[PATCH v3] trivial: fix common spelling mistakes

From: Peter Huewe
Date: Mon Mar 14 2011 - 16:35:52 EST

Next message: Rob Clark: "Re: [PATCH 09/10] MCDE: Add build files and bus"
Previous message: David Rientjes: "Re: [PATCH 1/3 for 2.6.38] oom: oom_kill_process: don't set TIF_MEMDIEif !p->mm"
In reply to: Jiri Kosina: "Re: [PATCH v2/resend] trivial: fix common spelling mistakes"
Next in thread: Peter Huewe: "[PATCH] staging/trivial: Fix common spelling mistakes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This patch fixes some very common spelling mistakes.
The changes were carried out by hand and are made in
documentation/comments only - no functional change.
Variables were left untouched on purpose.
Linebreaks were also left untouched on purpose.

v2: Added some more spellchecks
v3: splitted up drivers/staging/

The fixed spelling mistakes are:
WRONG -> RIGHT

accomodate -> accommodate
acommodate -> accommodate

adress -> address
addres -> address

hightest -> highest
hight -> height
hight -> high (when mentioned in contrast to low)
hightlight -> highlight

libary -> library
libaray -> library

occured -> occurred

reqest -> request
reguest -> request
requst -> request
reqeust -> request

acheive -> achieve
beggining -> beginning
embarass -> embarrass
enviroment -> environment
fagment -> fragment
indefinately-> indefinitely
knowlege -> knowledge
regester -> register
unferflow -> underflow

recieve -> receive
interupt -> interrupt
interrrupt -> interrupt

paralell -> parallel
paralel -> parallel
preceeding -> preceding
publically -> publicly
shedule -> shedule
supercede -> supersede
wierd -> weird
writen -> written
writting -> writing

And some other minor changes that caught my eye doing the changes

KernelVersion: Trivial Git (795abaf1e) 20110308

Signed-off-by: Peter Huewe <peterhuewe@xxxxxx>
---
arch/x86/crypto/aesni-intel_asm.S | 2 +-
arch/x86/kernel/i387.c | 2 +-
arch/x86/kernel/kvmclock.c | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/pci/i386.c | 2 +-
crypto/async_tx/async_xor.c | 2 +-
drivers/ata/ahci.h | 2 +-
drivers/ata/ata_piix.c | 4 ++--
drivers/ata/libata-scsi.c | 2 +-
drivers/ata/pata_amd.c | 2 +-
drivers/ata/pata_cs5520.c | 2 +-
drivers/ata/pata_sil680.c | 2 +-
drivers/ata/pata_triflex.c | 2 +-
drivers/ata/sata_mv.c | 2 +-
drivers/atm/idt77252.h | 2 +-
drivers/block/cciss.c | 2 +-
drivers/block/drbd/drbd_int.h | 2 +-
drivers/block/ps3vram.c | 2 +-
drivers/block/xsysace.c | 2 +-
drivers/bluetooth/btmrvl_sdio.c | 2 +-
drivers/char/mxser.h | 2 +-
drivers/dma/intel_mid_dma.c | 4 ++--
drivers/dma/intel_mid_dma_regs.h | 4 ++--
drivers/edac/edac_core.h | 2 +-
drivers/gpu/drm/i915/intel_dp.c | 2 +-
drivers/gpu/drm/nouveau/nv40_graph.c | 2 +-
drivers/gpu/drm/radeon/atombios.h | 6 +++---
drivers/gpu/drm/radeon/radeon.h | 2 +-
drivers/gpu/drm/vmwgfx/vmwgfx_fb.c | 4 ++--
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 2 +-
drivers/gpu/vga/vgaarb.c | 2 +-
drivers/hid/hid-core.c | 4 ++--
drivers/hid/hid-roccat-kone.h | 2 +-
drivers/hwmon/hp_accel.c | 2 +-
drivers/hwmon/sht15.c | 4 ++--
drivers/hwmon/w83791d.c | 2 +-
drivers/i2c/algos/i2c-algo-pcf.c | 2 +-
drivers/i2c/busses/i2c-cpm.c | 2 +-
drivers/i2c/busses/i2c-elektor.c | 4 ++--
drivers/i2c/busses/i2c-intel-mid.c | 12 ++++++------
drivers/ide/piix.c | 4 ++--
drivers/ide/triflex.c | 2 +-
drivers/ide/via82cxxx.c | 2 +-
drivers/infiniband/hw/ipath/ipath_intr.c | 2 +-
drivers/infiniband/hw/ipath/ipath_ruc.c | 2 +-
drivers/infiniband/hw/qib/qib_iba6120.c | 2 +-
drivers/infiniband/hw/qib/qib_iba7220.c | 2 +-
drivers/infiniband/hw/qib/qib_iba7322.c | 2 +-
drivers/infiniband/hw/qib/qib_keys.c | 2 +-
drivers/infiniband/hw/qib/qib_mad.h | 2 +-
drivers/infiniband/hw/qib/qib_ruc.c | 2 +-
drivers/input/misc/keyspan_remote.c | 2 +-
drivers/input/mouse/bcm5974.c | 2 +-
drivers/input/mouse/logips2pp.c | 2 +-
drivers/input/mouse/vsxxxaa.c | 2 +-
drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +-
drivers/isdn/hardware/mISDN/w6692.c | 2 +-
drivers/isdn/hisax/amd7930_fn.c | 2 +-
drivers/isdn/hisax/avm_pci.c | 2 +-
drivers/isdn/hisax/elsa.c | 2 +-
drivers/isdn/hisax/hisax_fcpcipnp.c | 4 ++--
drivers/isdn/hisax/l3dss1.c | 2 +-
drivers/isdn/isdnloop/isdnloop.c | 2 +-
drivers/isdn/mISDN/dsp_dtmf.c | 2 +-
drivers/md/dm-region-hash.c | 2 +-
drivers/md/md.h | 2 +-
drivers/media/common/saa7146_i2c.c | 6 +++---
drivers/media/common/tuners/mxl5005s.c | 2 +-
drivers/media/dvb/b2c2/flexcop-pci.c | 2 +-
drivers/media/dvb/dvb-core/dvb_frontend.c | 2 +-
drivers/media/dvb/dvb-usb/dvb-usb.h | 2 +-
drivers/media/dvb/dvb-usb/lmedm04.c | 12 ++++++------
drivers/media/dvb/frontends/dib7000m.c | 2 +-
drivers/media/dvb/frontends/dib7000p.c | 2 +-
drivers/media/dvb/frontends/s5h1420.c | 2 +-
drivers/media/dvb/pluto2/pluto2.c | 4 ++--
drivers/media/dvb/ttusb-dec/ttusb_dec.c | 2 +-
drivers/media/rc/nuvoton-cir.c | 2 +-
drivers/media/rc/rc-main.c | 2 +-
drivers/media/video/cafe_ccic.c | 2 +-
drivers/media/video/cx23885/cx23885.h | 4 ++--
drivers/media/video/davinci/dm644x_ccdc.c | 2 +-
drivers/media/video/gspca/sonixj.c | 2 +-
drivers/media/video/gspca/spca501.c | 2 +-
drivers/media/video/gspca/zc3xx.c | 2 +-
drivers/media/video/ivtv/ivtv-firmware.c | 2 +-
drivers/media/video/ov6650.c | 2 +-
drivers/media/video/ov9640.c | 2 +-
drivers/media/video/saa7164/saa7164-cmd.c | 2 +-
drivers/media/video/stk-sensor.c | 2 +-
drivers/media/video/uvc/uvc_video.c | 4 ++--
drivers/message/fusion/lsi/mpi_log_sas.h | 10 +++++-----
drivers/message/fusion/lsi/mpi_raid.h | 2 +-
drivers/message/fusion/mptbase.c | 2 +-
drivers/message/fusion/mptctl.c | 2 +-
drivers/misc/iwmc3200top/main.c | 2 +-
drivers/misc/kgdbts.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/mmc/core/mmc_ops.c | 2 +-
drivers/mmc/host/atmel-mci.c | 2 +-
drivers/mtd/chips/cfi_cmdset_0001.c | 4 ++--
drivers/mtd/lpddr/lpddr_cmds.c | 2 +-
drivers/mtd/maps/ceiva.c | 2 +-
drivers/mtd/maps/pmcmsp-flash.c | 2 +-
drivers/mtd/mtdchar.c | 2 +-
drivers/mtd/nand/diskonchip.c | 4 ++--
drivers/mtd/nand/r852.c | 6 +++---
drivers/mtd/nand/sh_flctl.c | 2 +-
drivers/net/amd8111e.c | 2 +-
drivers/net/amd8111e.h | 2 +-
drivers/net/arm/ks8695net.c | 2 +-
drivers/net/atl1c/atl1c_hw.c | 2 +-
drivers/net/atl1e/atl1e_hw.c | 2 +-
drivers/net/atlx/atl2.c | 2 +-
drivers/net/bfin_mac.c | 4 ++--
drivers/net/bnx2x/bnx2x_main.c | 2 +-
drivers/net/bonding/bond_alb.c | 2 +-
drivers/net/caif/caif_shmcore.c | 2 +-
drivers/net/caif/caif_spi_slave.c | 2 +-
drivers/net/can/janz-ican3.c | 8 ++++----
drivers/net/can/sja1000/sja1000.c | 2 +-
drivers/net/can/usb/ems_usb.c | 2 +-
drivers/net/can/usb/esd_usb2.c | 2 +-
drivers/net/cassini.c | 2 +-
drivers/net/cxgb3/t3_hw.c | 6 +++---
drivers/net/cxgb4/t4_hw.c | 2 +-
drivers/net/davinci_emac.c | 2 +-
drivers/net/e1000e/netdev.c | 2 +-
drivers/net/fec.h | 2 +-
drivers/net/ibm_newemac/tah.c | 2 +-
drivers/net/igb/e1000_phy.c | 2 +-
drivers/net/igb/igb_main.c | 2 +-
drivers/net/igbvf/netdev.c | 2 +-
drivers/net/ipg.c | 20 ++++++++++----------
drivers/net/irda/donauboe.c | 2 +-
drivers/net/irda/mcs7780.c | 2 +-
drivers/net/irda/pxaficp_ir.c | 4 ++--
drivers/net/irda/via-ircc.c | 2 +-
drivers/net/ixgbe/ixgbe_phy.c | 2 +-
drivers/net/mlx4/en_ethtool.c | 2 +-
drivers/net/mlx4/en_rx.c | 4 ++--
drivers/net/natsemi.c | 2 +-
drivers/net/ppp_async.c | 2 +-
drivers/net/pxa168_eth.c | 2 +-
drivers/net/s2io.c | 2 +-
drivers/net/sfc/mcdi_pcol.h | 4 ++--
drivers/net/sis190.c | 4 ++--
drivers/net/sis900.c | 4 ++--
drivers/net/skge.h | 8 ++++----
drivers/net/sky2.c | 2 +-
drivers/net/sky2.h | 6 +++---
drivers/net/smc91x.h | 2 +-
drivers/net/smsc911x.c | 2 +-
drivers/net/smsc9420.c | 2 +-
drivers/net/tc35815.c | 8 ++++----
drivers/net/tehuti.c | 4 ++--
drivers/net/tokenring/olympic.c | 2 +-
drivers/net/tsi108_eth.h | 8 ++++----
drivers/net/usb/rndis_host.c | 2 +-
drivers/net/via-rhine.c | 4 ++--
drivers/net/via-velocity.c | 2 +-
drivers/net/vmxnet3/vmxnet3_drv.c | 2 +-
drivers/net/vxge/vxge-config.h | 2 +-
drivers/net/wan/lmc/lmc_var.h | 2 +-
drivers/net/wimax/i2400m/driver.c | 2 +-
drivers/net/wimax/i2400m/i2400m-usb.h | 2 +-
drivers/net/wimax/i2400m/rx.c | 4 ++--
drivers/net/wireless/ath/ath5k/reg.h | 4 ++--
drivers/net/wireless/ath/regd.c | 2 +-
drivers/net/wireless/b43/b43.h | 4 ++--
drivers/net/wireless/ipw2x00/ipw2200.c | 2 +-
drivers/net/wireless/libertas/cfg.c | 2 +-
drivers/net/wireless/libertas/if_spi.h | 2 +-
drivers/net/wireless/rt2x00/rt2800.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00link.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00queue.h | 8 ++++----
drivers/net/wireless/rt2x00/rt2x00usb.c | 4 ++--
drivers/net/wireless/rt2x00/rt2x00usb.h | 2 +-
drivers/net/wireless/rtlwifi/debug.h | 2 +-
drivers/net/wireless/rtlwifi/pci.c | 2 +-
drivers/net/wireless/rtlwifi/regd.c | 2 +-
drivers/net/wireless/wl12xx/io.h | 2 +-
drivers/net/wireless/zd1211rw/zd_rf_uw2453.c | 2 +-
drivers/parisc/pdc_stable.c | 2 +-
drivers/parport/parport_pc.c | 2 +-
drivers/pnp/pnpbios/bioscalls.c | 2 +-
drivers/ps3/ps3-lpm.c | 4 ++--
drivers/ps3/ps3-sys-manager.c | 2 +-
drivers/rapidio/rio-scan.c | 2 +-
drivers/rtc/interface.c | 2 +-
drivers/rtc/rtc-sa1100.c | 2 +-
drivers/s390/block/dasd_3990_erp.c | 4 ++--
drivers/s390/char/tty3270.c | 2 +-
drivers/s390/cio/device_fsm.c | 2 +-
drivers/s390/net/claw.c | 2 +-
drivers/s390/net/ctcm_fsms.c | 2 +-
drivers/scsi/3w-9xxx.h | 2 +-
drivers/scsi/advansys.c | 2 +-
drivers/scsi/aic7xxx/aic79xx_core.c | 6 +++---
drivers/scsi/aic7xxx/aic7xxx_core.c | 4 ++--
drivers/scsi/be2iscsi/be_cmds.h | 18 +++++++++---------
drivers/scsi/bfa/bfa_defs_svc.h | 2 +-
drivers/scsi/bfa/bfa_fc.h | 2 +-
drivers/scsi/bfa/bfa_svc.c | 2 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +-
drivers/scsi/cxgbi/libcxgbi.h | 6 +++---
drivers/scsi/dc395x.c | 2 +-
drivers/scsi/fcoe/libfcoe.c | 2 +-
drivers/scsi/fdomain.c | 2 +-
drivers/scsi/gdth.h | 2 +-
drivers/scsi/initio.c | 2 +-
drivers/scsi/libfc/fc_lport.c | 4 ++--
drivers/scsi/lpfc/lpfc_bsg.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_sli.c | 4 ++--
drivers/scsi/megaraid/mega_common.h | 2 +-
drivers/scsi/megaraid/megaraid_mbox.c | 2 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 2 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 2 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 6 +++---
drivers/scsi/pmcraid.c | 4 ++--
drivers/scsi/qla2xxx/qla_fw.h | 2 +-
drivers/scsi/qla2xxx/qla_isr.c | 2 +-
drivers/scsi/qla2xxx/qla_mbx.c | 6 +++---
drivers/scsi/qla2xxx/qla_nx.c | 2 +-
drivers/scsi/qla4xxx/ql4_def.h | 2 +-
drivers/scsi/scsi_netlink.c | 2 +-
drivers/scsi/scsi_transport_fc.c | 4 ++--
drivers/spi/amba-pl022.c | 2 +-
drivers/target/target_core_pr.c | 4 ++--
drivers/target/target_core_transport.c | 2 +-
drivers/telephony/ixj.c | 2 +-
drivers/tty/hvc/hvc_iucv.c | 4 ++--
drivers/tty/serial/8250.c | 2 +-
drivers/tty/serial/bfin_sport_uart.c | 2 +-
drivers/tty/serial/icom.c | 2 +-
drivers/tty/serial/jsm/jsm.h | 2 +-
drivers/tty/serial/max3107.c | 2 +-
drivers/tty/serial/mrst_max3110.c | 2 +-
drivers/tty/serial/sn_console.c | 2 +-
drivers/tty/serial/ucc_uart.c | 2 +-
drivers/usb/atm/ueagle-atm.c | 2 +-
drivers/usb/c67x00/c67x00-sched.c | 2 +-
drivers/usb/class/cdc-acm.h | 2 +-
drivers/usb/class/usbtmc.c | 2 +-
drivers/usb/gadget/amd5536udc.c | 10 +++++-----
drivers/usb/gadget/fsl_qe_udc.h | 6 +++---
drivers/usb/gadget/fsl_udc_core.c | 4 ++--
drivers/usb/gadget/langwell_udc.c | 4 ++--
drivers/usb/gadget/mv_udc_core.c | 4 ++--
drivers/usb/gadget/pch_udc.c | 2 +-
drivers/usb/gadget/s3c-hsotg.c | 4 ++--
drivers/usb/host/fhci-tds.c | 6 +++---
drivers/usb/host/fhci.h | 2 +-
drivers/usb/host/oxu210hp-hcd.c | 4 ++--
drivers/usb/host/whci/whcd.h | 2 +-
drivers/usb/musb/musb_gadget.c | 2 +-
drivers/uwb/drp.c | 4 ++--
drivers/uwb/reset.c | 2 +-
drivers/video/aty/mach64_cursor.c | 2 +-
drivers/video/da8xx-fb.c | 2 +-
drivers/video/fbsysfs.c | 2 +-
drivers/watchdog/acquirewdt.c | 2 +-
drivers/watchdog/sch311x_wdt.c | 2 +-
drivers/watchdog/smsc37b787_wdt.c | 2 +-
drivers/watchdog/sp805_wdt.c | 2 +-
drivers/xen/events.c | 2 +-
fs/btrfs/super.c | 2 +-
fs/ceph/caps.c | 2 +-
fs/ecryptfs/inode.c | 2 +-
fs/ecryptfs/main.c | 2 +-
fs/ext4/extents.c | 2 +-
fs/ext4/inode.c | 2 +-
fs/jffs2/readinode.c | 2 +-
fs/jfs/jfs_imap.c | 8 ++++----
fs/nfs/file.c | 2 +-
fs/nfsd/nfs4state.c | 2 +-
fs/notify/inotify/inotify_fsnotify.c | 2 +-
fs/notify/inotify/inotify_user.c | 2 +-
fs/ntfs/attrib.c | 2 +-
fs/ntfs/inode.c | 2 +-
fs/ntfs/logfile.c | 2 +-
fs/ntfs/logfile.h | 2 +-
fs/ntfs/mft.c | 4 ++--
fs/ntfs/super.c | 14 +++++++-------
fs/ocfs2/cluster/quorum.c | 2 +-
fs/ocfs2/namei.c | 2 +-
fs/ocfs2/stackglue.h | 2 +-
fs/reiserfs/xattr.c | 2 +-
fs/udf/inode.c | 2 +-
fs/xfs/linux-2.6/xfs_file.c | 2 +-
fs/xfs/quota/xfs_qm_bhv.c | 2 +-
fs/xfs/xfs_log_recover.c | 4 ++--
fs/xfs/xfs_vnodeops.c | 2 +-
include/drm/ttm/ttm_bo_driver.h | 4 ++--
include/linux/atmlec.h | 2 +-
include/linux/can/error.h | 2 +-
include/linux/cgroup.h | 2 +-
include/linux/fb.h | 4 ++--
include/linux/interrupt.h | 2 +-
include/linux/mmc/dw_mmc.h | 2 +-
include/linux/netfilter/nf_conntrack_proto_gre.h | 2 +-
include/linux/pci_regs.h | 2 +-
include/linux/percpu.h | 2 +-
include/linux/pxa2xx_ssp.h | 2 +-
include/linux/spi/spidev.h | 2 +-
include/linux/sunrpc/svc.h | 2 +-
include/linux/tcp.h | 2 +-
include/linux/usb.h | 2 +-
include/linux/uwb.h | 4 ++--
include/net/9p/client.h | 2 +-
include/scsi/libfc.h | 2 +-
include/scsi/libiscsi_tcp.h | 2 +-
include/scsi/osd_initiator.h | 2 +-
include/sound/cs46xx_dsp_task_types.h | 2 +-
include/sound/cs8427.h | 2 +-
include/xen/interface/physdev.h | 4 ++--
kernel/cgroup.c | 2 +-
kernel/irq/chip.c | 2 +-
kernel/latencytop.c | 2 +-
kernel/module.c | 2 +-
kernel/padata.c | 2 +-
kernel/power/main.c | 2 +-
kernel/time/jiffies.c | 2 +-
kernel/trace/trace_event_perf.c | 2 +-
kernel/user-return-notifier.c | 2 +-
lib/timerqueue.c | 2 +-
mm/hugetlb.c | 6 +++---
mm/kmemleak.c | 6 +++---
mm/percpu.c | 6 +++---
mm/slub.c | 4 ++--
net/9p/client.c | 2 +-
net/ipv4/tcp.c | 2 +-
net/ipv4/tcp_output.c | 2 +-
net/ipv6/netfilter/nf_defrag_ipv6_hooks.c | 2 +-
net/irda/irlap_event.c | 2 +-
net/irda/irttp.c | 2 +-
net/irda/timer.c | 2 +-
net/mac80211/rc80211_pid.h | 2 +-
net/netfilter/ipvs/ip_vs_proto_sctp.c | 8 ++++----
net/netfilter/nf_conntrack_core.c | 2 +-
net/netfilter/nf_conntrack_sip.c | 2 +-
net/rds/ib_send.c | 2 +-
net/rds/iw_cm.c | 2 +-
net/rds/iw_send.c | 2 +-
net/sctp/output.c | 2 +-
net/sctp/sm_statefuns.c | 2 +-
net/sctp/ulpqueue.c | 2 +-
net/sunrpc/xprtsock.c | 4 ++--
net/wireless/reg.c | 2 +-
scripts/dtc/livetree.c | 2 +-
security/apparmor/procattr.c | 2 +-
security/smack/smack_lsm.c | 2 +-
sound/drivers/pcm-indirect2.c | 2 +-
sound/drivers/serial-u16550.c | 2 +-
sound/oss/swarm_cs4297a.c | 2 +-
sound/pci/asihpi/hpi.h | 2 +-
sound/pci/ctxfi/cthw20k1.c | 2 +-
sound/pci/ctxfi/cthw20k2.c | 2 +-
sound/pci/pcxhr/pcxhr_core.c | 12 ++++++------
sound/pci/sis7019.c | 2 +-
sound/ppc/snd_ps3.c | 2 +-
sound/ppc/snd_ps3_reg.h | 8 ++++----
sound/soc/atmel/atmel_ssc_dai.c | 2 +-
sound/soc/codecs/wm8962.c | 2 +-
sound/soc/omap/ams-delta.c | 2 +-
367 files changed, 515 insertions(+), 515 deletions(-)

diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 8fe2a49..ebfe065 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -1355,7 +1355,7 @@ _zero_cipher_left_decrypt:
ENCRYPT_SINGLE_BLOCK %xmm0, %xmm1 # E(K, Yn)
sub $16, %r11
add %r13, %r11
- movdqu (%arg3,%r11,1), %xmm1 # recieve the last <16 byte block
+ movdqu (%arg3,%r11,1), %xmm1 # receive the last <16 byte block
lea SHIFT_MASK+16(%rip), %r12
sub %r13, %r12
# adjust the shuffle mask pointer to be able to shift 16-%r13 bytes
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index e60c38c..5bcfdff 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -63,7 +63,7 @@ void __cpuinit mxcsr_feature_mask_init(void)
static void __cpuinit init_thread_xstate(void)
{
/*
- * Note that xstate_size might be overwriten later during
+ * Note that xstate_size might be overwritten later during
* xsave_init().
*/

diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index f98d3ea..5ceafe5 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -157,7 +157,7 @@ static void __cpuinit kvm_setup_secondary_clock(void)
* registered memory location. If the guest happens to shutdown, this memory
* won't be valid. In cases like kexec, in which you install a new kernel, this
* means a random memory location will be kept being written. So before any
- * kind of shutdown from our side, we unregister the clock by writting anything
+ * kind of shutdown from our side, we unregister the clock by writing anything
* that does not have the 'enable' bit set in the msr
*/
#ifdef CONFIG_KEXEC
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index bcc0efc..e3a9e4b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1028,7 +1028,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, u64 data)
/*
* Special case: close write to TSC within 5 seconds of
* another CPU is interpreted as an attempt to synchronize
- * The 5 seconds is to accomodate host load / swapping as
+ * The 5 seconds is to accommodate host load / swapping as
* well as any reset of TSC during the boot process.
*
* In that case, for a reliable TSC, we can match TSC offsets,
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index b1805b7..bbce412 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -241,7 +241,7 @@ void __init pcibios_resource_survey(void)
e820_reserve_resources_late();
/*
* Insert the IO APIC resources after PCI initialization has
- * occured to handle IO APICS that are mapped in on a BAR in
+ * occurred to handle IO APICS that are mapped in on a BAR in
* PCI space, but before trying to assign unassigned pci res.
*/
ioapic_insert_resources();
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 079ae8c..bc28337 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -94,7 +94,7 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
if (unlikely(!tx))
async_tx_quiesce(&submit->depend_tx);

