoint information.
+ * @regs: reflects the saved user state of @tsk.
+ *
+ * If we're emulating a rip-relative instruction, save the contents
+ * of the scratch register and store the target address in that register.
+ *
+ * Returns true if @uprobe->opcode is @bkpt_insn.
+ */
+int pre_xol(struct uprobe *uprobe, struct pt_regs *regs)
+{
+	struct uprobe_task_arch_info *tskinfo = &current->utask->tskinfo;
+
+	regs->ip = current->utask->xol_vaddr;
+#ifdef CONFIG_X86_64
+	if (uprobe->fixups & UPROBES_FIX_RIP_AX) {
+		tskinfo->saved_scratch_register = regs->ax;
+		regs->ax = current->utask->vaddr;
+		regs->ax += uprobe->arch_info.rip_rela_target_address;
+	} else if (uprobe->fixups & UPROBES_FIX_RIP_CX) {
+		tskinfo->saved_scratch_register = regs->cx;
+		regs->cx = current->utask->vaddr;
+		regs->cx += uprobe->arch_info.rip_rela_target_address;
+	}
+#endif
+	return 0;
+}
+
+/*
+ * Called by post_xol() to adjust the return address pushed by a call
+ * instruction executed out of line.
+ */
+static int adjust_ret_addr(unsigned long sp, long correction)
+{
+	int rasize, ncopied;
+	long ra = 0;
+
+	if (is_32bit_app(current))
+		rasize = 4;
+	else
+		rasize = 8;
+	ncopied = copy_from_user(&ra, (void __user *) sp, rasize);
+	if (unlikely(ncopied))
+		goto fail;
+	ra += correction;
+	ncopied = copy_to_user((void __user *) sp, &ra, rasize);
+	if (unlikely(ncopied))
+		goto fail;
+	return 0;
+
+fail:
+	printk(KERN_ERR
+		"uprobes: Failed to adjust return address after"
+		" single-stepping call instruction;"
+		" pid=%d, sp=%#lx\n", current->pid, sp);
+	return -EFAULT;
+}
+
+#ifdef CONFIG_X86_64
+static bool is_riprel_insn(struct uprobe *uprobe)
+{
+	return ((uprobe->fixups &
+			(UPROBES_FIX_RIP_AX | UPROBES_FIX_RIP_CX)) != 0);
+}
+
+#endif	/* CONFIG_X86_64 */
+
+/*
+ * Called after single-stepping. To avoid the SMP problems that can
+ * occur when we temporarily put back the original opcode to
+ * single-step, we single-stepped a copy of the instruction.
+ *
+ * This function prepares to resume execution after the single-step.
+ * We have to fix things up as follows:
+ *
+ * Typically, the new ip is relative to the copied instruction.  We need
+ * to make it relative to the original instruction (FIX_IP).  Exceptions
+ * are return instructions and absolute or indirect jump or call instructions.
+ *
+ * If the single-stepped instruction was a call, the return address that
+ * is atop the stack is the address following the copied instruction.  We
+ * need to make it the address following the original instruction (FIX_CALL).
+ *
+ * If the original instruction was a rip-relative instruction such as
+ * "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent
+ * instruction using a scratch register -- e.g., "movl %edx,(%rax)".
+ * We need to restore the contents of the scratch register and adjust
+ * the ip, keeping in mind that the instruction we executed is 4 bytes
+ * shorter than the original instruction (since we squeezed out the offset
+ * field).  (FIX_RIP_AX or FIX_RIP_CX)
+ */
+int post_xol(struct uprobe *uprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+	int result = 0;
+	long correction;
+
+	correction = (long)(utask->vaddr - utask->xol_vaddr);
+#ifdef CONFIG_X86_64
+	if (is_riprel_insn(uprobe)) {
+		struct uprobe_task_arch_info *tskinfo;
+		tskinfo = &current->utask->tskinfo;
+
+		if (uprobe->fixups & UPROBES_FIX_RIP_AX)
+			regs->ax = tskinfo->saved_scratch_register;
+		else
+			regs->cx = tskinfo->saved_scratch_register;
+		/*
+		 * The original instruction includes a displacement, and so
+		 * is 4 bytes longer than what we've just single-stepped.
+		 * Fall through to handle stuff like "jmpq *...(%rip)" and
+		 * "callq *...(%rip)".
+		 */
+		correction += 4;
+	}
+#endif
+	if (uprobe->fixups & UPROBES_FIX_IP)
+		regs->ip += correction;
+	if (uprobe->fixups & UPROBES_FIX_CALL)
+		result = adjust_ret_addr(regs->sp, correction);
+	return result;
+}
+
+void arch_uprobe_enable_sstep(struct pt_regs *regs)
+{
+	/*
+	 * Enable single-stepping by
+	 * - Set TF on stack
+	 * - Set TIF_SINGLESTEP: Guarantees that TF is set when
+	 *	returning to user mode.
+	 *  - Indicate that TF is set by us.
+	 */
+	regs->flags |= X86_EFLAGS_TF;
+	set_thread_flag(TIF_SINGLESTEP);
+	set_thread_flag(TIF_FORCED_TF);
+}
+
+void arch_uprobe_disable_sstep(struct pt_regs *regs)
+{
+	/* Disable single-stepping by clearing what we set */
+	clear_thread_flag(TIF_SINGLESTEP);
+	clear_thread_flag(TIF_FORCED_TF);
+	regs->flags &= ~X86_EFLAGS_TF;
+}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/