- /* spin wait for the preceeding transactions to complete */
+ /* spin wait for the preceding transactions to complete */
while (unlikely(!tx)) {
dma_async_issue_pending(chan);
tx = dma->device_prep_dma_xor(chan, dma_dest,
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 3e606c3..31fed35 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -227,7 +227,7 @@ enum {
/* em_ctl bits */
EM_CTL_RST = (1 << 9), /* Reset */
EM_CTL_TM = (1 << 8), /* Transmit Message */
- EM_CTL_MR = (1 << 0), /* Message Recieved */
+ EM_CTL_MR = (1 << 0), /* Message Received */
EM_CTL_ALHD = (1 << 26), /* Activity LED */
EM_CTL_XMT = (1 << 25), /* Transmit Only */
EM_CTL_SMB = (1 << 24), /* Single Message Buffer */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 6cb14ca..b4f3e5c 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -38,8 +38,8 @@
* Hardware documentation available at http://developer.intel.com/
*
* Documentation
- * Publically available from Intel web site. Errata documentation
- * is also publically available. As an aide to anyone hacking on this
+ * Publicly available from Intel web site. Errata documentation
+ * is also publicly available. As an aide to anyone hacking on this
* driver the list of errata that are relevant is below, going back to
* PIIX4. Older device documentation is now a bit tricky to find.
*
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 600f635..ebe0c77 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -999,7 +999,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
* @qc: Command that we are erroring out
*
* Generate sense block for a failed ATA command @qc. Descriptor
- * format is used to accomodate LBA48 block address.
+ * format is used to accommodate LBA48 block address.
*
* LOCKING:
* None.
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 620a07c..b0975a5 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -11,7 +11,7 @@
* Power management on ports
*
*
- * Documentation publically available.
+ * Documentation publicly available.
*/

#include <linux/kernel.h>
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 030952f..e3254fc 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -29,7 +29,7 @@
* General Public License for more details.
*
* Documentation:
- * Not publically available.
+ * Not publicly available.
*/
#include <linux/kernel.h>
#include <linux/module.h>
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 00eefbd..1f4e9af 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -11,7 +11,7 @@
*
* May be copied or modified under the terms of the GNU General Public License
*
- * Documentation publically available.
+ * Documentation publicly available.
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 0d1f89e..03b6d69 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -30,7 +30,7 @@
* Loosely based on the piix & svwks drivers.
*
* Documentation:
- * Not publically available.
+ * Not publicly available.
*/

#include <linux/kernel.h>
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index bf74a36..82693fa 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2045,7 +2045,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)

cw = &pp->crqb[in_index].ata_cmd[0];

- /* Sadly, the CRQB cannot accomodate all registers--there are
+ /* Sadly, the CRQB cannot accommodate all registers--there are
* only 11 bytes...so we must pick and choose required
* registers based on the command. So, we drop feature and
* hob_feature for [RW] DMA commands, but they are needed for
diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h
index f53a43a..3a82cc2 100644
--- a/drivers/atm/idt77252.h
+++ b/drivers/atm/idt77252.h
@@ -766,7 +766,7 @@ struct idt77252_dev
#define SAR_RCTE_BUFFSTAT_MASK 0x00003000 /* buffer status */
#define SAR_RCTE_EFCI 0x00000800 /* EFCI Congestion flag */
#define SAR_RCTE_CLP 0x00000400 /* Cell Loss Priority flag */
-#define SAR_RCTE_CRC 0x00000200 /* Recieved CRC Error */
+#define SAR_RCTE_CRC 0x00000200 /* Received CRC Error */
#define SAR_RCTE_CELLCNT_MASK 0x000001FF /* cell Count */

#define SAR_RCTE_AAL0 0x00000000 /* AAL types for ALL field */
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9279272..eb0babc 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2424,7 +2424,7 @@ static int deregister_disk(ctlr_info_t *h, int drv_index,

--h->num_luns;

- /* if it was the last disk, find the new hightest lun */
+ /* if it was the last disk, find the new highest lun */
if (clear_all && recalculate_highest_lun) {
int newhighest = -1;
for (i = 0; i <= h->highest_lun; i++) {
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 3803a03..3adee60 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -1761,7 +1761,7 @@ static inline int _drbd_set_state(struct drbd_conf *mdev,
}

/**
- * drbd_request_state() - Reqest a state change
+ * drbd_request_state() - Request a state change
* @mdev: DRBD device.
* @mask: mask of state bits to change.
* @val: value of new state bits.
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
index b3bdb8a..43b3efc 100644
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -648,7 +648,7 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
goto fail_free_priv;
}

- /* Put FIFO at begginning of XDR buffer */
+ /* Put FIFO at beginning of XDR buffer */
priv->fifo_base = (u32 *) (priv->xdr_buf + FIFO_OFFSET);
priv->fifo_ptr = priv->fifo_base;

diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 829161e..17c5408 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -621,7 +621,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */

if (ace->data_result) {
- /* Error occured, disable the disk */
+ /* Error occurred, disable the disk */
ace->media_change = 1;
set_capacity(ace->gd, 0);
dev_err(ace->dev, "error fetching CF id (%i)\n",
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index dcc2a6e..551052d 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -966,7 +966,7 @@ static void btmrvl_sdio_remove(struct sdio_func *func)
MODULE_SHUTDOWN_REQ);
btmrvl_sdio_disable_host_int(card);
}
- BT_DBG("unregester dev");
+ BT_DBG("unregister dev");
btmrvl_sdio_unregister_dev(card);
btmrvl_remove_card(card->priv);
kfree(card);
diff --git a/drivers/char/mxser.h b/drivers/char/mxser.h
index 41878a6..0bf7943 100644
--- a/drivers/char/mxser.h
+++ b/drivers/char/mxser.h
@@ -113,7 +113,7 @@
#define MOXA_MUST_IIR_RTO 0x0C
#define MOXA_MUST_IIR_LSR 0x06

-/* recieved Xon/Xoff or specical interrupt pending */
+/* received Xon/Xoff or specical interrupt pending */
#define MOXA_MUST_IIR_XSC 0x10

/* RTS/CTS change state interrupt pending */
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 798f46a..894b9fe 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -911,8 +911,8 @@ static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan)

/**
* midc_handle_error - Handle DMA txn error
- * @mid: controller where error occured
- * @midc: chan where error occured
+ * @mid: controller where error occurred
+ * @midc: chan where error occurred
*
* Scan the descriptor for error
*/
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
index 709fecb..aea5ee8 100644
--- a/drivers/dma/intel_mid_dma_regs.h
+++ b/drivers/dma/intel_mid_dma_regs.h
@@ -174,8 +174,8 @@ union intel_mid_dma_cfg_hi {
* @dma: dma device struture pointer
* @busy: bool representing if ch is busy (active txn) or not
* @in_use: bool representing if ch is in use or not
- * @raw_tfr: raw trf interrupt recieved
- * @raw_block: raw block interrupt recieved
+ * @raw_tfr: raw trf interrupt received
+ * @raw_block: raw block interrupt received
*/
struct intel_mid_dma_chan {
struct dma_chan chan;
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 3d96534..71e6eac 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -823,7 +823,7 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci,
* There are a limited number of error logging registers that can
* be exausted. When all registers are exhausted and an additional
* error occurs then an error overflow register records that an
- * error occured and the type of error, but doesn't have any
+ * error occurred and the type of error, but doesn't have any
* further information. The ce/ue versions make for cleaner
* reporting logic and function interface - reduces conditional
* statement clutter and extra function arguments.
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1f4242b..5cbd171 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -212,7 +212,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
return MODE_PANEL;
}

- /* only refuse the mode on non eDP since we have seen some wierd eDP panels
+ /* only refuse the mode on non eDP since we have seen some weird eDP panels
which are outside spec tolerances but somehow work by magic */
if (!is_edp(intel_dp) &&
(intel_dp_link_required(connector->dev, intel_dp, mode->clock)
diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c
index 8870d72..de12edb 100644
--- a/drivers/gpu/drm/nouveau/nv40_graph.c
+++ b/drivers/gpu/drm/nouveau/nv40_graph.c
@@ -181,7 +181,7 @@ nv40_graph_load_context(struct nouveau_channel *chan)
NV40_PGRAPH_CTXCTL_CUR_LOADED);
/* 0x32E0 records the instance address of the active FIFO's PGRAPH
* context. If at any time this doesn't match 0x40032C, you will
- * recieve PGRAPH_INTR_CONTEXT_SWITCH
+ * receive PGRAPH_INTR_CONTEXT_SWITCH
*/
nv_wr32(dev, NV40_PFIFO_GRCTX_INSTANCE, inst);
return 0;
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 04b269d..4ff407a4 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -4995,7 +4995,7 @@ typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION

typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS
{
- USHORT usHight; // Image Hight
+ USHORT usHight; // Image Height
USHORT usWidth; // Image Width
UCHAR ucSurface; // Surface 1 or 2
UCHAR ucPadding[3];
@@ -5003,7 +5003,7 @@ typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS

typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2
{
- USHORT usHight; // Image Hight
+ USHORT usHight; // Image Height
USHORT usWidth; // Image Width
UCHAR ucSurface; // Surface 1 or 2
UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
@@ -5012,7 +5012,7 @@ typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2

typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3
{
- USHORT usHight; // Image Hight
+ USHORT usHight; // Image Height
USHORT usWidth; // Image Width
UCHAR ucSurface; // Surface 1 or 2
UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 56c48b6..f07b8fe 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1364,7 +1364,7 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
{
#if DRM_DEBUG_CODE
if (rdev->cp.count_dw <= 0) {
- DRM_ERROR("radeon: writting more dword to ring than expected !\n");
+ DRM_ERROR("radeon: writing more dword to ring than expected !\n");
}
#endif
rdev->cp.ring[rdev->cp.wptr++] = v;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index bfab60c..16ac5a5 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -371,7 +371,7 @@ static int vmw_fb_create_bo(struct vmw_private *vmw_priv,

ne_placement.lpfn = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;

- /* interuptable? */
+ /* interruptable? */
ret = ttm_write_lock(&vmw_priv->fbdev_master.lock, false);
if (unlikely(ret != 0))
return ret;
@@ -613,7 +613,7 @@ int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv,

ne_placement.lpfn = bo->num_pages;

- /* interuptable? */
+ /* interruptable? */
ret = ttm_write_lock(&vmw_priv->active_master->lock, false);
if (unlikely(ret != 0))
return ret;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index cceeb42..9ea870d 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -245,7 +245,7 @@ void vmw_kms_cursor_snoop(struct vmw_surface *srf,
/* TODO handle none page aligned offsets */
/* TODO handle partial uploads and pitch != 256 */
/* TODO handle more then one copy (size != 64) */
- DRM_ERROR("lazy programer, cant handle wierd stuff\n");
+ DRM_ERROR("lazy programer, cant handle weird stuff\n");
return;
}

diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index ace2b16..1f68731 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -151,7 +151,7 @@ static inline void vga_irq_set_state(struct vga_device *vgadev, bool state)
static void vga_check_first_use(void)
{
/* we should inform all GPUs in the system that
- * VGA arb has occured and to try and disable resources
+ * VGA arb has occurred and to try and disable resources
* if they can */
if (!vga_arbiter_used) {
vga_arbiter_used = true;
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index d678cf3..f6dbe56 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -306,7 +306,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
case HID_GLOBAL_ITEM_TAG_PUSH:

if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) {
- dbg_hid("global enviroment stack overflow\n");
+ dbg_hid("global environment stack overflow\n");
return -1;
}

@@ -317,7 +317,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
case HID_GLOBAL_ITEM_TAG_POP:

if (!parser->global_stack_ptr) {
- dbg_hid("global enviroment stack underflow\n");
+ dbg_hid("global environment stack underflow\n");
return -1;
}

diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h
index 64abb5b..4109a02 100644
--- a/drivers/hid/hid-roccat-kone.h
+++ b/drivers/hid/hid-roccat-kone.h
@@ -166,7 +166,7 @@ enum kone_mouse_events {
/* osd events are thought to be display on screen */
kone_mouse_event_osd_dpi = 0xa0,
kone_mouse_event_osd_profile = 0xb0,
- /* TODO clarify meaning and occurence of kone_mouse_event_calibration */
+ /* TODO clarify meaning and occurrence of kone_mouse_event_calibration */
kone_mouse_event_calibration = 0xc0,
kone_mouse_event_call_overlong_macro = 0xe0,
/* switch events notify if user changed values with mousebutton click */
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 3d21fa2..286e9085 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -131,7 +131,7 @@ int lis3lv02d_acpi_read(struct lis3lv02d *lis3, int reg, u8 *ret)
int lis3lv02d_acpi_write(struct lis3lv02d *lis3, int reg, u8 val)
{
struct acpi_device *dev = lis3->bus_priv;
- unsigned long long ret; /* Not used when writting */
+ unsigned long long ret; /* Not used when writing */
union acpi_object in_obj[2];
struct acpi_object_list args = { 2, in_obj };

diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index a610e78..fe92360 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -251,7 +251,7 @@ static inline int sht15_update_single_val(struct sht15_data *data,
enable_irq(gpio_to_irq(data->pdata->gpio_data));
if (gpio_get_value(data->pdata->gpio_data) == 0) {
disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
- /* Only relevant if the interrupt hasn't occured. */
+ /* Only relevant if the interrupt hasn't occurred. */
if (!atomic_read(&data->interrupt_handled))
schedule_work(&data->read_work);
}
@@ -452,7 +452,7 @@ static void sht15_bh_read_data(struct work_struct *work_s)
*/
atomic_set(&data->interrupt_handled, 0);
enable_irq(gpio_to_irq(data->pdata->gpio_data));
- /* If still not occured or another handler has been scheduled */
+ /* If still not occurred or another handler has been scheduled */
if (gpio_get_value(data->pdata->gpio_data)
|| atomic_read(&data->interrupt_handled))
return;
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 400a88b..17cf1ab 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -556,7 +556,7 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,

/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 5eebf56..6913910 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -22,7 +22,7 @@
* Frodo Looijaard <frodol@xxxxxx>, and also from Martin Bailey
* <mbailey@xxxxxxxxxxxxxxxxxx>
*
- * Partially rewriten by Oleg I. Vdovikin <vdovikin@xxxxxxx> to handle multiple
+ * Partially rewritten by Oleg I. Vdovikin <vdovikin@xxxxxxx> to handle multiple
* messages, proper stop/repstart signaling during receive, added detect code
*/

diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index f2de3be..75d1d9c 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -348,7 +348,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
tptr++;
}
/* Start transfer now */
- /* Enable RX/TX/Error interupts */
+ /* Enable RX/TX/Error interrupts */
out_8(&i2c_reg->i2cmr, I2CER_TXE | I2CER_TXB | I2CER_RXB);
out_8(&i2c_reg->i2cer, 0xff); /* Clear interrupt status */
/* Chip bug, set enable here */
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index e5b1a3b..00b44db 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -22,7 +22,7 @@
/* With some changes from KyÃsti MÃlkki <kmalkki@xxxxxxxxx> and even
Frodo Looijaard <frodol@xxxxxx> */

-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
+/* Partialy rewritten by Oleg I. Vdovikin for mmapped support of
for Alpha Processor Inc. UP-2000(+) boards */

#include <linux/kernel.h>
@@ -56,7 +56,7 @@ static int mmapped;
/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
this module in real supports only one device, due to missing arguments
in some functions, called from the algo-pcf module. Sometimes it's
- need to be rewriten - but for now just remove this for simpler reading */
+ need to be rewritten - but for now just remove this for simpler reading */

static wait_queue_head_t pcf_wait;
static int pcf_pending;
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
index c714927..46c6341 100644
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ b/drivers/i2c/busses/i2c-intel-mid.c
@@ -170,8 +170,8 @@ struct intel_mid_i2c_private {
/* Raw Interrupt Status Register */
#define IC_RAW_INTR_STAT 0x34 /* Read Only */
#define GEN_CALL (1 << 11) /* General call */
-#define START_DET (1 << 10) /* (RE)START occured */
-#define STOP_DET (1 << 9) /* STOP occured */
+#define START_DET (1 << 10) /* (RE)START occurred */
+#define STOP_DET (1 << 9) /* STOP occurred */
#define ACTIVITY (1 << 8) /* Bus busy */
#define RX_DONE (1 << 7) /* Not used in Master mode */
#define TX_ABRT (1 << 6) /* Transmit Abort */
@@ -353,7 +353,7 @@ static int intel_mid_i2c_disable(struct i2c_adapter *adap)
readl(i2c->base + IC_CLR_RX_DONE);
readl(i2c->base + IC_CLR_GEN_CALL);

- /* Disable all interupts */
+ /* Disable all interrupts */
writel(0x0000, i2c->base + IC_INTR_MASK);

return err;
@@ -455,7 +455,7 @@ static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
*
* By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
* distingushed. At present, no circumstances have been found out that
- * multiple errors would be occured simutaneously, so we simply use the
+ * multiple errors would be occurred simutaneously, so we simply use the
* register value directly.
*
* At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
@@ -469,7 +469,7 @@ static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)

/* Single transfer error check:
* According to databook, TX/RX FIFOs would be flushed when
- * the abort interrupt occured.
+ * the abort interrupt occurred.
*/
if (abort & ABRT_MASTER_DIS)
dev_err(&adap->dev,
@@ -569,7 +569,7 @@ static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
* Return Values:
* 0 if the read transfer succeeds
* -ETIMEDOUT if we cannot read the "raw" interrupt register
- * -EINVAL if a transfer abort occured
+ * -EINVAL if a transfer abort occurred
*
* For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
* data transfer. The actual "write" operation will be performed when the
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 1bdca49..b59d04c 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -8,8 +8,8 @@
*
* Documentation:
*
- * Publically available from Intel web site. Errata documentation
- * is also publically available. As an aide to anyone hacking on this
+ * Publicly available from Intel web site. Errata documentation
+ * is also publicly available. As an aide to anyone hacking on this
* driver the list of errata that are relevant is below.going back to
* PIIX4. Older device documentation is now a bit tricky to find.
*
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 7953447..e53a1b7 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -22,7 +22,7 @@
* Loosely based on the piix & svwks drivers.
*
* Documentation:
- * Not publically available.
+ * Not publicly available.
*/

#include <linux/types.h>
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index d2a0997..f46f49c 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -14,7 +14,7 @@
* Andre Hedrick
*
* Documentation:
- * Obsolete device documentation publically available from via.com.tw
+ * Obsolete device documentation publicly available from via.com.tw
* Current device documentation available under NDA only
*/

diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index c0a03ac..6ee41b4 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -890,7 +890,7 @@ void ipath_clear_freeze(struct ipath_devdata *dd)
/* disable error interrupts, to avoid confusion */
ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL);

- /* also disable interrupts; errormask is sometimes overwriten */
+ /* also disable interrupts; errormask is sometimes overwritten */
ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);

ipath_cancel_sends(dd, 1);
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index 1f95bba..edfe687 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -289,7 +289,7 @@ again:
goto clr_busy;
wqe = get_swqe_ptr(sqp, sqp->s_last);

- /* Return if it is not OK to start a new work reqeust. */
+ /* Return if it is not OK to start a new work request. */
if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
if (!(ib_ipath_state_ops[sqp->state] & IPATH_FLUSH_SEND))
goto clr_busy;
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 774dea8..f605b38 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -705,7 +705,7 @@ static void qib_6120_clear_freeze(struct qib_devdata *dd)
/* disable error interrupts, to avoid confusion */
qib_write_kreg(dd, kr_errmask, 0ULL);

- /* also disable interrupts; errormask is sometimes overwriten */
+ /* also disable interrupts; errormask is sometimes overwritten */
qib_6120_set_intr_state(dd, 0);

qib_cancel_sends(dd->pport);
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index de799f1..c9bb402 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -1256,7 +1256,7 @@ static void qib_7220_clear_freeze(struct qib_devdata *dd)
/* disable error interrupts, to avoid confusion */
qib_write_kreg(dd, kr_errmask, 0ULL);

- /* also disable interrupts; errormask is sometimes overwriten */
+ /* also disable interrupts; errormask is sometimes overwritten */
qib_7220_set_intr_state(dd, 0);

qib_cancel_sends(dd->pport);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index b01809a..d0950f7 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -1950,7 +1950,7 @@ static void qib_7322_clear_freeze(struct qib_devdata *dd)
qib_write_kreg_port(dd->pport + pidx, krp_errmask,
0ULL);

- /* also disable interrupts; errormask is sometimes overwriten */
+ /* also disable interrupts; errormask is sometimes overwritten */
qib_7322_set_intr_state(dd, 0);

/* clear the freeze, and be sure chip saw it */
diff --git a/drivers/infiniband/hw/qib/qib_keys.c b/drivers/infiniband/hw/qib/qib_keys.c
index 8fd19a4..e963966 100644
--- a/drivers/infiniband/hw/qib/qib_keys.c
+++ b/drivers/infiniband/hw/qib/qib_keys.c
@@ -307,7 +307,7 @@ bail:
}

/*
- * Initialize the memory region specified by the work reqeust.
+ * Initialize the memory region specified by the work request.
*/
int qib_fast_reg_mr(struct qib_qp *qp, struct ib_send_wr *wr)
{
diff --git a/drivers/infiniband/hw/qib/qib_mad.h b/drivers/infiniband/hw/qib/qib_mad.h
index 147aff9..7840ab5 100644
--- a/drivers/infiniband/hw/qib/qib_mad.h
+++ b/drivers/infiniband/hw/qib/qib_mad.h
@@ -73,7 +73,7 @@ struct ib_mad_notice_attr {

struct {
__be16 reserved;
- __be16 lid; /* LID where change occured */
+ __be16 lid; /* LID where change occurred */
u8 reserved2;
u8 local_changes; /* low bit - local changes */
__be32 new_cap_mask; /* new capability mask */
diff --git a/drivers/infiniband/hw/qib/qib_ruc.c b/drivers/infiniband/hw/qib/qib_ruc.c
index eb78d93..d1823b9 100644
--- a/drivers/infiniband/hw/qib/qib_ruc.c
+++ b/drivers/infiniband/hw/qib/qib_ruc.c
@@ -381,7 +381,7 @@ again:
goto clr_busy;
wqe = get_swqe_ptr(sqp, sqp->s_last);

- /* Return if it is not OK to start a new work reqeust. */
+ /* Return if it is not OK to start a new work request. */
if (!(ib_qib_state_ops[sqp->state] & QIB_PROCESS_NEXT_SEND_OK)) {
if (!(ib_qib_state_ops[sqp->state] & QIB_FLUSH_SEND))
goto clr_busy;
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index a93c525..fc62256 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -312,7 +312,7 @@ static void keyspan_check_data(struct usb_keyspan *remote)
remote->data.tester = remote->data.tester >> 5;
remote->data.bits_left -= 5;
} else {
- err("Bad message recieved, no stop bit found.\n");
+ err("Bad message received, no stop bit found.\n");
}

dev_dbg(&remote->udev->dev,
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index ee82851..5d1666a 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -619,7 +619,7 @@ exit:
* device, resulting in trackpad malfunction under certain
* circumstances. To get around this problem, there is at least one
* example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
- * recieve a reset_resume request rather than the normal resume.
+ * receive a reset_resume request rather than the normal resume.
* Since the implementation of reset_resume is equal to mode switch
* plus start_traffic, it seems easier to always do the switch when
* starting traffic on the device.
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index c9983ae..b8074bd 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -215,7 +215,7 @@ static const struct ps2pp_info *get_model_info(unsigned char model)
{ 61, PS2PP_KIND_MX, /* MX700 */
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN },
- { 66, PS2PP_KIND_MX, /* MX3100 reciver */
+ { 66, PS2PP_KIND_MX, /* MX3100 receiver */
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
{ 72, PS2PP_KIND_TRACKMAN, 0 }, /* T-CH11: TrackMan Marble */
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index bf2c0c8..eb9a3cf 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -334,7 +334,7 @@ static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
* M: manufacturer location code
* R: revision code
* E: Error code. If it's in the range of 0x00..0x1f, only some
- * minor problem occured. Errors >= 0x20 are considered bad
+ * minor problem occurred. Errors >= 0x20 are considered bad
* and the device may not work properly...
* D: <0010> == mouse, <0100> == tablet
*/
diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index 64ecc6f..dafc0f9 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -1627,7 +1627,7 @@ mISDNipac_init(struct ipac_hw *ipac, void *hw)
ipac->hscx[i].bch.hw = hw;
ipac->hscx[i].ip = ipac;
/* default values for IOM time slots
- * can be overwriten by card */
+ * can be overwritten by card */
ipac->hscx[i].slot = (i == 0) ? 0x2f : 0x03;
}

diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c
index 9e84870..3c376df 100644
--- a/drivers/isdn/hardware/mISDN/w6692.c
+++ b/drivers/isdn/hardware/mISDN/w6692.c
@@ -779,7 +779,7 @@ w6692_irq(int intno, void *dev_id)
spin_lock(&card->lock);
ista = ReadW6692(card, W_ISTA);
if ((ista | card->imask) == card->imask) {
- /* possible a shared IRQ reqest */
+ /* possible a shared IRQ request */
spin_unlock(&card->lock);
return IRQ_NONE;
}
diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c
index 5d72783..6ce042b 100644
--- a/drivers/isdn/hisax/amd7930_fn.c
+++ b/drivers/isdn/hisax/amd7930_fn.c
@@ -628,7 +628,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg)
if ((cs->dc.amd7930.ph_state == 8)) {
/* b-channels off, PH-AR cleared
* change to F3 */
- Amd7930_ph_command(cs, 0x20, "HW_RESET REQEST"); //LMR1 bit 5
+ Amd7930_ph_command(cs, 0x20, "HW_RESET REQUEST"); //LMR1 bit 5
spin_unlock_irqrestore(&cs->lock, flags);
} else {
Amd7930_ph_command(cs, 0x40, "HW_RESET REQUEST");
diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c
index 0e66af1..5aa64ec 100644
--- a/drivers/isdn/hisax/avm_pci.c
+++ b/drivers/isdn/hisax/avm_pci.c
@@ -653,7 +653,7 @@ avm_pcipnp_interrupt(int intno, void *dev_id)
spin_lock_irqsave(&cs->lock, flags);
sval = inb(cs->hw.avm.cfg_reg + 2);
if ((sval & AVM_STATUS0_IRQ_MASK) == AVM_STATUS0_IRQ_MASK) {
- /* possible a shared IRQ reqest */
+ /* possible a shared IRQ request */
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_NONE;
}
diff --git a/drivers/isdn/hisax/elsa.c b/drivers/isdn/hisax/elsa.c
index 5d9d338..6d097f5 100644
--- a/drivers/isdn/hisax/elsa.c
+++ b/drivers/isdn/hisax/elsa.c
@@ -70,7 +70,7 @@ static const char *ITACVer[] =
/* PCI stuff */
#define ELSA_PCI_IRQ_MASK 0x04

-/* ITAC Registeradressen (only Microlink PC) */
+/* ITAC register addresses (only Microlink PC) */
#define ITAC_SYS 0x34
#define ITAC_ISEN 0x48
#define ITAC_RFIE 0x4A
diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index 8b0a7d8..5e3e458 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -659,7 +659,7 @@ fcpci2_irq(int intno, void *dev)

val = inb(adapter->io + AVM_STATUS0);
if (!(val & AVM_STATUS0_IRQ_MASK))
- /* hopefully a shared IRQ reqest */
+ /* hopefully a shared IRQ request */
return IRQ_NONE;
DBG(2, "STATUS0 %#x", val);
if (val & AVM_STATUS0_IRQ_ISAC)
@@ -679,7 +679,7 @@ fcpci_irq(int intno, void *dev)

sval = inb(adapter->io + 2);
if ((sval & AVM_STATUS0_IRQ_MASK) == AVM_STATUS0_IRQ_MASK)
- /* possibly a shared IRQ reqest */
+ /* possibly a shared IRQ request */
return IRQ_NONE;
DBG(2, "sval %#x", sval);
if (!(sval & AVM_STATUS0_IRQ_ISAC))
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index cc6ee2d..ddf8fae 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -1595,7 +1595,7 @@ l3dss1_setup(struct l3_process *pc, u_char pr, void *arg)
* Bearer Capabilities
*/
p = skb->data;
- /* only the first occurence 'll be detected ! */
+ /* only the first occurrence 'll be detected ! */
if ((p = findie(p, skb->len, 0x04, 0))) {
if ((p[1] < 2) || (p[1] > 11))
err = 1;
diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index b8a1098..d497db0 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -954,7 +954,7 @@ isdnloop_parse_cmd(isdnloop_card * card)
/*
* Put command-strings into the of the 'card'. In reality, execute them
* right in place by calling isdnloop_parse_cmd(). Also copy every
- * command to the read message ringbuffer, preceeding it with a '>'.
+ * command to the read message ringbuffer, preceding it with a '>'.
* These mesagges can be read at /dev/isdnctrl.
*
* Parameter:
diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c
index 9ae2d33..f950782 100644
--- a/drivers/isdn/mISDN/dsp_dtmf.c
+++ b/drivers/isdn/mISDN/dsp_dtmf.c
@@ -106,7 +106,7 @@ void dsp_dtmf_hardware(struct dsp *dsp)
* tested it allot. it even works with very short tones (40ms). the only
* disadvantage is, that it doesn't work good with different volumes of both
* tones. this will happen, if accoustically coupled dialers are used.
- * it sometimes detects tones during speach, which is normal for decoders.
+ * it sometimes detects tones during speech, which is normal for decoders.
* use sequences to given commands during calls.
*
* dtmf - points to a structure of the current dtmf state
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index dad011a..7771ed2 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -419,7 +419,7 @@ void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio)
/*
* Possible cases:
* 1) DM_RH_DIRTY
- * 2) DM_RH_NOSYNC: was dirty, other preceeding writes failed
+ * 2) DM_RH_NOSYNC: was dirty, other preceding writes failed
* 3) DM_RH_RECOVERING: flushing pending writes
* Either case, the region should have not been connected to list.
*/
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 7e90b85..c95def5 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -94,7 +94,7 @@ struct mdk_rdev_s
#define In_sync 2 /* device is in_sync with rest of array */
#define WriteMostly 4 /* Avoid reading if at all possible */
#define AutoDetected 7 /* added by auto-detect */
-#define Blocked 8 /* An error occured on an externally
+#define Blocked 8 /* An error occurred on an externally
* managed array, don't allow writes
* until it is cleared */
wait_queue_head_t blocked_wait;
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 74ee172..8434c0c 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -161,7 +161,7 @@ static int saa7146_i2c_reset(struct saa7146_dev *dev)
msleep(SAA7146_I2C_DELAY);
}

- /* if any error is still present, a fatal error has occured ... */
+ /* if any error is still present, a fatal error has occurred ... */
status = saa7146_i2c_status(dev);
if ( dev->i2c_bitrate != status ) {
DEB_I2C(("fatal error. status:0x%08x\n",status));
@@ -326,9 +326,9 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m
if ( 0 != err) {
/* this one is unsatisfying: some i2c slaves on some
dvb cards don't acknowledge correctly, so the saa7146
- thinks that an address error occured. in that case, the
+ thinks that an address error occurred. in that case, the
transaction should be retrying, even if an address error
- occured. analog saa7146 based cards extensively rely on
+ occurred. analog saa7146 based cards extensively rely on
i2c address probing, however, and address errors indicate that a
device is really *not* there. retrying in that case
increases the time the device needs to probe greatly, so
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 605e28b..0d6e094 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -106,7 +106,7 @@ enum {
/* MXL5005 Tuner Register Struct */
struct TunerReg {
u16 Reg_Num; /* Tuner Register Address */
- u16 Reg_Val; /* Current sw programmed value waiting to be writen */
+ u16 Reg_Val; /* Current sw programmed value waiting to be written */
};

enum {
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 227c020..9552540 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -58,7 +58,7 @@ struct flexcop_pci {

int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
u32 last_dma1_cur_pos;
- /* position of the pointer last time the timer/packet irq occured */
+ /* position of the pointer last time the timer/packet irq occurred */
int count;
int count_prev;
int stream_problem;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index cad6634..312bf46 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1638,7 +1638,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
case FE_READ_STATUS: {
fe_status_t* status = parg;

- /* if retune was requested but hasn't occured yet, prevent
+ /* if retune was requested but hasn't occurred yet, prevent
* that user get signal state from previous tuning */
if (fepriv->state == FESTATE_RETUNE ||
fepriv->state == FESTATE_ERROR) {
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 65fa926..236f085 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -322,7 +322,7 @@ struct usb_data_stream {
* struct dvb_usb_adapter - a DVB adapter on a USB device
* @id: index of this adapter (starting with 0).
*
- * @feedcount: number of reqested feeds (used for streaming-activation)
+ * @feedcount: number of requested feeds (used for streaming-activation)
* @pid_filtering: is hardware pid_filtering used or not.
*
* @pll_addr: I2C address of the tuner for programming
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index 9eea418..d7d2b9f 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -306,7 +306,7 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap)
lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
- info("INT Interupt Service Started");
+ info("INT Interrupt Service Started");

return 0;
}
@@ -427,7 +427,7 @@ static int lme2510_msg(struct dvb_usb_device *d,
break;
}

- deb_info(4, "I2C From Interupt Message out(%02x) in(%02x)",
+ deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)",
wbuf[3], rbuf[1]);

}
@@ -580,11 +580,11 @@ static int lme2510_int_service(struct dvb_usb_adapter *adap)
}
d->rc_dev = rc;

- /* Start the Interupt */
+ /* Start the Interrupt */
ret = lme2510_int_read(adap);
if (ret < 0) {
rc_unregister_device(rc);
- info("INT Unable to start Interupt Service");
+ info("INT Unable to start Interrupt Service");
return -ENODEV;
}

@@ -888,7 +888,7 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
return -ENODEV;
}

- /* Start the Interupt & Remote*/
+ /* Start the Interrupt & Remote*/
ret = lme2510_int_service(adap);

return ret;
@@ -1060,7 +1060,7 @@ void *lme2510_exit_int(struct dvb_usb_device *d)
usb_kill_urb(st->lme_urb);
usb_free_coherent(d->udev, 5000, st->buffer,
st->lme_urb->transfer_dma);
- info("Interupt Service Stopped");
+ info("Interrupt Service Stopped");
rc_unregister_device(d->rc_dev);
info("Remote Stopped");
}
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
index c7f5ccf..b0ca946 100644
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -322,7 +322,7 @@ static int dib7000m_sad_calib(struct dib7000m_state *state)
{

/* internal */
-// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writing in set_bandwidth
dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096

diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 6aa02cb..2a13127 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -293,7 +293,7 @@ static int dib7000p_set_bandwidth(struct dib7000p_state *state, u32 bw)
static int dib7000p_sad_calib(struct dib7000p_state *state)
{
/* internal */
-// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writing in set_bandwidth
dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096

diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index e87b747..17f8cdf 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -225,7 +225,7 @@ static int s5h1420_recv_slave_reply (struct dvb_frontend* fe,
unsigned long timeout;
int result = 0;

- /* setup for DISEQC recieve */
+ /* setup for DISEQC receive */
val = s5h1420_readreg(state, 0x3b);
s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */
msleep(15);
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 6ca6713..d6baa79 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -299,7 +299,7 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
* although one packet has been transfered.
* [3] Sometimes (actually rarely), the card gets into an erroneous
* mode where it continuously generates interrupts, claiming it
- * has recieved nbpackets>TS_DMA_PACKETS packets, but no packet
+ * has received nbpackets>TS_DMA_PACKETS packets, but no packet
* has been transfered. Only a reset seems to solve this
*/
if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
@@ -332,7 +332,7 @@ static irqreturn_t pluto_irq(int irq, void *dev_id)
struct pluto *pluto = dev_id;
u32 tscr;

- /* check whether an interrupt occured on this device */
+ /* check whether an interrupt occurred on this device */
tscr = pluto_readreg(pluto, REG_TSCR);
if (!(tscr & (TSCR_DE | TSCR_OVR)))
return IRQ_NONE;
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index fe1b803..f893bff 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -234,7 +234,7 @@ static void ttusb_dec_handle_irq( struct urb *urb)
* (with buffer[3] == 0x40) in an intervall of ~100ms.
* But to handle this correctly we had to imlemenent some
* kind of timer which signals a 'key up' event if no
- * keyrepeat signal is recieved for lets say 200ms.
+ * keyrepeat signal is received for lets say 200ms.
* this should/could be added later ...
* for now lets report each signal as a key down and up*/
dprintk("%s:rc signal:%d\n", __func__, buffer[4]);
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 273d9d6..f93f42a 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -503,7 +503,7 @@ static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier)
* in interrupt_handler:
* 5) send all data out
* go back to write():
- * 6) disable TX interrupts, re-enable RX interupts
+ * 6) disable TX interrupts, re-enable RX interrupts
*
* The key problem of this function is user space data may larger than
* driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 512a2f4..4b3f63f 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -255,7 +255,7 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,
* @rc_map: scancode table to be searched
* @scancode: the desired scancode
* @resize: controls whether we allowed to resize the table to
- * accomodate not yet present scancodes
+ * accommodate not yet present scancodes
* @return: index of the mapping containing scancode in question
* or -1U in case of failure.
*
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 55ffd60..6647033 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -383,7 +383,7 @@ static int cafe_smbus_write_data(struct cafe_camera *cam,
* causes the device to die.
* Use a busy-wait because we often send a large quantity of small
* commands at-once; using msleep() would cause a lot of context
- * switches which take longer than 2ms, resulting in a noticable
+ * switches which take longer than 2ms, resulting in a noticeable
* boot-time and capture-start delays.
*/
mdelay(2);
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 62e41ab..3c47299 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -211,8 +211,8 @@ struct cx23885_board {

/* Vendors can and do run the PCIe bridge at different
* clock rates, driven physically by crystals on the PCBs.
- * The core has to accomodate this. This allows the user
- * to add new boards with new frequencys. The value is
+ * The core has to accommodate this. This allows the user
+ * to add new boards with new frequencies. The value is
* expressed in Hz.
*
* The core framework will default this value based on
diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
index 490aafb..b3fe98d 100644
--- a/drivers/media/video/davinci/dm644x_ccdc.c
+++ b/drivers/media/video/davinci/dm644x_ccdc.c
@@ -258,7 +258,7 @@ static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params)
/*
* Allocate memory for FPC table if current
* FPC table buffer is not big enough to
- * accomodate FPC Number requested
+ * accommodate FPC Number requested
*/
if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) {
if (fpc_physaddr != NULL) {
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index d6f39ce..ce616ac 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1114,7 +1114,7 @@ static const u8 ov7660_sensor_param1[][8] = {
/* {0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10}, * BLUE */
/****** (some exchanges in the win trace) ******/
/*fixme:param2*/
- {0xa1, 0x21, 0x93, 0x00, 0x00, 0x00, 0x00, 0x10},/* dummy line hight */
+ {0xa1, 0x21, 0x93, 0x00, 0x00, 0x00, 0x00, 0x10},/* dummy line high */
{0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10}, /* dummy line low */
{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCH */
{0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCL */
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index f7ef282..cada74e 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -1715,7 +1715,7 @@ static const __u16 spca501c_mysterious_init_data[][3] = {
{0x00, 0x0080, 0x0021}, /* 640 */
{0x00, 0x0001, 0x0022},
{0x00, 0x00e0, 0x0023}, /* 480 */
- {0x00, 0x0000, 0x0024}, /* Offset H hight */
+ {0x00, 0x0000, 0x0024}, /* Offset H high */
{0x00, 0x00d3, 0x0025}, /* low */
{0x00, 0x0000, 0x0026}, /* Offset V */
{0x00, 0x000d, 0x0027}, /* low */
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 47236a5..d46e0bd 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -5740,7 +5740,7 @@ static u16 i2c_read(struct gspca_dev *gspca_dev,
if (retbyte != 0x00)
err("i2c_r status error %02x", retbyte);
retval = reg_r_i(gspca_dev, 0x0095); /* read Lowbyte */
- retval |= reg_r_i(gspca_dev, 0x0096) << 8; /* read Hightbyte */
+ retval |= reg_r_i(gspca_dev, 0x0096) << 8; /* read Highbyte */
PDEBUG(D_USBI, "i2c r [%02x] -> %04x (%02x)",
reg, retval, retbyte);
return retval;
diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c
index 4df0194..0f27f5b 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.c
+++ b/drivers/media/video/ivtv/ivtv-firmware.c
@@ -377,7 +377,7 @@ int ivtv_firmware_check(struct ivtv *itv, char *where)
"Reloading\n", where);
res = ivtv_firmware_restart(itv);
/*
- * Even if restarted ok, still signal a problem had occured.
+ * Even if restarted ok, still signal a problem had occurred.
* The caller can come through this function again to check
* if things are really ok after the restart.
*/
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index cf93de9..336180b 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -1038,7 +1038,7 @@ static int ov6650_reset(struct i2c_client *client)
ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0);
if (ret)
dev_err(&client->dev,
- "An error occured while entering soft reset!\n");
+ "An error occurred while entering soft reset!\n");

return ret;
}
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 53d88a2..5173ac4 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -273,7 +273,7 @@ static int ov9640_reset(struct i2c_client *client)
ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET);
if (ret)
dev_err(&client->dev,
- "An error occured while entering soft reset!\n");
+ "An error occurred while entering soft reset!\n");

return ret;
}
diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index a97ae17..135a6e4 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -257,7 +257,7 @@ out:
}

/* Wait for a signal event, without holding a mutex. Either return TIMEOUT if
- * the event never occured, or SAA_OK if it was signaled during the wait.
+ * the event never occurred, or SAA_OK if it was signaled during the wait.
*/
int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
{
diff --git a/drivers/media/video/stk-sensor.c b/drivers/media/video/stk-sensor.c
index e546b01..5d0f84c 100644
--- a/drivers/media/video/stk-sensor.c
+++ b/drivers/media/video/stk-sensor.c
@@ -502,7 +502,7 @@ int stk_sensor_configure(struct stk_camera *dev)
int com7;
/*
* We setup the sensor to output dummy lines in low-res modes,
- * so we don't get absurdly hight framerates.
+ * so we don't get absurdly high framerates.
*/
unsigned dummylines;
int flip;
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 5673d67..d270f24 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -390,7 +390,7 @@ int uvc_commit_video(struct uvc_streaming *stream,
*
* uvc_video_decode_end is called with header data at the end of a bulk or
* isochronous payload. It performs any additional header data processing and
- * returns 0 or a negative error code if an error occured. As header data have
+ * returns 0 or a negative error code if an error occurred. As header data have
* already been processed by uvc_video_decode_start, this functions isn't
* required to perform sanity checks a second time.
*
@@ -654,7 +654,7 @@ static void uvc_video_decode_bulk(struct urb *urb, struct uvc_streaming *stream,
buf);
} while (ret == -EAGAIN);

- /* If an error occured skip the rest of the payload. */
+ /* If an error occurred skip the rest of the payload. */
if (ret < 0 || buf == NULL) {
stream->bulk.skip_payload = 1;
} else {
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 8b04810..f16e7cc 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -56,9 +56,9 @@
#define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE (0x0003E000) /* Tried to upload from flash, but there is none */
#define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE (0x0003E001) /* ImageType field contents were invalid */
#define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
-#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
-#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occured while attempting to upload single flash region */
-#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occured while DMAing FW to host memory */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occurred while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occurred while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occurred while DMAing FW to host memory */

#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */

@@ -187,8 +187,8 @@
#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD (0x00005000)

#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occurred on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occurred on SMP Write */
#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
diff --git a/drivers/message/fusion/lsi/mpi_raid.h b/drivers/message/fusion/lsi/mpi_raid.h
index add60cc..0f2c8b4 100644
--- a/drivers/message/fusion/lsi/mpi_raid.h
+++ b/drivers/message/fusion/lsi/mpi_raid.h
@@ -217,7 +217,7 @@ typedef struct _MSG_SCSI_IO_RAID_PT_REPLY

/****************************************************************************/
-/* Mailbox reqeust structure */
+/* Mailbox request structure */
/****************************************************************************/

typedef struct _MSG_MAILBOX_REQUEST
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 3358c0a..7cd44b1 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -7900,7 +7900,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
"Owner", /* 15h */
"Open Transmit DMA Abort", /* 16h */
"IO Device Missing Delay Retry", /* 17h */
- "IO Cancelled Due to Recieve Error", /* 18h */
+ "IO Cancelled Due to Receive Error", /* 18h */
NULL, /* 19h */
NULL, /* 1Ah */
NULL, /* 1Bh */
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index a3856ed..f79d5a2 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -2398,7 +2398,7 @@ done_free_mem:
}

/* mf is null if command issued successfully
- * otherwise, failure occured after mf acquired.
+ * otherwise, failure occurred after mf acquired.
*/
if (mf)
mpt_free_msg_frame(ioc, mf);
diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c
index c73cef2..cce7b63 100644
--- a/drivers/misc/iwmc3200top/main.c
+++ b/drivers/misc/iwmc3200top/main.c
@@ -268,7 +268,7 @@ static void iwmct_irq_read_worker(struct work_struct *ws)
LOG_INFO(priv, IRQ, "ACK barker arrived "
"- starting FW download\n");
} else { /* REBOOT barker */
- LOG_INFO(priv, IRQ, "Recieved reboot barker: %x\n", barker);
+ LOG_INFO(priv, IRQ, "Received reboot barker: %x\n", barker);
priv->barker = barker;

if (barker & BARKER_DNLOAD_SYNC_MSK) {
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 59c118c..b076b0c 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -645,7 +645,7 @@ static int validate_simple_test(char *put_str)

while (*chk_str != '\0' && *put_str != '\0') {
/* If someone does a * to match the rest of the string, allow
- * it, or stop if the recieved string is complete.
+ * it, or stop if the received string is complete.
*/
if (*put_str == '#' || *chk_str == '*')
return 0;
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 34749ee..9e9bdda 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -229,7 +229,7 @@ again:
bid = blade_id < 0 ? uv_numa_blade_id() : blade_id;
bs = gru_base[bid];

- /* Handle the case where migration occured while waiting for the sema */
+ /* Handle the case where migration occurred while waiting for the sema */
down_read(&bs->bs_kgts_sema);
if (blade_id < 0 && bid != uv_numa_blade_id()) {
up_read(&bs->bs_kgts_sema);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 60842f8..f3b22bf 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -105,7 +105,7 @@ int mmc_go_idle(struct mmc_host *host)
* that in case of hardware that won't pull up DAT3/nCS otherwise.
*
* SPI hosts ignore ios.chip_select; it's managed according to
- * rules that must accomodate non-MMC slaves which this layer
+ * rules that must accommodate non-MMC slaves which this layer
* won't even know about.
*/
if (!mmc_host_is_spi(host)) {
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index ad2a7a0..a3b2bb8 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -127,7 +127,7 @@ struct atmel_mci_dma {
* EVENT_DATA_COMPLETE is set in @pending_events, all data-related
* interrupts must be disabled and @data_status updated with a
* snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
* snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
* bytes_xfered field of @data must be written. This is ensured by
* using barriers.
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index a8c3e1c..ce5d394 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1269,12 +1269,12 @@ static int inval_cache_and_wait_for_operation(
mutex_lock(&chip->mutex);
}
if (chip->erase_suspended && chip_state == FL_ERASING) {
- /* Erase suspend occured while sleep: reset timeout */
+ /* Erase suspend occurred while sleep: reset timeout */
timeo = reset_timeo;
chip->erase_suspended = 0;
}
if (chip->write_suspended && chip_state == FL_WRITING) {
- /* Write suspend occured while sleep: reset timeout */
+ /* Write suspend occurred while sleep: reset timeout */
timeo = reset_timeo;
chip->write_suspended = 0;
}
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index 04fdfcc..28bdc1c 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -171,7 +171,7 @@ static int wait_for_ready(struct map_info *map, struct flchip *chip,
mutex_lock(&chip->mutex);
}
if (chip->erase_suspended || chip->write_suspended) {
- /* Suspend has occured while sleep: reset timeout */
+ /* Suspend has occurred while sleep: reset timeout */
timeo = reset_timeo;
chip->erase_suspended = chip->write_suspended = 0;
}
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index c09f4f5..7e643c8 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -42,7 +42,7 @@
*
* Please note:
* 1. The flash size given should be the largest flash size that can
- * be accomodated.
+ * be accommodated.
*
* 2. The bus width must defined in clps_setup_flash.
*
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index acb13fa..64aea6a 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -3,7 +3,7 @@
* Config with both CFI and JEDEC device support.
*
* Basically physmap.c with the addition of partitions and
- * an array of mapping info to accomodate more than one flash type per board.
+ * an array of mapping info to accommodate more than one flash type per board.
*
* Copyright 2005-2007 PMC-Sierra, Inc.
*
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 145b3d0d..4c36ef6 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -234,7 +234,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
* the data. For our userspace tools it is important
* to dump areas with ecc errors !
* For kernel internal usage it also might return -EUCLEAN
- * to signal the caller that a bitflip has occured and has
+ * to signal the caller that a bitflip has occurred and has
* been corrected by the ECC algorithm.
* Userspace software which accesses NAND this way
* must be aware of the fact that it deals with NAND
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index b7f8de7..39cd047 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -137,7 +137,7 @@ static struct rs_control *rs_decoder;
*
* Fabrice Bellard figured this out in the old docecc code. I added
* some comments, improved a minor bit and converted it to make use
- * of the generic Reed-Solomon libary. tglx
+ * of the generic Reed-Solomon library. tglx
*/
static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
{
@@ -986,7 +986,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
dummy = ReadDOC(docptr, ECCConf);
}

- /* Error occured ? */
+ /* Error occurred ? */
if (dummy & 0x80) {
for (i = 0; i < 6; i++) {
if (DoC_is_MillenniumPlus(doc))
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index d9d7efb..d7dfa65 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -766,7 +766,7 @@ static irqreturn_t r852_irq(int irq, void *data)
ret = IRQ_HANDLED;
dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);

- /* we shouldn't recieve any interrupts if we wait for card
+ /* we shouldn't receive any interrupts if we wait for card
to settle */
WARN_ON(dev->card_unstable);

@@ -794,13 +794,13 @@ static irqreturn_t r852_irq(int irq, void *data)
ret = IRQ_HANDLED;

if (dma_status & R852_DMA_IRQ_ERROR) {
- dbg("recieved dma error IRQ");
+ dbg("received dma error IRQ");
r852_dma_done(dev, -EIO);
complete(&dev->dma_done);
goto out;
}

- /* recieved DMA interrupt out of nowhere? */
+ /* received DMA interrupt out of nowhere? */
WARN_ON_ONCE(dev->dma_stage == 0);

if (dev->dma_stage == 0)
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 546c2f0..81bbb5e 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -78,7 +78,7 @@ static void start_translation(struct sh_flctl *flctl)

static void timeout_error(struct sh_flctl *flctl, const char *str)
{
- dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str);
+ dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
}

static void wait_completion(struct sh_flctl *flctl)
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 2ca880b..69ee7c1 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1170,7 +1170,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
/* Check if Receive Interrupt has occurred. */
if (intr0 & RINT0) {
if (napi_schedule_prep(&lp->napi)) {
- /* Disable receive interupts */
+ /* Disable receive interrupts */
writel(RINTEN0, mmio + INTEN0);
/* Schedule a polling routine */
__napi_schedule(&lp->napi);
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
index b5926af..854323e 100644
--- a/drivers/net/amd8111e.h
+++ b/drivers/net/amd8111e.h
@@ -754,7 +754,7 @@ struct amd8111e_priv{
const char *name;
struct pci_dev *pci_dev; /* Ptr to the associated pci_dev */
struct net_device* amd8111e_net_dev; /* ptr to associated net_device */
- /* Transmit and recive skbs */
+ /* Transmit and receive skbs */
struct sk_buff *tx_skbuff[NUM_TX_BUFFERS];
struct sk_buff *rx_skbuff[NUM_RX_BUFFERS];
/* Transmit and receive dma mapped addr */
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index aa07657..f251fe0 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -412,7 +412,7 @@ ks8695_tx_irq(int irq, void *dev_id)
* Interrupt Status Register (Offset 0xF208)
* Bit29: WAN MAC Receive Status
* Bit16: LAN MAC Receive Status
- * So, this Rx interrrupt enable/status bit number is equal
+ * So, this Rx interrupt enable/status bit number is equal
* as Rx IRQ number.
*/
static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c
index 1bf6720..fc3cbb0 100644
--- a/drivers/net/atl1c/atl1c_hw.c
+++ b/drivers/net/atl1c/atl1c_hw.c
@@ -56,7 +56,7 @@ void atl1c_hw_set_mac_addr(struct atl1c_hw *hw)
(((u32)hw->mac_addr[4]) << 8) |
(((u32)hw->mac_addr[5])) ;
AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
- /* hight dword */
+ /* high dword */
value = (((u32)hw->mac_addr[0]) << 8) |
(((u32)hw->mac_addr[1])) ;
AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c
index 76cc043..d9ae31f 100644
--- a/drivers/net/atl1e/atl1e_hw.c
+++ b/drivers/net/atl1e/atl1e_hw.c
@@ -55,7 +55,7 @@ void atl1e_hw_set_mac_addr(struct atl1e_hw *hw)
(((u32)hw->mac_addr[4]) << 8) |
(((u32)hw->mac_addr[5])) ;
AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
- /* hight dword */
+ /* high dword */
value = (((u32)hw->mac_addr[0]) << 8) |
(((u32)hw->mac_addr[1])) ;
AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index 4e6f4e9..fd65777 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -2751,7 +2751,7 @@ static void atl2_set_mac_addr(struct atl2_hw *hw)
(((u32)hw->mac_addr[4]) << 8) |
(((u32)hw->mac_addr[5]));
ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
- /* hight dword */
+ /* high dword */
value = (((u32)hw->mac_addr[0]) << 8) |
(((u32)hw->mac_addr[1]));
ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 22abfb3..fd122fd 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -194,7 +194,7 @@ static int desc_list_init(void)
}
skb_reserve(new_skb, NET_IP_ALIGN);
/* Invidate the data cache of skb->data range when it is write back
- * cache. It will prevent overwritting the new data from DMA
+ * cache. It will prevent overwriting the new data from DMA
*/
blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
(unsigned long)new_skb->end);
@@ -1099,7 +1099,7 @@ static void bfin_mac_rx(struct net_device *dev)
/* reserve 2 bytes for RXDWA padding */
skb_reserve(new_skb, NET_IP_ALIGN);
/* Invidate the data cache of skb->data range when it is write back
- * cache. It will prevent overwritting the new data from DMA
+ * cache. It will prevent overwriting the new data from DMA
*/
blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
(unsigned long)new_skb->end);
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index d584d32..2b1e87e 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -9441,7 +9441,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,

#endif

- /* Configure interupt mode: try to enable MSI-X/MSI if
+ /* Configure interrupt mode: try to enable MSI-X/MSI if
* needed, set bp->num_queues appropriately.
*/
bnx2x_set_int_mode(bp);
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 5c6fba8..fc5cdea 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -639,7 +639,7 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
if (assigned_slave) {
client_info->ip_src = arp->ip_src;
client_info->ip_dst = arp->ip_dst;
- /* arp->mac_dst is broadcast for arp reqeusts.
+ /* arp->mac_dst is broadcast for arp requests.
* will be updated with clients actual unicast mac address
* upon receiving an arp reply.
*/
diff --git a/drivers/net/caif/caif_shmcore.c b/drivers/net/caif/caif_shmcore.c
index 8051116..731aa11 100644
--- a/drivers/net/caif/caif_shmcore.c
+++ b/drivers/net/caif/caif_shmcore.c
@@ -591,7 +591,7 @@ int caif_shmcore_probe(struct shmdev_layer *pshm_dev)
(NR_TX_BUF * TX_BUF_SZ + NR_RX_BUF * RX_BUF_SZ)) {

pr_warn("ERROR, Amount of available"
- " Phys. SHM cannot accomodate current SHM "
+ " Phys. SHM cannot accommodate current SHM "
"driver configuration, Bailing out ...\n");
free_netdev(pshm_dev->pshm_netdev);
return -ENOMEM;
diff --git a/drivers/net/caif/caif_spi_slave.c b/drivers/net/caif/caif_spi_slave.c
index 1b9943a..9fee8e3 100644
--- a/drivers/net/caif/caif_spi_slave.c
+++ b/drivers/net/caif/caif_spi_slave.c
@@ -158,7 +158,7 @@ void cfspi_xfer(struct work_struct *work)

cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_ACTIVE);

- /* Signal that we are ready to recieve data. */
+ /* Signal that we are ready to receive data. */
cfspi->dev->sig_xfer(true, cfspi->dev);

cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_XFER_DONE);
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 366f5cc..f1942ca 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -273,7 +273,7 @@ static inline void ican3_set_page(struct ican3_dev *mod, unsigned int page)
*/

/*
- * Recieve a message from the ICAN3 "old-style" firmware interface
+ * Receive a message from the ICAN3 "old-style" firmware interface
*
* LOCKING: must hold mod->lock
*
@@ -1049,7 +1049,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
complete(&mod->termination_comp);
break;
default:
- dev_err(mod->dev, "recieved an unknown inquiry response\n");
+ dev_err(mod->dev, "received an unknown inquiry response\n");
break;
}
}
@@ -1057,7 +1057,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
static void ican3_handle_unknown_message(struct ican3_dev *mod,
struct ican3_msg *msg)
{
- dev_warn(mod->dev, "recieved unknown message: spec 0x%.2x length %d\n",
+ dev_warn(mod->dev, "received unknown message: spec 0x%.2x length %d\n",
msg->spec, le16_to_cpu(msg->len));
}

@@ -1112,7 +1112,7 @@ static bool ican3_txok(struct ican3_dev *mod)
}

/*
- * Recieve one CAN frame from the hardware
+ * Receive one CAN frame from the hardware
*
* CONTEXT: must be called from user context
*/
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 0a8de01..a358ea9 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -425,7 +425,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
cf->data[3] = ecc & ECC_SEG;
break;
}
- /* Error occured during transmission? */
+ /* Error occurred during transmission? */
if ((ecc & ECC_DIR) == 0)
cf->data[2] |= CAN_ERR_PROT_TX;
}
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index e75f1a8..a72c7bf 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -386,7 +386,7 @@ static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
break;
}

- /* Error occured during transmission? */
+ /* Error occurred during transmission? */
if ((ecc & SJA1000_ECC_DIR) == 0)
cf->data[2] |= CAN_ERR_PROT_TX;

diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c
index 05a5275..b7f155f 100644
--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -284,7 +284,7 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
break;
}

- /* Error occured during transmission? */
+ /* Error occurred during transmission? */
if (!(ecc & SJA1000_ECC_DIR))
cf->data[2] |= CAN_ERR_PROT_TX;

diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 3437613..15ba5b9 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -5165,7 +5165,7 @@ err_out_free_res:
pci_release_regions(pdev);

err_write_cacheline:
- /* Try to restore it in case the error occured after we
+ /* Try to restore it in case the error occurred after we
* set it.
*/
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, orig_cacheline_size);
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index d55db6b..626ad4c 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1386,11 +1386,11 @@ struct intr_info {
* @reg: the interrupt status register to process
* @mask: a mask to apply to the interrupt status
* @acts: table of interrupt actions
- * @stats: statistics counters tracking interrupt occurences
+ * @stats: statistics counters tracking interrupt occurrences
*
* A table driven interrupt handler that applies a set of masks to an
* interrupt status word and performs the corresponding actions if the
- * interrupts described by the mask have occured. The actions include
+ * interrupts described by the mask have occurred. The actions include
* optionally printing a warning or alert message, and optionally
* incrementing a stat counter. The table is terminated by an entry
* specifying mask 0. Returns the number of fatal interrupt conditions.
@@ -2783,7 +2783,7 @@ static void init_mtus(unsigned short mtus[])
{
/*
* See draft-mathis-plpmtud-00.txt for the values. The min is 88 so
- * it can accomodate max size TCP/IP headers when SACK and timestamps
+ * it can accommodate max size TCP/IP headers when SACK and timestamps
* are enabled and still have at least 8 bytes of payload.
*/
mtus[0] = 88;
diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/cxgb4/t4_hw.c
index b9fd8a6..d1ec111 100644
--- a/drivers/net/cxgb4/t4_hw.c
+++ b/drivers/net/cxgb4/t4_hw.c
@@ -883,7 +883,7 @@ struct intr_info {
*
* A table driven interrupt handler that applies a set of masks to an
* interrupt status word and performs the corresponding actions if the
- * interrupts described by the mask have occured. The actions include
+ * interrupts described by the mask have occurred. The actions include
* optionally emitting a warning or alert message. The table is terminated
* by an entry specifying mask 0. Returns the number of fatal interrupt
* conditions.
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 2a628d1..ee8ec73 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -1013,7 +1013,7 @@ static void emac_rx_handler(void *token, int len, int status)
return;
}

- /* recycle on recieve error */
+ /* recycle on receive error */
if (status < 0) {
ndev->stats.rx_errors++;
goto recycle;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 3065870..c605a98 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4853,7 +4853,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
if (skb->protocol == htons(ETH_P_IP))
tx_flags |= E1000_TX_FLAGS_IPV4;

- /* if count is 0 then mapping error has occured */
+ /* if count is 0 then mapping error has occurred */
count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
if (count) {
e1000_tx_queue(adapter, tx_flags, count);
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index ace318d..3802949 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -97,7 +97,7 @@ struct bufdesc {
* The following definitions courtesy of commproc.h, which where
* Copyright (c) 1997 Dan Malek (dmalek@xxxxxxx).
*/
-#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
+#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ibm_newemac/tah.c
index 299aa49..02b1d7c 100644
--- a/drivers/net/ibm_newemac/tah.c
+++ b/drivers/net/ibm_newemac/tah.c
@@ -60,7 +60,7 @@ void tah_reset(struct platform_device *ofdev)
printk(KERN_ERR "%s: reset timeout\n",
ofdev->dev.of_node->full_name);

- /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
+ /* 10KB TAH TX FIFO accommodates the max MTU of 9000 */
out_be32(&p->mr,
TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
TAH_MR_DIG);
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index 6694bf3..d639706 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -1421,7 +1421,7 @@ out:
}

/**
- * igb_check_downshift - Checks whether a downshift in speed occured
+ * igb_check_downshift - Checks whether a downshift in speed occurred
* @hw: pointer to the HW structure
*
* Success returns 0, Failure returns 1
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 58c665b..25bcba4 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -4198,7 +4198,7 @@ netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,

/*
* count reflects descriptors mapped, if 0 or less then mapping error
- * has occured and we need to rewind the descriptor queue
+ * has occurred and we need to rewind the descriptor queue
*/
count = igb_tx_map_adv(tx_ring, skb, first);
if (!count) {
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 6352c81..219a2db 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -2287,7 +2287,7 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb,

/*
* count reflects descriptors mapped, if 0 then mapping error
- * has occured and we need to rewind the descriptor queue
+ * has occurred and we need to rewind the descriptor queue
*/
count = igbvf_tx_map_adv(adapter, tx_ring, skb, first);

diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index aa93655..650e843 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -493,7 +493,7 @@ static int ipg_config_autoneg(struct net_device *dev)
txflowcontrol = 0;
rxflowcontrol = 0;

- /* To accomodate a problem in 10Mbps operation,
+ /* To accommodate a problem in 10Mbps operation,
* set a global flag if PHY running in 10Mbps mode.
*/
sp->tenmbpsmode = 0;
@@ -1141,13 +1141,13 @@ static int ipg_nic_rx_check_error(struct net_device *dev)

/* Increment detailed receive error statistics. */
if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
- IPG_DEBUG_MSG("RX FIFO overrun occured.\n");
+ IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");

sp->stats.rx_fifo_errors++;
}

if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
- IPG_DEBUG_MSG("RX runt occured.\n");
+ IPG_DEBUG_MSG("RX runt occurred.\n");
sp->stats.rx_length_errors++;
}

@@ -1156,7 +1156,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
*/

if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
- IPG_DEBUG_MSG("RX alignment error occured.\n");
+ IPG_DEBUG_MSG("RX alignment error occurred.\n");
sp->stats.rx_frame_errors++;
}

@@ -1421,12 +1421,12 @@ static int ipg_nic_rx(struct net_device *dev)

/* Increment detailed receive error statistics. */
if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
- IPG_DEBUG_MSG("RX FIFO overrun occured.\n");
+ IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");
sp->stats.rx_fifo_errors++;
}

if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
- IPG_DEBUG_MSG("RX runt occured.\n");
+ IPG_DEBUG_MSG("RX runt occurred.\n");
sp->stats.rx_length_errors++;
}

@@ -1436,7 +1436,7 @@ static int ipg_nic_rx(struct net_device *dev)
*/

if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
- IPG_DEBUG_MSG("RX alignment error occured.\n");
+ IPG_DEBUG_MSG("RX alignment error occurred.\n");
sp->stats.rx_frame_errors++;
}

@@ -1460,7 +1460,7 @@ static int ipg_nic_rx(struct net_device *dev)
}
} else {

- /* Adjust the new buffer length to accomodate the size
+ /* Adjust the new buffer length to accommodate the size
* of the received frame.
*/
skb_put(skb, framelen);
@@ -1886,7 +1886,7 @@ static netdev_tx_t ipg_nic_hard_start_xmit(struct sk_buff *skb,
/* Request TxComplete interrupts at an interval defined
* by the constant IPG_FRAMESBETWEENTXCOMPLETES.
* Request TxComplete interrupt for every frame
- * if in 10Mbps mode to accomodate problem with 10Mbps
+ * if in 10Mbps mode to accommodate problem with 10Mbps
* processing.
*/
if (sp->tenmbpsmode)
@@ -2100,7 +2100,7 @@ static int ipg_nic_change_mtu(struct net_device *dev, int new_mtu)
struct ipg_nic_private *sp = netdev_priv(dev);
int err;

- /* Function to accomodate changes to Maximum Transfer Unit
+ /* Function to accommodate changes to Maximum Transfer Unit
* (or MTU) of IPG NIC. Cannot use default function since
* the default will not allow for MTU > 1500 bytes.
*/
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index f81d944..174cafa 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -56,7 +56,7 @@
/* do_probe module parameter Enable this code */
/* Probe code is very useful for understanding how the hardware works */
/* Use it with various combinations of TT_LEN, RX_LEN */
-/* Strongly recomended, disable if the probe fails on your machine */
+/* Strongly recommended, disable if the probe fails on your machine */
/* and send me <james@xxxxxxxxxxxxxxxx> the output of dmesg */
#define USE_PROBE 1
#undef USE_PROBE
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index cc821de..a5810d6 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)

mcs_get_reg(mcs, MCS_MODE_REG, &rval);

- /* MINRXPW values recomended by MosChip */
+ /* MINRXPW values recommended by MosChip */
if (mcs->new_speed <= 115200) {
rval &= ~MCS_FIR;

diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index c192c31..001ed0a 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -40,7 +40,7 @@

#define ICCR0_AME (1 << 7) /* Address match enable */
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
-#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
+#define ICCR0_RIE (1 << 5) /* Receive FIFO interrupt enable */
#define ICCR0_RXE (1 << 4) /* Receive enable */
#define ICCR0_TXE (1 << 3) /* Transmit enable */
#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
@@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id)
}

if (icsr0 & ICSR0_EIF) {
- /* An error in FIFO occured, or there is a end of frame */
+ /* An error in FIFO occurred, or there is a end of frame */
pxa_irda_fir_irq_eif(si, dev, icsr0);
}

diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 67c0ad4..272b7f5 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -246,7 +246,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
FirIRQ = bTmp1 & 0x0f;

pci_read_config_byte(pcidev,0x69,&bTmp);
- FirIOBase = bTmp << 8;//hight byte
+ FirIOBase = bTmp << 8;//high byte
pci_read_config_byte(pcidev,0x68,&bTmp);
FirIOBase = (FirIOBase | bTmp ) & 0xfff0;
//-------------------------
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 8f7123e..99024ca 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -1430,7 +1430,7 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
}

/**
- * ixgbe_tn_check_overtemp - Checks if an overtemp occured.
+ * ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
* @hw: pointer to hardware structure
*
* Checks if the LASI temp alarm status was triggered due to overtemp
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index 056152b..5847097 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -111,7 +111,7 @@ static const char main_strings[][ETH_GSTRING_LEN] = {
#define NUM_ALL_STATS (NUM_MAIN_STATS + NUM_PORT_STATS + NUM_PKT_STATS + NUM_PERF_STATS)

static const char mlx4_en_test_names[][ETH_GSTRING_LEN]= {
- "Interupt Test",
+ "Interrupt Test",
"Link Test",
"Speed Test",
"Register Test",
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 570f250..44f84e6 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -706,8 +706,8 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget)
}

-/* Calculate the last offset position that accomodates a full fragment
- * (assuming fagment size = stride-align) */
+/* Calculate the last offset position that accommodates a full fragment
+ * (assuming fragment size = stride-align) */
static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16 align)
{
u16 res = MLX4_EN_ALLOC_SIZE % stride;
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 2fd3963..ae8067d 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -203,7 +203,7 @@ skbuff at an offset of "+2", 16-byte aligning the IP header.
IIId. Synchronization

Most operations are synchronized on the np->lock irq spinlock, except the
-recieve and transmit paths which are synchronised using a combination of
+receive and transmit paths which are synchronised using a combination of
hardware descriptor ownership, disabling interrupts and NAPI poll scheduling.

IVb. References
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index a1b82c9..3847fac 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -546,7 +546,7 @@ ppp_async_encode(struct asyncppp *ap)
proto = get_unaligned_be16(data);

/*
- * LCP packets with code values between 1 (configure-reqest)
+ * LCP packets with code values between 1 (configure-request)
* and 7 (code-reject) must be sent as though no options
* had been negotiated.
*/
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c
index 1b63c8a..c97be3d 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/pxa168_eth.c
@@ -1235,7 +1235,7 @@ static int pxa168_rx_poll(struct napi_struct *napi, int budget)
handle_link_event(pep);
}
/*
- * We call txq_reclaim every time since in NAPI interupts are disabled
+ * We call txq_reclaim every time since in NAPI interrupts are disabled
* and due to this we miss the TX_DONE interrupt,which is not updated in
* interrupt status register.
*/
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 39c17ce..5591ce7 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3563,7 +3563,7 @@ static void s2io_reset(struct s2io_nic *sp)
}

/*
- * Clear spurious ECC interrupts that would have occured on
+ * Clear spurious ECC interrupts that would have occurred on
* XFRAME II cards after reset.
*/
if (sp->device_type == XFRAME_II_DEVICE) {
diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h
index 90359e6..4379ff2 100644
--- a/drivers/net/sfc/mcdi_pcol.h
+++ b/drivers/net/sfc/mcdi_pcol.h
@@ -48,8 +48,8 @@
* \------------------------------ Resync (always set)
*
* The client writes it's request into MC shared memory, and rings the
- * doorbell. Each request is completed by either by the MC writting
- * back into shared memory, or by writting out an event.
+ * doorbell. Each request is completed by either by the MC writing
+ * back into shared memory, or by writing out an event.
*
* All MCDI commands support completion by shared memory response. Each
* request may also contain additional data (accounted for by HEADER.LEN),
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 3406ed8..b436e00 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -93,7 +93,7 @@ enum sis190_registers {
IntrStatus = 0x20,
IntrMask = 0x24,
IntrControl = 0x28,
- IntrTimer = 0x2c, // unused (Interupt Timer)
+ IntrTimer = 0x2c, // unused (Interrupt Timer)
PMControl = 0x30, // unused (Power Mgmt Control/Status)
rsv2 = 0x34, // reserved
ROMControl = 0x38,
@@ -234,7 +234,7 @@ enum _DescStatusBit {
RxSizeMask = 0x0000ffff
/*
* The asic could apparently do vlan, TSO, jumbo (sis191 only) and
- * provide two (unused with Linux) Tx queues. No publically
+ * provide two (unused with Linux) Tx queues. No publicly
* available documentation alas.
*/
};
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 640e368..b7adfbb 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1650,7 +1650,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
status = inl(ioaddr + isr);

if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
- /* nothing intresting happened */
+ /* nothing interesting happened */
break;
handled = 1;

@@ -1723,7 +1723,7 @@ static int sis900_rx(struct net_device *net_dev)
rx_size = data_size - CRC_SIZE;

#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
- /* ``TOOLONG'' flag means jumbo packet recived. */
+ /* ``TOOLONG'' flag means jumbo packet received. */
if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE)
rx_status &= (~ ((unsigned int)TOOLONG));
#endif
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 507addc..51c0214 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1038,7 +1038,7 @@ enum {

PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */
PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */
- PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */
+ PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occurred */
PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */
PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */
PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */
@@ -1721,8 +1721,8 @@ enum {
GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */
GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */
GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */
- GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */
- GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */
+ GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occurred */
+ GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occurred */

GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */
GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */
@@ -2227,7 +2227,7 @@ enum {
XM_ST_BC = 1<<7, /* Bit 7: Broadcast packet */
XM_ST_MC = 1<<6, /* Bit 6: Multicast packet */
XM_ST_UC = 1<<5, /* Bit 5: Unicast packet */
- XM_ST_TX_UR = 1<<4, /* Bit 4: FIFO Underrun occured */
+ XM_ST_TX_UR = 1<<4, /* Bit 4: FIFO Underrun occurred */
XM_ST_CS_ERR = 1<<3, /* Bit 3: Carrier Sense Error */
XM_ST_LAT_COL = 1<<2, /* Bit 2: Late Collision Error */
XM_ST_MUL_COL = 1<<1, /* Bit 1: Multiple Collisions */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7d85a38..ec77231 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1972,7 +1972,7 @@ static void sky2_hw_down(struct sky2_port *sky2)

sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);

- /* Force any delayed status interrrupt and NAPI */
+ /* Force any delayed status interrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 6861b0e..0c6d10c 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1194,7 +1194,7 @@ enum {

PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */
PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */
- PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */
+ PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occurred */
PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */
PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */
PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */
@@ -1725,8 +1725,8 @@ enum {
GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */
GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */
GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */
- GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */
- GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */
+ GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occurred */
+ GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occurred */

GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */
GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index ee74791..d2593ab 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -983,7 +983,7 @@ static const char * chip_ids[ 16 ] = {
* Hack Alert: Some setups just can't write 8 or 16 bits reliably when not
* aligned to a 32 bit boundary. I tell you that does exist!
* Fortunately the affected register accesses can be easily worked around
- * since we can write zeroes to the preceeding 16 bits without adverse
+ * since we can write zeroes to the preceding 16 bits without adverse
* effects and use a 32-bit access.
*
* Enforce it on any 32-bit capable setup for now.
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 64bfdae..d3150d9 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1664,7 +1664,7 @@ static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op)
}

if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
- SMSC_TRACE(DRV, "Error occured during eeprom operation");
+ SMSC_TRACE(DRV, "Error occurred during eeprom operation");
return -EINVAL;
}

diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index b09ee1c..4c92ad8 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -364,7 +364,7 @@ static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op)
}

if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
- smsc_info(HW, "Error occured during eeprom operation");
+ smsc_info(HW, "Error occurred during eeprom operation");
return -EINVAL;
}

diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index b6eec8c..3066df8 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -125,7 +125,7 @@ struct tc35815_regs {
#define DMA_RxAlign_2 0x00800000
#define DMA_RxAlign_3 0x00c00000
#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
-#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
+#define DMA_IntMask 0x00040000 /* 1:Interrupt mask */
#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
@@ -157,7 +157,7 @@ struct tc35815_regs {
#define PROM_Read 0x00004000 /*10:Read operation */
#define PROM_Write 0x00002000 /*01:Write operation */
#define PROM_Erase 0x00006000 /*11:Erase operation */
- /*00:Enable or Disable Writting, */
+ /*00:Enable or Disable Writing, */
/* as specified in PROM_Addr. */
#define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */
/*00xxxx: disable */
@@ -310,7 +310,7 @@ struct BDesc {
#define FD_BDCnt_SHIFT 16

/* Buffer Descripter bit asign --------------------------------------------- */
-#define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */
+#define BD_BuffLength_MASK 0x0000FFFF /* Receive Data Size */
#define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */
#define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */
#define BD_CownsBD 0x80000000 /* BD Controller owner bit */
@@ -339,7 +339,7 @@ struct BDesc {
#define TX_THRESHOLD 1024
/* used threshold with packet max byte for low pci transfer ability.*/
#define TX_THRESHOLD_MAX 1536
-/* setting threshold max value when overrun error occured this count. */
+/* setting threshold max value when overrun error occurred this count. */
#define TX_THRESHOLD_KEEP_LIMIT 10

/* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 3397618..df6f1ce 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -275,7 +275,7 @@ static irqreturn_t bdx_isr_napi(int irq, void *dev)
* currently intrs are disabled (since we read ISR),
* and we have failed to register next poll.
* so we read the regs to trigger chip
- * and allow further interupts. */
+ * and allow further interrupts. */
READ_REG(priv, regTXF_WPTR_0);
READ_REG(priv, regRXD_WPTR_0);
}
@@ -1200,7 +1200,7 @@ static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd)
RET();
}

-/* bdx_rx_receive - recieves full packets from RXD fifo and pass them to OS
+/* bdx_rx_receive - receives full packets from RXD fifo and pass them to OS
* NOTE: a special treatment is given to non-continous descriptors
* that start near the end, wraps around and continue at the beginning. a second
* part is copied right after the first, and then descriptor is interpreted as
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 3d2fbe6..83ba265 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -12,7 +12,7 @@
* Director, National Security Agency.
*
* Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their
- * assistance and perserverance with the testing of this driver.
+ * assistance and perseverance with the testing of this driver.
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
diff --git a/drivers/net/tsi108_eth.h b/drivers/net/tsi108_eth.h
index 5a77ae6..5fee7d7 100644
--- a/drivers/net/tsi108_eth.h
+++ b/drivers/net/tsi108_eth.h
@@ -305,9 +305,9 @@
#define TSI108_TX_CRC (1 << 5) /* Generate CRC for this packet */
#define TSI108_TX_INT (1 << 14) /* Generate an IRQ after frag. processed */
#define TSI108_TX_RETRY (0xf << 16) /* 4 bit field indicating num. of retries */
-#define TSI108_TX_COL (1 << 20) /* Set if a collision occured */
-#define TSI108_TX_LCOL (1 << 24) /* Set if a late collision occured */
-#define TSI108_TX_UNDER (1 << 25) /* Set if a FIFO underrun occured */
+#define TSI108_TX_COL (1 << 20) /* Set if a collision occurred */
+#define TSI108_TX_LCOL (1 << 24) /* Set if a late collision occurred */
+#define TSI108_TX_UNDER (1 << 25) /* Set if a FIFO underrun occurred */
#define TSI108_TX_RLIM (1 << 26) /* Set if the retry limit was reached */
#define TSI108_TX_OK (1 << 30) /* Set if the frame TX was successful */
#define TSI108_TX_OWN (1 << 31) /* Set if the device owns the descriptor */
@@ -332,7 +332,7 @@ typedef struct {
#define TSI108_RX_RUNT (1 << 4)/* Packet is less than minimum size */
#define TSI108_RX_HASH (1 << 7)/* Hash table match */
#define TSI108_RX_BAD (1 << 8) /* Bad frame */
-#define TSI108_RX_OVER (1 << 9) /* FIFO overrun occured */
+#define TSI108_RX_OVER (1 << 9) /* FIFO overrun occurred */
#define TSI108_RX_TRUNC (1 << 11) /* Packet truncated due to excess length */
#define TSI108_RX_CRC (1 << 12) /* Packet had a CRC error */
#define TSI108_RX_INT (1 << 13) /* Generate an IRQ after frag. processed */
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index dd8a4ad..b3e44aa 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -325,7 +325,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
* For RX we handle drivers that zero-pad to end-of-packet.
* Don't let userspace change these settings.
*
- * NOTE: there still seems to be wierdness here, as if we need
+ * NOTE: there still seems to be weirdness here, as if we need
* to do some more things to make sure WinCE targets accept this.
* They default to jumbograms of 8KB or 16KB, which is absurd
* for such low data rates and which is also more than Linux
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 5e7f069..eb5d75d 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1861,7 +1861,7 @@ static void rhine_restart_tx(struct net_device *dev) {
u32 intr_status;

/*
- * If new errors occured, we need to sort them out before doing Tx.
+ * If new errors occurred, we need to sort them out before doing Tx.
* In that case the ISR will be back here RSN anyway.
*/
intr_status = get_intr_status(dev);
@@ -1887,7 +1887,7 @@ static void rhine_restart_tx(struct net_device *dev) {
/* This should never happen */
if (debug > 1)
printk(KERN_WARNING "%s: rhine_restart_tx() "
- "Another error occured %8.8x.\n",
+ "Another error occurred %8.8x.\n",
dev->name, intr_status);
}

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 09cac70..8145f32 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -292,7 +292,7 @@ VELOCITY_PARAM(DMA_length, "DMA length");
/* IP_byte_align[] is used for IP header DWORD byte aligned
0: indicate the IP header won't be DWORD byte aligned.(Default) .
1: indicate the IP header will be DWORD byte aligned.
- In some enviroment, the IP header should be DWORD byte aligned,
+ In some environment, the IP header should be DWORD byte aligned,
or the packet will be droped when we receive it. (eg: IPVS)
*/
VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index cc14b4a..ffcca1d 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -892,7 +892,7 @@ vmxnet3_prepare_tso(struct sk_buff *skb,
* Transmits a pkt thru a given tq
* Returns:
* NETDEV_TX_OK: descriptors are setup successfully
- * NETDEV_TX_OK: error occured, the pkt is dropped
+ * NETDEV_TX_OK: error occurred, the pkt is dropped
* NETDEV_TX_BUSY: tx ring is full, queue is stopped
*
* Side-effects:
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/vxge/vxge-config.h
index e249e28..16b9cf8 100644
--- a/drivers/net/vxge/vxge-config.h
+++ b/drivers/net/vxge/vxge-config.h
@@ -1133,7 +1133,7 @@ struct __vxge_hw_non_offload_db_wrapper {
* override the selection of the physical transmit port.
* Attention:
* Normal sounds as if learned from the switch rather than from
- * the aggregation algorythms.
+ * the aggregation algorithms.
* 00: Normal. Use Destination/MAC Address
* lookup to determine the transmit port.
* 01: Send on physical Port1.
diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h
index 65d0197..0398500 100644
--- a/drivers/net/wan/lmc/lmc_var.h
+++ b/drivers/net/wan/lmc/lmc_var.h
@@ -380,7 +380,7 @@ struct lmc___softc {
/* CSR6 settings */
#define OPERATION_MODE 0x00000200 /* Full Duplex */
#define PROMISC_MODE 0x00000040 /* Promiscuous Mode */
-#define RECIEVE_ALL 0x40000000 /* Recieve All */
+#define RECIEVE_ALL 0x40000000 /* Receive All */
#define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames */

/* Dec control registers CSR6 as well */
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 65bc334..f510ec7 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -755,7 +755,7 @@ EXPORT_SYMBOL_GPL(i2400m_error_recovery);
* Alloc the command and ack buffers for boot mode
*
* Get the buffers needed to deal with boot mode messages. These
- * buffers need to be allocated before the sdio recieve irq is setup.
+ * buffers need to be allocated before the sdio receive irq is setup.
*/
static
int i2400m_bm_buf_alloc(struct i2400m *i2400m)
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index eb80243..4a4f916 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -112,7 +112,7 @@ static inline void edc_init(struct edc *edc)
*
* This is way to determine if the number of acceptable errors per time
* period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurences
+ * this scheme will not work, for example if there are periodic occurrences
* of errors that straddle updates to the start time. This scheme is
* sufficient for our usage.
*
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 844133b..2f94a87 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -349,7 +349,7 @@ error_no_waiter:
*
* For reports: We can't clone the original skb where the data is
* because we need to send this up via netlink; netlink has to add
- * headers and we can't overwrite what's preceeding the payload...as
+ * headers and we can't overwrite what's preceding the payload...as
* it is another message. So we just dup them.
*/
static
@@ -425,7 +425,7 @@ error_check:
*
* As in i2400m_rx_ctl(), we can't clone the original skb where the
* data is because we need to send this up via netlink; netlink has to
- * add headers and we can't overwrite what's preceeding the
+ * add headers and we can't overwrite what's preceding the
* payload...as it is another message. So we just dup them.
*/
static
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index fd14b91..fa5c3bb 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -283,7 +283,7 @@
*/
#define AR5K_ISR 0x001c /* Register Address [5210] */
#define AR5K_PISR 0x0080 /* Register Address [5211+] */
-#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */
+#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */
#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */
#define AR5K_ISR_RXERR 0x00000004 /* Receive error */
#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */
@@ -377,7 +377,7 @@
*/
#define AR5K_IMR 0x0020 /* Register Address [5210] */
#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */
-#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/
+#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/
#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/
#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/
#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 2b14775..8e981a0 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -261,7 +261,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
}

/*
- * If a country IE has been recieved check its rule for this
+ * If a country IE has been received check its rule for this
* channel first before enabling active scan. The passive scan
* would have been enforced by the initial processing of our
* custom regulatory domain.
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index bd4cb75..ebc93c1 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,8 +648,8 @@ struct b43_request_fw_context {
char errors[B43_NR_FWTYPES][128];
/* Temporary buffer for storing the firmware name. */
char fwname[64];
- /* A fatal error occured while requesting. Firmware reqest
- * can not continue, as any other reqest will also fail. */
+ /* A fatal error occurred while requesting. Firmware request
+ * can not continue, as any other request will also fail. */
int fatal_failure;
};

diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index ae438ed..3991b9d 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -8367,7 +8367,7 @@ static void ipw_handle_mgmt_packet(struct ipw_priv *priv,
/*
* Main entry function for recieving a packet with 80211 headers. This
* should be called when ever the FW has notified us that there is a new
- * skb in the recieve queue.
+ * skb in the receive queue.
*/
static void ipw_rx(struct ipw_priv *priv)
{
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 698a1f7..d27230d 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -123,7 +123,7 @@ static u8 lbs_auth_to_authtype(enum nl80211_auth_type auth_type)

/* Various firmware commands need the list of supported rates, but with
- the hight-bit set for basic rates */
+ the high-bit set for basic rates */
static int lbs_add_rates(u8 *rates)
{
size_t i;
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h
index 8b1417d..d2ac1dc 100644
--- a/drivers/net/wireless/libertas/if_spi.h
+++ b/drivers/net/wireless/libertas/if_spi.h
@@ -66,7 +66,7 @@
#define IF_SPI_HOST_INT_CTRL_REG 0x40 /* Host interrupt controller reg */

#define IF_SPI_CARD_INT_CAUSE_REG 0x44 /* Card interrupt cause reg */
-#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interupt status reg */
+#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interrupt status reg */
#define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */
#define IF_SPI_CARD_INT_STATUS_MASK_REG 0x50 /* Card interrupt status mask */

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 4c55e85..42d768e 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -594,7 +594,7 @@
* READ_CONTROL: 0 write BBP, 1 read BBP
* BUSY: ASIC is busy executing BBP commands
* BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
- * BBP_RW_MODE: 0 serial, 1 paralell
+ * BBP_RW_MODE: 0 serial, 1 parallel
*/
#define BBP_CSR_CFG 0x101c
#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff)
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index bfda60e..4c0fc1f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -283,7 +283,7 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev)
/**
* While scanning, link tuning is disabled. By default
* the most sensitive settings will be used to make sure
- * that all beacons and probe responses will be recieved
+ * that all beacons and probe responses will be received
* during the scan.
*/
if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index fab8e26..a8e05b3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -337,7 +337,7 @@ struct txentry_desc {
* only be touched after the device has signaled it is done with it.
* @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting
* for the signal to start sending.
- * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured
+ * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occurred
* while transfering the data to the hardware. No TX status report will
* be expected from the hardware.
* @ENTRY_DATA_STATUS_PENDING: The entry has been send to the device and
@@ -358,7 +358,7 @@ enum queue_entry_flags {
* @flags: Entry flags, see &enum queue_entry_flags.
* @queue: The data queue (&struct data_queue) to which this entry belongs.
* @skb: The buffer which is currently being transmitted (for TX queue),
- * or used to directly recieve data in (for RX queue).
+ * or used to directly receive data in (for RX queue).
* @entry_idx: The entry index number.
* @priv_data: Private data belonging to this queue entry. The pointer
* points to data specific to a particular driver and queue type.
@@ -620,7 +620,7 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
}

/**
- * rt2x00queue_status_timeout - Check if a timeout occured for STATUS reports
+ * rt2x00queue_status_timeout - Check if a timeout occurred for STATUS reports
* @queue: Queue to check.
*/
static inline int rt2x00queue_status_timeout(struct data_queue *queue)
@@ -630,7 +630,7 @@ static inline int rt2x00queue_status_timeout(struct data_queue *queue)
}

/**
- * rt2x00queue_timeout - Check if a timeout occured for DMA transfers
+ * rt2x00queue_timeout - Check if a timeout occurred for DMA transfers
* @queue: Queue to check.
*/
static inline int rt2x00queue_dma_timeout(struct data_queue *queue)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 1a9937d..5f79f72 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -420,7 +420,7 @@ void rt2x00usb_flush_queue(struct data_queue *queue)
/*
* Check if the driver is already done, otherwise we
* have to sleep a little while to give the driver/hw
- * the oppurtunity to complete interrupt process itself.
+ * the opportunity to complete interrupt process itself.
*/
if (rt2x00queue_empty(queue))
break;
@@ -433,7 +433,7 @@ void rt2x00usb_flush_queue(struct data_queue *queue)

/*
* Wait for a little while to give the driver
- * the oppurtunity to recover itself.
+ * the opportunity to recover itself.
*/
msleep(10);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 6aaf51f..e11c759 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -400,7 +400,7 @@ void rt2x00usb_flush_queue(struct data_queue *queue);
* @rt2x00dev: Pointer to &struct rt2x00_dev
*
* Check the health of the USB communication and determine
- * if timeouts have occured. If this is the case, this function
+ * if timeouts have occurred. If this is the case, this function
* will reset all communication to restore functionality again.
*/
void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rtlwifi/debug.h b/drivers/net/wireless/rtlwifi/debug.h
index 08bdec2..116a946 100644
--- a/drivers/net/wireless/rtlwifi/debug.h
+++ b/drivers/net/wireless/rtlwifi/debug.h
@@ -45,7 +45,7 @@
/*
*Abnormal, rare, or unexpeted cases.
*For example, Packet/IO Ctl canceled,
- *device suprisely unremoved and so on.
+ *device surprisely unremoved and so on.
*/
#define DBG_WARNING 2

diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 1758d44..1473476 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1506,7 +1506,7 @@ void rtl_pci_stop(struct ieee80211_hw *hw)
u8 RFInProgressTimeOut = 0;

/*
- *should before disable interrrupt&adapter
+ *should before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c
index 3336ca9..d26f957 100644
--- a/drivers/net/wireless/rtlwifi/regd.c
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -179,7 +179,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
}

/*
- *If a country IE has been recieved check its rule for this
+ *If a country IE has been received check its rule for this
*channel first before enabling active scan. The passive scan
*would have been enforced by the initial processing of our
*custom regulatory domain.
diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h
index 844b32b..6ffe027 100644
--- a/drivers/net/wireless/wl12xx/io.h
+++ b/drivers/net/wireless/wl12xx/io.h
@@ -94,7 +94,7 @@ static inline int wl1271_translate_addr(struct wl1271 *wl, int addr)
* translated region.
*
* The translated regions occur next to each other in physical device
- * memory, so just add the sizes of the preceeding address regions to
+ * memory, so just add the sizes of the preceding address regions to
* get the offset to the new region.
*
* Currently, only the two first regions are addressed, and the
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
index 9e74eb1..ba0a0cc 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
@@ -353,7 +353,7 @@ static int uw2453_init_hw(struct zd_rf *rf)
};

static const u32 rv[] = {
- UW2453_REGWRITE(4, 0x2b), /* configure reciever gain */
+ UW2453_REGWRITE(4, 0x2b), /* configure receiver gain */
UW2453_REGWRITE(5, 0x19e4f), /* configure transmitter gain */
UW2453_REGWRITE(6, 0xf81ad), /* enable RX/TX filter tuning */
UW2453_REGWRITE(7, 0x3fffe), /* disable TX gain in test mode */
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 1062b8f..a73ac67 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -213,7 +213,7 @@ pdcspath_store(struct pdcspath_entry *entry)

/* addr, devpath and count must be word aligned */
if (pdc_stable_write(entry->addr, devpath, sizeof(*devpath)) != PDC_OK) {
- printk(KERN_ERR "%s: an error occured when writing to PDC.\n"
+ printk(KERN_ERR "%s: an error occurred when writing to PDC.\n"
"It is likely that the Stable Storage data has been corrupted.\n"
"Please check it carefully upon next reboot.\n", __func__);
WARN_ON(1);
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 8d62fb7..1664dd8 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1178,7 +1178,7 @@ out_no_data:
* ******************************************
*/

-/* GCC is not inlining extern inline function later overwriten to non-inline,
+/* GCC is not inlining extern inline function later overwritten to non-inline,
so we use outlined_ variants here. */
static const struct parport_operations parport_pc_ops = {
.write_data = parport_pc_write_data,
diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c
index 8591f6a..b859d16 100644
--- a/drivers/pnp/pnpbios/bioscalls.c
+++ b/drivers/pnp/pnpbios/bioscalls.c
@@ -219,7 +219,7 @@ void pnpbios_print_status(const char *module, u16 status)
module);
break;
case PNP_HARDWARE_ERROR:
- printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occured\n",
+ printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occurred\n",
module);
break;
default:
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 8000985..1e5c4c3 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -919,7 +919,7 @@ EXPORT_SYMBOL_GPL(ps3_disable_pm);
* @offset: Offset in bytes from the start of the trace buffer.
* @buf: Copy destination.
* @count: Maximum count of bytes to copy.
- * @bytes_copied: Pointer to a variable that will recieve the number of
+ * @bytes_copied: Pointer to a variable that will receive the number of
* bytes copied to @buf.
*
* On error @buf will contain any successfully copied trace buffer data
@@ -974,7 +974,7 @@ EXPORT_SYMBOL_GPL(ps3_lpm_copy_tb);
* @offset: Offset in bytes from the start of the trace buffer.
* @buf: A __user copy destination.
* @count: Maximum count of bytes to copy.
- * @bytes_copied: Pointer to a variable that will recieve the number of
+ * @bytes_copied: Pointer to a variable that will receive the number of
* bytes copied to @buf.
*
* On error @buf will contain any successfully copied trace buffer data
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index d37c445..1b98367 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -80,7 +80,7 @@ static void __maybe_unused _dump_sm_header(
*
* Currently all messages received from the system manager are either
* (16 bytes header + 8 bytes payload = 24 bytes) or (16 bytes header
- * + 16 bytes payload = 32 bytes). This knowlege is used to simplify
+ * + 16 bytes payload = 32 bytes). This knowledge is used to simplify
* the logic.
*/

diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a50391b..9aafcd9 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -295,7 +295,7 @@ static int __devinit rio_add_device(struct rio_dev *rdev)
}

/**
- * rio_enable_rx_tx_port - enable input reciever and output transmitter of
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
* given port
* @port: Master port associated with the RIO network
* @local: local=1 select local port otherwise a far device is reached
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index a0c0196..5d59c76 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -259,7 +259,7 @@ EXPORT_SYMBOL_GPL(rtc_update_irq_enable);
* @rtc: pointer to the rtc device
*
* This function is called when an AIE, UIE or PIE mode interrupt
- * has occured (or been emulated).
+ * has occurred (or been emulated).
*
* Triggers the registered irq_task function callback.
*/
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 88ea52b..819bba4 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -468,7 +468,7 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
* initialization is unknown and could in principle happen during
* normal processing.
*
- * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
+ * Notice that clearing bit 1 and 0 is accomplished by writing ONES to
* the corresponding bits in RTSR. */
RTSR = RTSR_AL | RTSR_HZ;

diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 1654a24..fb9e483 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -2207,7 +2207,7 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
* DASD_3990_ERP_CONTROL_CHECK
*
* DESCRIPTION
- * Does a generic inspection if a control check occured and sets up
+ * Does a generic inspection if a control check occurred and sets up
* the related error recovery procedure
*
* PARAMETER
@@ -2250,7 +2250,7 @@ dasd_3990_erp_inspect(struct dasd_ccw_req *erp)
struct dasd_ccw_req *erp_new = NULL;
char *sense;

- /* if this problem occured on an alias retry on base */
+ /* if this problem occurred on an alias retry on base */
erp_new = dasd_3990_erp_inspect_alias(erp);
if (erp_new)
return erp_new;
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 911822db..d6add2f 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -1013,7 +1013,7 @@ tty3270_convert_line(struct tty3270 *tp, int line_nr)
}
}
if (highlight != TAX_RESET)
- flen += 3; /* TO_SA to reset hightlight. */
+ flen += 3; /* TO_SA to reset highlight. */
if (f_color != TAC_RESET)
flen += 3; /* TO_SA to reset color. */
if (line->len < tp->view.cols)
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index a845695..ee2410d 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -318,7 +318,7 @@ ccw_device_sense_id_done(struct ccw_device *cdev, int err)

/**
* ccw_device_notify() - inform the device's driver about an event
- * @cdev: device for which an event occured
+ * @cdev: device for which an event occurred
* @event: event that occurred
*
* Returns:
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index ce3a5c1..92ed052 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -775,7 +775,7 @@ claw_irq_handler(struct ccw_device *cdev,
case CLAW_START_WRITE:
if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
dev_info(&cdev->dev,
- "%s: Unit Check Occured in "
+ "%s: Unit Check Occurred in "
"write channel\n", dev->name);
clear_bit(0, (void *)&p_ch->IO_active);
if (p_ch->irb->ecw[0] & 0x80) {
diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 8c921fc..2d60220 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -184,7 +184,7 @@ static void ctcmpc_chx_resend(fsm_instance *, int, void *);
static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg);

/**
- * Check return code of a preceeding ccw_device call, halt_IO etc...
+ * Check return code of a preceding ccw_device call, halt_IO etc...
*
* ch : The channel, the error belongs to.
* Returns the error code (!= 0) to inspect.
diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h
index 3343824..040f721 100644
--- a/drivers/scsi/3w-9xxx.h
+++ b/drivers/scsi/3w-9xxx.h
@@ -61,7 +61,7 @@ static twa_message_type twa_aen_table[] = {
{0x0000, "AEN queue empty"},
{0x0001, "Controller reset occurred"},
{0x0002, "Degraded unit detected"},
- {0x0003, "Controller error occured"},
+ {0x0003, "Controller error occurred"},
{0x0004, "Background rebuild failed"},
{0x0005, "Background rebuild done"},
{0x0006, "Incomplete unit detected"},
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 081c6de..bfd618a 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4544,7 +4544,7 @@ AscMemWordCopyPtrToLram(PortAddr iop_base, ushort s_addr,
* Copy 4 bytes to LRAM.
*
* The source data is assumed to be in little-endian order in memory
- * and is maintained in little-endian order when writen to LRAM.
+ * and is maintained in little-endian order when written to LRAM.
*/
static void
AscMemDWordCopyPtrToLram(PortAddr iop_base,
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 3233bf5..4ae5a9b 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -599,7 +599,7 @@ void
ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
{
/*
- * Write low byte first to accomodate registers
+ * Write low byte first to accommodate registers
* such as PRGMCNT where the order maters.
*/
ahd_outb(ahd, port, value & 0xFF);
@@ -5651,7 +5651,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)

/*
* Requeue all tagged commands for this target
- * currently in our posession so they can be
+ * currently in our possession so they can be
* converted to untagged commands.
*/
ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
@@ -6245,7 +6245,7 @@ ahd_shutdown(void *arg)
/*
* Reset the controller and record some information about it
* that is only available just after a reset. If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
* and the caller requests that the chip be fully reinitialized
* to a runable state. Chip interrupts are *not* enabled after
* a reinitialization. The caller must enable interrupts via
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 3f5a542..aef8111 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -4131,7 +4131,7 @@ ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)

/*
* Requeue all tagged commands for this target
- * currently in our posession so they can be
+ * currently in our possession so they can be
* converted to untagged commands.
*/
ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
@@ -4581,7 +4581,7 @@ ahc_shutdown(void *arg)
/*
* Reset the controller and record some information about it
* that is only available just after a reset. If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
* and the caller requests that the chip be fully reinitialized
* to a runable state. Chip interrupts are *not* enabled after
* a reinitialization. The caller must enable interrupts via
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 5218de4..fbd1dc2 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -877,7 +877,7 @@ struct be_all_if_id {
*/
#define CXN_KILLED_PDU_SIZE_EXCEEDS_DSL 3 /* Connection got invalidated
* internally
- * due to a recieved PDU
+ * due to a received PDU
* size > DSL
*/
#define CXN_KILLED_BURST_LEN_MISMATCH 4 /* Connection got invalidated
@@ -886,7 +886,7 @@ struct be_all_if_id {
* FBL/MBL.
*/
#define CXN_KILLED_AHS_RCVD 5 /* Connection got invalidated
- * internally due to a recieved
+ * internally due to a received
* PDU Hdr that has
* AHS */
#define CXN_KILLED_HDR_DIGEST_ERR 6 /* Connection got invalidated
@@ -899,12 +899,12 @@ struct be_all_if_id {
* pdu hdr
*/
#define CXN_KILLED_STALE_ITT_TTT_RCVD 8 /* Connection got invalidated
- * internally due to a recieved
+ * internally due to a received
* ITT/TTT that does not belong
* to this Connection
*/
#define CXN_KILLED_INVALID_ITT_TTT_RCVD 9 /* Connection got invalidated
- * internally due to recieved
+ * internally due to received
* ITT/TTT value > Max
* Supported ITTs/TTTs
*/
@@ -936,21 +936,21 @@ struct be_all_if_id {
* index.
*/
#define CXN_KILLED_OVER_RUN_RESIDUAL 16 /* Command got invalidated
- * internally due to recived
+ * internally due to received
* command has residual
* over run bytes.
*/
#define CXN_KILLED_UNDER_RUN_RESIDUAL 17 /* Command got invalidated
- * internally due to recived
+ * internally due to received
* command has residual under
* run bytes.
*/
#define CMD_KILLED_INVALID_STATSN_RCVD 18 /* Command got invalidated
- * internally due to a recieved
+ * internally due to a received
* PDU has an invalid StatusSN
*/
#define CMD_KILLED_INVALID_R2T_RCVD 19 /* Command got invalidated
- * internally due to a recieved
+ * internally due to a received
* an R2T with some invalid
* fields in it
*/
@@ -973,7 +973,7 @@ struct be_all_if_id {
*/
#define CMD_CXN_KILLED_INVALID_DATASN_RCVD 24 /* Command got invalidated
* internally due to a
- * recieved PDU has an invalid
+ * received PDU has an invalid
* DataSN
*/
#define CXN_INVALIDATE_NOTIFY 25 /* Connection invalidation
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index 648c841..56399be 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -145,7 +145,7 @@ struct bfa_fw_io_stats_s {
u32 ioh_data_oor_event; /* Data out of range */
u32 ioh_ro_ooo_event; /* Relative offset out of range */
u32 ioh_cpu_owned_event; /* IOH hit -iost owned by f/w */
- u32 ioh_unexp_frame_event; /* unexpected frame recieved
+ u32 ioh_unexp_frame_event; /* unexpected frame received
* count */
u32 ioh_err_int; /* IOH error int during data-phase
* for scsi write
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index 8e764fa..bf0067e 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -315,7 +315,7 @@ struct fc_plogi_csp_s {
query_dbc:1,
hg_supp:1;
#endif
- __be16 rxsz; /* recieve data_field size */
+ __be16 rxsz; /* receive data_field size */
__be16 conseq;
__be16 ro_bitmap;
__be32 e_d_tov;
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index 1d34921..f8debef 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -5022,7 +5022,7 @@ bfa_uf_start(struct bfa_s *bfa)
}

/*
- * Register handler for all unsolicted recieve frames.
+ * Register handler for all unsolicted receive frames.
*
* @param[in] bfa BFA instance
* @param[in] ufrecv receive handler function
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 96505e3..b3012ba 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -173,7 +173,7 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)

/**
* bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
- * @conn: iscsi connection on which RQ event occured
+ * @conn: iscsi connection on which RQ event occurred
* @ptr: driver buffer to which RQ buffer contents is to
* be copied
* @len: length of valid data inside RQ buf
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index c57d59d..d25f08a 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -263,9 +263,9 @@ struct cxgbi_skb_tx_cb {
enum cxgbi_skcb_flags {
SKCBF_TX_NEED_HDR, /* packet needs a header */
SKCBF_RX_COALESCED, /* received whole pdu */
- SKCBF_RX_HDR, /* recieved pdu header */
- SKCBF_RX_DATA, /* recieved pdu payload */
- SKCBF_RX_STATUS, /* recieved ddp status */
+ SKCBF_RX_HDR, /* received pdu header */
+ SKCBF_RX_DATA, /* received pdu payload */
+ SKCBF_RX_STATUS, /* received ddp status */
SKCBF_RX_DATA_DDPD, /* pdu payload ddp'd */
SKCBF_RX_HCRC_ERR, /* header digest error */
SKCBF_RX_DCRC_ERR, /* data digest error */
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index b0f8523..f35c8ba 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1774,7 +1774,7 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
dc395x_statev(acb, srb, &scsi_status);

/*
- * if there were any exception occured scsi_status
+ * if there were any exception occurred scsi_status
* will be modify to bus free phase new scsi_status
* transfer out from ... previous dc395x_statev
*/
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 625c6be..317a416 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -1902,7 +1902,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip,
* fcoe_ctlr_vn_rport_callback - Event handler for rport events.
* @lport: The lport which is receiving the event
* @rdata: remote port private data
- * @event: The event that occured
+ * @event: The event that occurred
*
* Locking Note: The rport lock must not be held when calling this function.
*/
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 69b7aa5..643f6d5 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -174,7 +174,7 @@
Future Domain sold DOS BIOS source for $250 and the UN*X driver source was
$750, but these required a non-disclosure agreement, so even if I could
have afforded them, they would *not* have been useful for writing this
- publically distributable driver. Future Domain technical support has
+ publicly distributable driver. Future Domain technical support has
provided some information on the phone and have sent a few useful FAXs.
They have been much more helpful since they started to recognize that the
word "Linux" refers to an operating system :-).
diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h
index 120a062..d969855 100644
--- a/drivers/scsi/gdth.h
+++ b/drivers/scsi/gdth.h
@@ -895,7 +895,7 @@ typedef struct {
u8 ldr_no; /* log. drive no. */
u8 rw_attribs; /* r/w attributes */
u8 cluster_type; /* cluster properties */
- u8 media_changed; /* Flag:MOUNT/UNMOUNT occured */
+ u8 media_changed; /* Flag:MOUNT/UNMOUNT occurred */
u32 start_sec; /* start sector */
} hdr[MAX_LDRIVES]; /* host drives */
struct {
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 9627d06..b637b55 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -1917,7 +1917,7 @@ static int int_initio_scsi_rst(struct initio_host * host)
}

/**
- * int_initio_scsi_resel - Reselection occured
+ * int_initio_scsi_resel - Reselection occurred
* @host: InitIO host adapter
*
* A SCSI reselection event has been signalled and the interrupt
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index c5a10f9..b4675ca 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -163,7 +163,7 @@ static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp)
* fc_lport_rport_callback() - Event handler for rport events
* @lport: The lport which is receiving the event
* @rdata: private remote port data
- * @event: The event that occured
+ * @event: The event that occurred
*
* Locking Note: The rport lock should not be held when calling
* this function.
@@ -770,7 +770,7 @@ EXPORT_SYMBOL(fc_lport_set_local_id);

/**
* fc_lport_recv_flogi_req() - Receive a FLOGI request
- * @lport: The local port that recieved the request
+ * @lport: The local port that received the request
* @rx_fp: The FLOGI frame
*
* A received FLOGI request indicates a point-to-point connection.
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 0dd43bb..f7e281b 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1929,7 +1929,7 @@ out:
* @rxxri: Receive exchange id
* @len: Number of data bytes
*
- * This function allocates and posts a data buffer of sufficient size to recieve
+ * This function allocates and posts a data buffer of sufficient size to receive
* an unsolicted CT command.
**/
static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri,
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index bb01596..de988ef 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4467,7 +4467,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
if ((vport->fc_flag & FC_RSCN_MODE) &&
!(vport->fc_flag & FC_NDISC_ACTIVE)) {
if (lpfc_rscn_payload_check(vport, did)) {
- /* If we've already recieved a PLOGI from this NPort
+ /* If we've already received a PLOGI from this NPort
* we don't need to try to discover it again.
*/
if (ndlp->nlp_flag & NLP_RCV_PLOGI)
@@ -4483,7 +4483,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
} else
ndlp = NULL;
} else {
- /* If we've already recieved a PLOGI from this NPort,
+ /* If we've already received a PLOGI from this NPort,
* or we are already in the process of discovery on it,
* we don't need to try to discover it again.
*/
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a359d2b..319ec89 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6414,7 +6414,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
return IOCB_ERROR;
}
wqe->els_req.payload_len = xmit_len;
- /* Els_reguest64 has a TMO */
+ /* Els_request64 has a TMO */
bf_set(wqe_tmo, &wqe->els_req.wqe_com,
iocbq->iocb.ulpTimeout);
/* Need a VF for word 4 set the vf bit*/
@@ -9589,7 +9589,7 @@ out:
* @cq: Pointer to the completion queue.
* @wcqe: Pointer to a completion queue entry.
*
- * This routine process a slow-path work-queue or recieve queue completion queue
+ * This routine process a slow-path work-queue or receive queue completion queue
* entry.
*
* Return: true if work posted to worker thread, otherwise false.
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h
index 5ead128..7d40e2b 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -11,7 +11,7 @@
*
* FILE : mega_common.h
*
- * Libaray of common routine used by all low-level megaraid drivers
+ * Library of common routine used by all low-level megaraid drivers
*/

#ifndef _MEGA_COMMON_H_
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 5708cb2..1febff2 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -3973,7 +3973,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data)
* NOTE: The commands issuance functionality is not generalized and
* implemented in context of "get ld map" command only. If required, the
* command issuance logical can be trivially pulled out and implemented as a
- * standalone libary. For now, this should suffice since there is no other
+ * standalone library. For now, this should suffice since there is no other
* user of this interface.
*
* Return 0 on success.
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 9ead039..6e1e3be 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -926,7 +926,7 @@ _base_interrupt(int irq, void *bus_id)
}

/**
- * mpt2sas_base_release_callback_handler - clear interupt callback handler
+ * mpt2sas_base_release_callback_handler - clear interrupt callback handler
* @cb_idx: callback index
*
* Return nothing.
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index e92b77a..cb93810 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -1860,7 +1860,7 @@ _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
*
* This allows ownership of the specified buffer to returned to the driver,
* allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
+ * overwriting information in the buffer.
*/
static long
_ctl_diag_release(void __user *arg, enum block_state state)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index 69916e4..12db44c 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -383,7 +383,7 @@ struct mpt2_diag_query {
*
* This allows ownership of the specified buffer to returned to the driver,
* allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
+ * overwriting information in the buffer.
*/
struct mpt2_diag_release {
struct mpt2_ioctl_header hdr;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 5ded3db..516e6f7 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2944,7 +2944,7 @@ _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
* @smid: system request message index
*
* This will check delayed target reset list, and feed the
- * next reqeust.
+ * next request.
*
* Return 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
@@ -2984,7 +2984,7 @@ _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid)
*
* This routine added to better handle cable breaker.
*
- * This handles the case where driver recieves multiple expander
+ * This handles the case where driver receives multiple expander
* add and delete events in a single shot. When there is a delete event
* the routine will void any pending add events waiting in the event queue.
*
@@ -3248,7 +3248,7 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
/**
* _scsih_setup_eedp - setup MPI request for EEDP transfer
* @scmd: pointer to scsi command object
- * @mpi_request: pointer to the SCSI_IO reqest message frame
+ * @mpi_request: pointer to the SCSI_IO request message frame
*
* Supporting protection 1 and 3.
*
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 321cf3a..672a6e8 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -928,7 +928,7 @@ static void _pmcraid_fire_command(struct pmcraid_cmd *cmd)
unsigned long lock_flags;

/* Add this command block to pending cmd pool. We do this prior to
- * writting IOARCB to ioarrin because IOA might complete the command
+ * writing IOARCB to ioarrin because IOA might complete the command
* by the time we are about to add it to the list. Response handler
* (isr/tasklet) looks for cmd block in the pending pending list.
*/
@@ -2536,7 +2536,7 @@ static void pmcraid_request_sense(struct pmcraid_cmd *cmd)

/* request sense might be called as part of error response processing
* which runs in tasklets context. It is possible that mid-layer might
- * schedule queuecommand during this time, hence, writting to IOARRIN
+ * schedule queuecommand during this time, hence, writing to IOARRIN
* must be protect by host_lock
*/
pmcraid_send_cmd(cmd, pmcraid_erp_done,
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 631fefc..f5ba09c 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -539,7 +539,7 @@ struct sts_entry_24xx {
* If DIF Error is set in comp_status, these additional fields are
* defined:
* &data[10] : uint8_t report_runt_bg[2]; - computed guard
- * &data[12] : uint8_t actual_dif[8]; - DIF Data recieved
+ * &data[12] : uint8_t actual_dif[8]; - DIF Data received
* &data[20] : uint8_t expected_dif[8]; - DIF Data computed
*/
};
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d17ed9a..712518d 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -414,7 +414,7 @@ skip_rio:
"marked OFFLINE!\n");
vha->flags.online = 0;
} else {
- /* Check to see if MPI timeout occured */
+ /* Check to see if MPI timeout occurred */
if ((mbx & MBX_3) && (ha->flags.port0))
set_bit(MPI_RESET_NEEDED,
&vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index e473e9f..f8e3669 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -303,7 +303,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
!test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {

qla_printk(KERN_WARNING, ha,
- "Mailbox command timeout occured. "
+ "Mailbox command timeout occurred. "
"Scheduling ISP " "abort. eeh_busy: 0x%x\n",
ha->flags.eeh_busy);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
@@ -321,7 +321,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
!test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {

qla_printk(KERN_WARNING, ha,
- "Mailbox command timeout occured. "
+ "Mailbox command timeout occurred. "
"Issuing ISP abort.\n");

set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
@@ -3792,7 +3792,7 @@ qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq,
mcp->mb[20] = LSW(MSD(mreq->send_dma));
mcp->mb[21] = MSW(MSD(mreq->send_dma));

- /* recieve data address */
+ /* receive data address */
mcp->mb[16] = LSW(mreq->rcv_dma);
mcp->mb[17] = MSW(mreq->rcv_dma);
mcp->mb[6] = LSW(MSD(mreq->rcv_dma));
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index fdb96a3..306df74 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2597,7 +2597,7 @@ qla82xx_calc_dsd_lists(uint16_t dsds)
* qla82xx_start_scsi() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
- * Returns non-zero if a failure occured, else zero.
+ * Returns non-zero if a failure occurred, else zero.
*/
int
qla82xx_start_scsi(srb_t *sp)
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 2fc0045..c1ed697 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -179,7 +179,7 @@ struct srb {
uint16_t flags; /* (1) Status flags. */

#define SRB_DMA_VALID BIT_3 /* DMA Buffer mapped. */
-#define SRB_GOT_SENSE BIT_4 /* sense data recieved. */
+#define SRB_GOT_SENSE BIT_4 /* sense data received. */
uint8_t state; /* (1) Status flags. */

#define SRB_NO_QUEUE_STATE 0 /* Request is in between states */
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index a2ed201..26a8a45 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -499,7 +499,7 @@ scsi_netlink_init(void)
SCSI_NL_GRP_CNT, scsi_nl_rcv_msg, NULL,
THIS_MODULE);
if (!scsi_nl_sock) {
- printk(KERN_ERR "%s: register of recieve handler failed\n",
+ printk(KERN_ERR "%s: register of receive handler failed\n",
__func__);
netlink_unregister_notifier(&scsi_netlink_notifier);
return;
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 998c01b..d15d021 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -2378,7 +2378,7 @@ fc_flush_devloss(struct Scsi_Host *shost)
* fc_remove_host - called to terminate any fc_transport-related elements for a scsi host.
* @shost: Which &Scsi_Host
*
- * This routine is expected to be called immediately preceeding the
+ * This routine is expected to be called immediately preceding the
* a driver's call to scsi_remove_host().
*
* WARNING: A driver utilizing the fc_transport, which fails to call
@@ -4120,7 +4120,7 @@ fc_bsg_remove(struct request_queue *q)
/* drain all requests in the queue */
while (1) {
/* need the lock to fetch a request
- * this may fetch the same reqeust as the previous pass
+ * this may fetch the same request as the previous pass
*/
req = blk_fetch_request(q);
/* save requests in use and starved */
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 71a1219..1bd740a 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -1415,7 +1415,7 @@ static void do_polling_transfer(struct pl022 *pl022)
SSP_CR1(pl022->virtbase));

dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n");
- /* FIXME: insert a timeout so we don't hang here indefinately */
+ /* FIXME: insert a timeout so we don't hang here indefinitely */
while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
readwriter(pl022);

diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 2521f75..eb30c6e 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -3735,7 +3735,7 @@ static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
return PYX_TRANSPORT_LU_COMM_FAILURE;

if (cmd->data_length < 24) {
- printk(KERN_WARNING "SPC-PR: Recieved PR OUT parameter list"
+ printk(KERN_WARNING "SPC-PR: Received PR OUT parameter list"
" length too small: %u\n", cmd->data_length);
return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
}
@@ -3778,7 +3778,7 @@ static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
*/
if (!(spec_i_pt) && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) &&
(cmd->data_length != 24)) {
- printk(KERN_WARNING "SPC-PR: Recieved PR OUT illegal parameter"
+ printk(KERN_WARNING "SPC-PR: Received PR OUT illegal parameter"
" list length: %u\n", cmd->data_length);
return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
}
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 28b6292..e5389a2 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2567,7 +2567,7 @@ static int transport_execute_tasks(struct se_cmd *cmd)
}
/*
* Call transport_cmd_check_stop() to see if a fabric exception
- * has occured that prevents execution.
+ * has occurred that prevents execution.
*/
if (!(transport_cmd_check_stop(cmd, 0, TRANSPORT_PROCESSING))) {
/*
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index b001019..0510888 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -487,7 +487,7 @@ DSPbase +
8-9 Hardware Status Register Read Only
A-B Hardware Control Register Read Write
C-D Host Transmit (Write) Data Buffer Access Port (buffer input)Write Only
-E-F Host Recieve (Read) Data Buffer Access Port (buffer input) Read Only
+E-F Host Receive (Read) Data Buffer Access Port (buffer input) Read Only
************************************************************************/

static inline void ixj_read_HSR(IXJ *j)
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index c3425bb..b6f7d52 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -255,7 +255,7 @@ static int hvc_iucv_write(struct hvc_iucv_private *priv,
default:
written = -EIO;
}
- /* remove buffer if an error has occured or received data
+ /* remove buffer if an error has occurred or received data
* is not correct */
if (rc || (rb->mbuf->version != MSG_VERSION) ||
(rb->msg.length != MSG_SIZE(rb->mbuf->datalen)))
@@ -620,7 +620,7 @@ static void hvc_iucv_hangup(struct hvc_iucv_private *priv)
* the index of an struct hvc_iucv_private instance.
*
* This routine notifies the HVC back-end that a tty hangup (carrier loss,
- * virtual or otherwise) has occured.
+ * virtual or otherwise) has occurred.
* The z/VM IUCV HVC device driver ignores virtual hangups (vhangup())
* to keep an existing IUCV communication path established.
* (Background: vhangup() is called from user space (by getty or login) to
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 3975df6..e3ddd21 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1616,7 +1616,7 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
up->port.iotype == UPIO_DWAPB32) &&
(iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* The DesignWare APB UART has an Busy Detect (0x07)
- * interrupt meaning an LCR write attempt occured while the
+ * interrupt meaning an LCR write attempt occurred while the
* UART was busy. The interrupt must be cleared by reading
* the UART status register (USR) and the LCR re-written. */
unsigned int status;
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index e95c524..f723167 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -261,7 +261,7 @@ static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
}
#endif

-/* Reqeust IRQ, Setup clock */
+/* Request IRQ, Setup clock */
static int sport_startup(struct uart_port *port)
{
struct sport_uart_port *up = (struct sport_uart_port *)port;
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 53a4682..8a869e5 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1248,7 +1248,7 @@ static void icom_set_termios(struct uart_port *port,
}
}

- /* Enable Transmitter and Reciever */
+ /* Enable Transmitter and Receiver */
offset =
(unsigned long) &ICOM_PORT->statStg->rcv[0] -
(unsigned long) ICOM_PORT->statStg;
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index 38a509c..b704c8c 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -273,7 +273,7 @@ struct neo_uart_struct {
u8 fctr; /* WR FCTR - Feature Control Reg */
u8 efr; /* WR EFR - Enhanced Function Reg */
u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */
- u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */
+ u8 rfifo; /* WR RXCNT/RXTRG - Receive FIFO Reg */
u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */
u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */
u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 910870e..54a03f0 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -843,7 +843,7 @@ static int max3107_startup(struct uart_port *port)
/* Setup IRQ */
if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING,
"max3107", s)) {
- dev_err(&s->spi->dev, "IRQ reguest failed\n");
+ dev_err(&s->spi->dev, "IRQ request failed\n");
destroy_workqueue(s->workqueue);
s->workqueue = NULL;
return -EBUSY;
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index b62857b..6d18830 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX availabe interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/

diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c
index cff9a30..5b65066 100644
--- a/drivers/tty/serial/sn_console.c
+++ b/drivers/tty/serial/sn_console.c
@@ -481,7 +481,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
while (port->sc_ops->sal_input_pending()) {
ch = port->sc_ops->sal_getc();
if (ch < 0) {
- printk(KERN_ERR "sn_console: An error occured while "
+ printk(KERN_ERR "sn_console: An error occurred while "
"obtaining data from the console (0x%0x)\n", ch);
break;
}
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 3f4848e..0a96549 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1160,7 +1160,7 @@ static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
}

/*
- * requst_firmware_nowait() callback function
+ * request_firmware_nowait() callback function
*
* This function is called by the kernel when a firmware is made available,
* or if it times out waiting for the firmware.
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 99ac70e..9c2dfc7 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1830,7 +1830,7 @@ static int uea_start_reset(struct uea_softc *sc)

/* mask interrupt */
sc->booting = 1;
- /* We need to set this here because, a ack timeout could have occured,
+ /* We need to set this here because, a ack timeout could have occurred,
* but before we start the reboot, the ack occurs and set this to 1.
* So we will failed to wait Ready CMV.
*/
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index f6b3c25..a03fbc1 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -907,7 +907,7 @@ static inline int c67x00_end_of_data(struct c67x00_td *td)

/* Remove all td's from the list which come
* after last_td and are meant for the same pipe.
- * This is used when a short packet has occured */
+ * This is used when a short packet has occurred */
static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
struct c67x00_td *last_td)
{
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 5eeb570..b4ea54d 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -52,7 +52,7 @@
*/

/*
- * The only reason to have several buffers is to accomodate assumptions
+ * The only reason to have several buffers is to accommodate assumptions
* in line disciplines. They ask for empty space amount, receive our URB size,
* and proceed to issue several 1-character writes, assuming they will fit.
* The very first write takes a complete URB. Fortunately, this only happens
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 6a54634..385acb8 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -483,7 +483,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
}

done += n_characters;
- /* Terminate if end-of-message bit recieved from device */
+ /* Terminate if end-of-message bit received from device */
if ((buffer[8] & 0x01) && (actual >= n_characters + 12))
remaining = 0;
else
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index f8dd726..79918bc 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev)
return 0;
}

-/* Calculates fifo start of endpoint based on preceeding endpoints */
+/* Calculates fifo start of endpoint based on preceding endpoints */
static int udc_set_txfifo_addr(struct udc_ep *ep)
{
struct udc *dev;
@@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
if (use_dma) {
/* BNA event ? */
if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
- DBG(dev, "BNA ep%dout occured - DESPTR = %x \n",
+ DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n",
ep->num, readl(&ep->regs->desptr));
/* clear BNA */
writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
@@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
}
/* HE event ? */
if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
- dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num);
+ dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num);

/* clear HE */
writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
@@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
/* BNA ? */
if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
dev_err(&dev->pdev->dev,
- "BNA ep%din occured - DESPTR = %08lx \n",
+ "BNA ep%din occurred - DESPTR = %08lx \n",
ep->num,
(unsigned long) readl(&ep->regs->desptr));

@@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
/* HE event ? */
if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
dev_err(&dev->pdev->dev,
- "HE ep%dn occured - DESPTR = %08lx \n",
+ "HE ep%dn occurred - DESPTR = %08lx \n",
ep->num, (unsigned long) readl(&ep->regs->desptr));

/* clear HE */
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index bea5b82..e35e24f 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -208,14 +208,14 @@ struct qe_frame{
/* Frame status field */
/* Receive side */
#define FRAME_OK 0x00000000 /* Frame tranmitted or received OK */
-#define FRAME_ERROR 0x80000000 /* Error occured on frame */
+#define FRAME_ERROR 0x80000000 /* Error occurred on frame */
#define START_FRAME_LOST 0x40000000 /* START_FRAME_LOST */
#define END_FRAME_LOST 0x20000000 /* END_FRAME_LOST */
#define RX_ER_NONOCT 0x10000000 /* Rx Non Octet Aligned Packet */
#define RX_ER_BITSTUFF 0x08000000 /* Frame Aborted --Received packet
with bit stuff error */
#define RX_ER_CRC 0x04000000 /* Received packet with CRC error */
-#define RX_ER_OVERUN 0x02000000 /* Over-run occured on reception */
+#define RX_ER_OVERUN 0x02000000 /* Over-run occurred on reception */
#define RX_ER_PID 0x01000000 /* Wrong PID received */
/* Tranmit side */
#define TX_ER_NAK 0x00800000 /* Received NAK handshake */
@@ -379,7 +379,7 @@ struct qe_udc {
#define T_LSP 0x01000000 /* Low-speed transaction */
#define T_PID 0x00c00000 /* packet id */
#define T_NAK 0x00100000 /* No ack. */
-#define T_STAL 0x00080000 /* Stall recieved */
+#define T_STAL 0x00080000 /* Stall received */
#define T_TO 0x00040000 /* time out */
#define T_UN 0x00020000 /* underrun */

diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 4c55eda..008aa27 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1228,7 +1228,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
udc->ep0_dir = USB_DIR_IN;
/* Borrow the per device status_req */
req = udc->status_req;
- /* Fill in the reqest structure */
+ /* Fill in the request structure */
*((u16 *) req->req.buf) = cpu_to_le16(tmp);
req->ep = ep;
req->req.length = 2;
@@ -1461,7 +1461,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
status = -EILSEQ;
break;
} else
- ERR("Unknown error has occured (0x%x)!\n",
+ ERR("Unknown error has occurred (0x%x)!\n",
errors);

} else if (le32_to_cpu(curr_td->size_ioc_sts)
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 1eca8b4..3aa1ab2 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2186,7 +2186,7 @@ static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
/* borrow the per device status_req */
req = dev->status_req;

- /* fill in the reqest structure */
+ /* fill in the request structure */
*((u16 *) req->req.buf) = cpu_to_le16(status_data);
req->ep = ep;
req->req.length = 2;
@@ -2968,7 +2968,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
handle_port_change(dev);
}

- /* suspend interrrupt */
+ /* suspend interrupt */
if (irq_sts & STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
handle_bus_suspend(dev);
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index d5468a7..3f6e246 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1310,7 +1310,7 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)

req = udc->status_req;

- /* fill in the reqest structure */
+ /* fill in the request structure */
if (empty == false) {
*((u16 *) req->req.buf) = cpu_to_le16(status);
req->req.length = 2;
@@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
return IRQ_NONE;
}

- /* Clear all the interrupts occured */
+ /* Clear all the interrupts occurred */
writel(status, &udc->op_regs->usbsts);

if (status & USBSTS_ERR)
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index b120dbb..3ae2ca3 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -809,7 +809,7 @@ static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
}

/**
- * pch_udc_write_ep_interrupts() - Clear endpoint interupts
+ * pch_udc_write_ep_interrupts() - Clear endpoint interrupts
* @dev: Reference to structure of type pch_udc_regs
* @val: The value to be written to interrupt register
*/
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ef825c3..271c130 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1176,7 +1176,7 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
writel(ctrl, hsotg->regs + reg);

dev_dbg(hsotg->dev,
- "writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+ "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
ctrl, reg, readl(hsotg->regs + reg));

/* don't belive we need to anything more to get the EP
@@ -2188,7 +2188,7 @@ irq_retry:

/* these next two seem to crop-up occasionally causing the core
* to shutdown the USB transfer, so try clearing them and logging
- * the occurence. */
+ * the occurrence. */

if (gintsts & S3C_GINTSTS_GOUTNakEff) {
dev_info(hsotg->dev, "GOUTNakEff triggered\n");
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 38fe058..52c261a 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -40,7 +40,7 @@
#define TD_RXER 0x0020 /* Rx error or not */

#define TD_NAK 0x0010 /* No ack. */
-#define TD_STAL 0x0008 /* Stall recieved */
+#define TD_STAL 0x0008 /* Stall received */
#define TD_TO 0x0004 /* time out */
#define TD_UN 0x0002 /* underrun */
#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */
@@ -337,7 +337,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
pkt->status = USB_TD_RX_ER_NONOCT;
else
fhci_err(usb->fhci, "illegal error "
- "occured\n");
+ "occurred\n");
} else if (td_status & TD_NAK)
pkt->status = USB_TD_TX_ER_NAK;
else if (td_status & TD_TO)
@@ -347,7 +347,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
else if (td_status & TD_STAL)
pkt->status = USB_TD_TX_ER_STALL;
else
- fhci_err(usb->fhci, "illegal error occured\n");
+ fhci_err(usb->fhci, "illegal error occurred\n");
} else if ((extra_data & TD_TOK_IN) &&
pkt->len > td_length - CRC_SIZE) {
pkt->status = USB_TD_RX_DATA_UNDERUN;
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 71c3caa..d16bc8d 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -82,7 +82,7 @@
#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */
#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */
#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */
-#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occurred */
#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */
#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */
#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index e0cb12b..1455c11 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -2879,7 +2879,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
/* Ok, we have more job to do! :) */

for (i = 0; i < num - 1; i++) {
- /* Get free micro URB poll till a free urb is recieved */
+ /* Get free micro URB poll till a free urb is received */

do {
murb = (struct urb *) oxu_murb_alloc(oxu);
@@ -2911,7 +2911,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,

/* Last urb requires special handling */

- /* Get free micro URB poll till a free urb is recieved */
+ /* Get free micro URB poll till a free urb is received */
do {
murb = (struct urb *) oxu_murb_alloc(oxu);
if (!murb)
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index c80c7d9..460f054 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -113,7 +113,7 @@ struct whc_std {
* @urb: the URB this struct is for.
* @qset: the qset associated to the URB.
* @dequeue_work: the work to remove the URB when dequeued.
- * @is_async: the URB belongs to async sheduler or not.
+ * @is_async: the URB belongs to async scheduler or not.
* @status: the status to be returned when calling wusbhc_giveback_urb.
*/
struct whc_urb {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 2fe3046..c5d03e0 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -699,7 +699,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* most these gadgets, end of is signified either by a short packet,
* or filling the last byte of the buffer. (Sending extra data in
* that last pckate should trigger an overflow fault.) But in mode 1,
- * we don't get DMA completion interrrupt for short packets.
+ * we don't get DMA completion interrupt for short packets.
*
* Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
* to get endpoint interrupt on every DMA req, but that didn't seem
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
index a8d83e2..458326d 100644
--- a/drivers/uwb/drp.c
+++ b/drivers/uwb/drp.c
@@ -741,12 +741,12 @@ void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
* DRP notifications can occur for three different reasons:
*
* - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as
- * the target or source have been recieved.
+ * the target or source have been received.
*
* These DRP IEs could be new or for an existing reservation.
*
* If the DRP IE for an existing reservation ceases to be to
- * recieved for at least mMaxLostBeacons, the reservation should be
+ * received for at least mMaxLostBeacons, the reservation should be
* considered to be terminated. Note that the TERMINATE reason (see
* below) may not always be signalled (e.g., the remote device has
* two or more reservations established with the RC).
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
index 2784929..3de630b 100644
--- a/drivers/uwb/reset.c
+++ b/drivers/uwb/reset.c
@@ -52,7 +52,7 @@ const char *__strerror[] = {
"cancelled",
"invalid state",
"invalid size",
- "ack not recieved",
+ "ack not received",
"no more asie notification",
};

diff --git a/drivers/video/aty/mach64_cursor.c b/drivers/video/aty/mach64_cursor.c
index 2ba8b3c..e6c60ed 100644
--- a/drivers/video/aty/mach64_cursor.c
+++ b/drivers/video/aty/mach64_cursor.c
@@ -17,7 +17,7 @@

/*
* The hardware cursor definition requires 2 bits per pixel. The
- * Cursor size reguardless of the visible cursor size is 64 pixels
+ * Cursor size regardless of the visible cursor size is 64 pixels
* by 64 lines. The total memory required to define the cursor is
* 16 bytes / line for 64 lines or 1024 bytes of data. The data
* must be in a contigiuos format. The 2 bit cursor code values are
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 8d61ef9..8b7d473 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -763,7 +763,7 @@ static int fb_wait_for_vsync(struct fb_info *info)

/*
* Set flag to 0 and wait for isr to set to 1. It would seem there is a
- * race condition here where the ISR could have occured just before or
+ * race condition here where the ISR could have occurred just before or
* just after this set. But since we are just coarsely waiting for
* a frame to complete then that's OK. i.e. if the frame completed
* just before this code executed then we have to wait another full
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index f4a3277..04251ce 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -33,7 +33,7 @@
* for driver private data (info->par). info->par (if any) will be
* aligned to sizeof(long).
*
- * Returns the new structure, or NULL if an error occured.
+ * Returns the new structure, or NULL if an error occurred.
*
*/
struct fb_info *framebuffer_alloc(size_t size, struct device *dev)
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 2ffce4d..b6a2b58 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -26,7 +26,7 @@
* Theory of Operation:
* The Watch-Dog Timer is provided to ensure that standalone
* Systems can always recover from catastrophic conditions that
- * caused the CPU to crash. This condition may have occured by
+ * caused the CPU to crash. This condition may have occurred by
* external EMI or a software bug. When the CPU stops working
* correctly, hardware on the board will either perform a hardware
* reset (cold boot) or a non-maskable interrupt (NMI) to bring the
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index 0461858..ced0264 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -201,7 +201,7 @@ static void sch311x_wdt_get_status(int *status)
spin_lock(&sch311x_wdt_data.io_lock);

/* -- Watchdog timer control --
- * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured
+ * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occurred
* Bit 1 Reserved
* Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning)
* Bit 3 P20 Force Timeout enabled:
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index 8a1f0bc..4b3462b 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -191,7 +191,7 @@ static inline void wdt_timer_conf(unsigned char conf)
static inline void wdt_timer_ctrl(unsigned char reg)
{
/* -- Watchdog timer control --
- * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured
+ * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occurred
* Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
* Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning)
* Bit 3 P20 Force Timeout enabled:
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 9127eda..5f405ce 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -90,7 +90,7 @@ static void wdt_setload(unsigned int timeout)
/*
* sp805 runs counter with given value twice, after the end of first
* counter it gives an interrupt and then starts counter again. If
- * interrupt already occured then it resets the system. This is why
+ * interrupt already occurred then it resets the system. This is why
* load is half of what should be required.
*/
load = div_u64(rate, 2) * timeout - 1;
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 7468147..5d08441 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -5,7 +5,7 @@
* domain gets 1024 event channels, but NR_IRQ is not that large, we
* must dynamically map irqs<->event channels. The event channels
* interface with the rest of the kernel by defining a xen interrupt
- * chip. When an event is recieved, it is mapped to an irq and sent
+ * chip. When an event is received, it is mapped to an irq and sent
* through the normal interrupt processing path.
*
* There are four kinds of events which can be mapped to an event
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index a004008..f5b243b 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -916,7 +916,7 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes)
avail_space *= BTRFS_STRIPE_LEN;

/*
- * In order to avoid overwritting the superblock on the drive,
+ * In order to avoid overwriting the superblock on the drive,
* btrfs starts at an offset of at least 1MB when doing chunk
* allocation.
*/
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 6b61ded..5323c33 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -765,7 +765,7 @@ int __ceph_caps_issued_mask(struct ceph_inode_info *ci, int mask, int touch)
if (touch) {
struct rb_node *q;

- /* touch this + preceeding caps */
+ /* touch this + preceding caps */
__touch_cap(cap);
for (q = rb_first(&ci->i_caps); q != p;
q = rb_next(q)) {
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index bd33f87..b1539ce 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -889,7 +889,7 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia,

/*
- * XXX(truncate) this should really happen at the begginning
+ * XXX(truncate) this should really happen at the beginning
* of ->setattr. But the code is too messy to that as part
* of a larger patch. ecryptfs is also totally missing out
* on the inode_change_ok check at the beginning of
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 758323a..e2423c4 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -840,7 +840,7 @@ static int __init ecryptfs_init(void)
}
rc = ecryptfs_init_messaging();
if (rc) {
- printk(KERN_ERR "Failure occured while attempting to "
+ printk(KERN_ERR "Failure occurred while attempting to "
"initialize the communications channel to "
"ecryptfsd\n");
goto out_destroy_kthread;
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index ccce8a7..f830e3c 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1649,7 +1649,7 @@ out:

/*
* ext4_ext_insert_extent:
- * tries to merge requsted extent into the existing extent or
+ * tries to merge requested extent into the existing extent or
* inserts requested extent as new one into the tree,
* creating new leaf in the no-space case.
*/
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 9f7f9e4..af83cc7 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3791,7 +3791,7 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb,
* We could direct write to holes and fallocate.
*
* Allocated blocks to fill the hole are marked as uninitialized
- * to prevent paralel buffered read to expose the stale data
+ * to prevent parallel buffered read to expose the stale data
* before DIO complete the data IO.
*
* As to previously fallocated extents, ext4 get_block
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index d32ee94..2ab1a0d 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -24,7 +24,7 @@
*
* Returns: 0 if the data CRC is correct;
* 1 - if incorrect;
- * error code if an error occured.
+ * error code if an error occurred.
*/
static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *tn)
{
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index 3a09423..8adc50a 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -1069,7 +1069,7 @@ int diFree(struct inode *ip)
*/
if (iagp->nfreeexts == cpu_to_le32(EXTSPERIAG - 1)) {
/* in preparation for removing the iag from the
- * ag extent free list, read the iags preceeding
+ * ag extent free list, read the iags preceding
* and following the iag on the ag extent free
* list.
*/
@@ -1095,7 +1095,7 @@ int diFree(struct inode *ip)
int inofreefwd = le32_to_cpu(iagp->inofreefwd);

/* in preparation for removing the iag from the
- * ag inode free list, read the iags preceeding
+ * ag inode free list, read the iags preceding
* and following the iag on the ag inode free
* list. before reading these iags, we must make
* sure that we already don't have them in hand
@@ -2036,7 +2036,7 @@ static int diAllocBit(struct inomap * imap, struct iag * iagp, int ino)

/* check if this is the last free inode within the iag.
* if so, it will have to be removed from the ag free
- * inode list, so get the iags preceeding and following
+ * inode list, so get the iags preceding and following
* it on the list.
*/
if (iagp->nfreeinos == cpu_to_le32(1)) {
@@ -2208,7 +2208,7 @@ static int diNewExt(struct inomap * imap, struct iag * iagp, int extno)

/* check if this is the last free extent within the
* iag. if so, the iag must be removed from the ag
- * free extent list, so get the iags preceeding and
+ * free extent list, so get the iags preceding and
* following the iag on this list.
*/
if (iagp->nfreeexts == cpu_to_le32(1)) {
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 7bf029e..7051f5e 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -301,7 +301,7 @@ nfs_file_mmap(struct file * file, struct vm_area_struct * vma)
* disk, but it retrieves and clears ctx->error after synching, despite
* the two being set at the same time in nfs_context_set_write_error().
* This is because the former is used to notify the _next_ call to
- * nfs_file_write() that a write error occured, and hence cause it to
+ * nfs_file_write() that a write error occurred, and hence cause it to
* fall back to doing a synchronous write.
*/
static int
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index d98d021..99d7f6b 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -3647,7 +3647,7 @@ find_lockstateowner_str(struct inode *inode, clientid_t *clid,
/*
* Alloc a lock owner structure.
* Called in nfsd4_lock - therefore, OPEN and OPEN_CONFIRM (if needed) has
- * occured.
+ * occurred.
*
* strhashval = lock_ownerstr_hashval
*/
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index a91b69a..09f630c 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -9,7 +9,7 @@
* Copyright 2006 Hewlett-Packard Development Company, L.P.
*
* Copyright (C) 2009 Eric Paris <Red Hat Inc>
- * inotify was largely rewriten to make use of the fsnotify infrastructure
+ * inotify was largely rewritten to make use of the fsnotify infrastructure
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 4cd5d5d..d9bc04d 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -9,7 +9,7 @@
* Copyright 2006 Hewlett-Packard Development Company, L.P.
*
* Copyright (C) 2009 Eric Paris <Red Hat Inc>
- * inotify was largely rewriten to make use of the fsnotify infrastructure
+ * inotify was largely rewritten to make use of the fsnotify infrastructure
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
index f5094ee..0990be5 100644
--- a/fs/ntfs/attrib.c
+++ b/fs/ntfs/attrib.c
@@ -1181,7 +1181,7 @@ not_found:
* for, i.e. if one wants to add the attribute to the mft record this is the
* correct place to insert its attribute list entry into.
*
- * When -errno != -ENOENT, an error occured during the lookup. @ctx->attr is
+ * When -errno != -ENOENT, an error occurred during the lookup. @ctx->attr is
* then undefined and in particular you should not rely on it not changing.
*/
int ntfs_attr_lookup(const ATTR_TYPE type, const ntfschar *name,
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index a627ed8..dbe32b5 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -2529,7 +2529,7 @@ retry_truncate:
* specifies that the behaviour is unspecified thus we do not
* have to do anything. This means that in our implementation
* in the rare case that the file is mmap()ped and a write
- * occured into the mmap()ped region just beyond the file size
+ * occurred into the mmap()ped region just beyond the file size
* and writepage has not yet been called to write out the page
* (which would clear the area beyond the file size) and we now
* extend the file size to incorporate this dirty region
diff --git a/fs/ntfs/logfile.c b/fs/ntfs/logfile.c
index 4dadcdf..c71de29 100644
--- a/fs/ntfs/logfile.c
+++ b/fs/ntfs/logfile.c
@@ -669,7 +669,7 @@ err_out:
* of cases where we think that a volume is dirty when in fact it is clean.
* This should only affect volumes that have not been shutdown cleanly but did
* not have any pending, non-check-pointed i/o, i.e. they were completely idle
- * at least for the five seconds preceeding the unclean shutdown.
+ * at least for the five seconds preceding the unclean shutdown.
*
* This function assumes that the $LogFile journal has already been consistency
* checked by a call to ntfs_check_logfile() and in particular if the $LogFile
diff --git a/fs/ntfs/logfile.h b/fs/ntfs/logfile.h
index b5a6f08..aa2b6ac 100644
--- a/fs/ntfs/logfile.h
+++ b/fs/ntfs/logfile.h
@@ -222,7 +222,7 @@ typedef struct {
/* 24*/ sle64 file_size; /* Usable byte size of the log file. If the
restart_area_offset + the offset of the
file_size are > 510 then corruption has
- occured. This is the very first check when
+ occurred. This is the very first check when
starting with the restart_area as if it
fails it means that some of the above values
will be corrupted by the multi sector
diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
index 326e747..35cdee3 100644
--- a/fs/ntfs/mft.c
+++ b/fs/ntfs/mft.c
@@ -1442,7 +1442,7 @@ static int ntfs_mft_bitmap_extend_allocation_nolock(ntfs_volume *vol)
// Note: It will need to be a special mft record and if none of
// those are available it gets rather complicated...
ntfs_error(vol->sb, "Not enough space in this mft record to "
- "accomodate extended mft bitmap attribute "
+ "accommodate extended mft bitmap attribute "
"extent. Cannot handle this yet.");
ret = -EOPNOTSUPP;
goto undo_alloc;
@@ -1879,7 +1879,7 @@ static int ntfs_mft_data_extend_allocation_nolock(ntfs_volume *vol)
// and we would then need to update all references to this mft
// record appropriately. This is rather complicated...
ntfs_error(vol->sb, "Not enough space in this mft record to "
- "accomodate extended mft data attribute "
+ "accommodate extended mft data attribute "
"extent. Cannot handle this yet.");
ret = -EOPNOTSUPP;
goto undo_alloc;
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 29099a0..b52706d 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -458,7 +458,7 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
* the volume on boot and updates them.
*
* When remounting read-only, mark the volume clean if no volume errors
- * have occured.
+ * have occurred.
*/
if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
static const char *es = ". Cannot remount read-write.";
@@ -1269,7 +1269,7 @@ static int check_windows_hibernation_status(ntfs_volume *vol)
"hibernated on the volume.");
return 0;
}
- /* A real error occured. */
+ /* A real error occurred. */
ntfs_error(vol->sb, "Failed to find inode number for "
"hiberfil.sys.");
return ret;
@@ -1370,7 +1370,7 @@ static bool load_and_init_quota(ntfs_volume *vol)
NVolSetQuotaOutOfDate(vol);
return true;
}
- /* A real error occured. */
+ /* A real error occurred. */
ntfs_error(vol->sb, "Failed to find inode number for $Quota.");
return false;
}
@@ -1454,7 +1454,7 @@ not_enabled:
NVolSetUsnJrnlStamped(vol);
return true;
}
- /* A real error occured. */
+ /* A real error occurred. */
ntfs_error(vol->sb, "Failed to find inode number for "
"$UsnJrnl.");
return false;
@@ -2292,7 +2292,7 @@ static void ntfs_put_super(struct super_block *sb)
ntfs_commit_inode(vol->mft_ino);

/*
- * If a read-write mount and no volume errors have occured, mark the
+ * If a read-write mount and no volume errors have occurred, mark the
* volume clean. Also, re-commit all affected inodes.
*/
if (!(sb->s_flags & MS_RDONLY)) {
@@ -2496,7 +2496,7 @@ static s64 get_nr_free_clusters(ntfs_volume *vol)
if (vol->nr_clusters & 63)
nr_free += 64 - (vol->nr_clusters & 63);
up_read(&vol->lcnbmp_lock);
- /* If errors occured we may well have gone below zero, fix this. */
+ /* If errors occurred we may well have gone below zero, fix this. */
if (nr_free < 0)
nr_free = 0;
ntfs_debug("Exiting.");
@@ -2561,7 +2561,7 @@ static unsigned long __get_nr_free_mft_records(ntfs_volume *vol,
}
ntfs_debug("Finished reading $MFT/$BITMAP, last index = 0x%lx.",
index - 1);
- /* If errors occured we may well have gone below zero, fix this. */
+ /* If errors occurred we may well have gone below zero, fix this. */
if (nr_free < 0)
nr_free = 0;
ntfs_debug("Exiting.");
diff --git a/fs/ocfs2/cluster/quorum.c b/fs/ocfs2/cluster/quorum.c
index a873667..7f6600e 100644
--- a/fs/ocfs2/cluster/quorum.c
+++ b/fs/ocfs2/cluster/quorum.c
@@ -89,7 +89,7 @@ static void o2quo_fence_self(void)
};
}

-/* Indicate that a timeout occured on a hearbeat region write. The
+/* Indicate that a timeout occurred on a hearbeat region write. The
* other nodes in the cluster may consider us dead at that time so we
* want to "fence" ourselves so that we don't scribble on the disk
* after they think they've recovered us. This can't solve all
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 849fb4a..93bb426 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -2129,7 +2129,7 @@ leave:
}

/**
- * ocfs2_prep_new_orphaned_file() - Prepare the orphan dir to recieve a newly
+ * ocfs2_prep_new_orphaned_file() - Prepare the orphan dir to receive a newly
* allocated file. This is different from the typical 'add to orphan dir'
* operation in that the inode does not yet exist. This is a problem because
* the orphan dir stringifies the inode block number to come up with it's
diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h
index 8ce7398..1ec56fd 100644
--- a/fs/ocfs2/stackglue.h
+++ b/fs/ocfs2/stackglue.h
@@ -126,7 +126,7 @@ struct ocfs2_stack_operations {
*
* ->connect() must not return until it is guaranteed that
*
- * - Node down notifications for the filesystem will be recieved
+ * - Node down notifications for the filesystem will be received
* and passed to conn->cc_recovery_handler().
* - Locking requests for the filesystem will be processed.
*/
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 3cfb2e9..fdef5f8 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -396,7 +396,7 @@ static struct page *reiserfs_get_page(struct inode *dir, size_t n)
struct address_space *mapping = dir->i_mapping;
struct page *page;
/* We can deadlock if we try to free dentries,
- and an unlink/rmdir has just occured - GFP_NOFS avoids this */
+ and an unlink/rmdir has just occurred - GFP_NOFS avoids this */
mapping_set_gfp_mask(mapping, GFP_NOFS);
page = read_mapping_page(mapping, n >> PAGE_CACHE_SHIFT, NULL);
if (!IS_ERR(page)) {
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index c6a2e78..54a7964 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -647,7 +647,7 @@ static struct buffer_head *inode_getblk(struct inode *inode, sector_t block,
iinfo->i_lenExtents += inode->i_sb->s_blocksize;
}

- /* if the extent the requsted block is located in contains multiple
+ /* if the extent the requested block is located in contains multiple
* blocks, split the extent into at most three extents. blocks prior
* to requested block, requested block, and blocks after requested
* block */
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index a55c1b4..15b2c84 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -381,7 +381,7 @@ xfs_aio_write_isize_update(

/*
* If this was a direct or synchronous I/O that failed (such as ENOSPC) then
- * part of the I/O may have been written to disk before the error occured. In
+ * part of the I/O may have been written to disk before the error occurred. In
* this case the on-disk file size may have been adjusted beyond the in-memory
* file size and now needs to be truncated back.
*/
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index 45b5cb1..a133058 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -135,7 +135,7 @@ xfs_qm_newmount(
*/
if (quotaondisk && !XFS_QM_NEED_QUOTACHECK(mp)) {
/*
- * If an error occured, qm_mount_quotas code
+ * If an error occurred, qm_mount_quotas code
* has already disabled quotas. So, just finish
* mounting, and get on with the boring life
* without disk quotas.
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index aa0ebb7..28bf589 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -101,7 +101,7 @@ xlog_get_bp(
/*
* We do log I/O in units of log sectors (a power-of-2
* multiple of the basic block size), so we round up the
- * requested size to acommodate the basic blocks required
+ * requested size to accommodate the basic blocks required
* for complete log sectors.
*
* In addition, the buffer may be used for a non-sector-
@@ -112,7 +112,7 @@ xlog_get_bp(
* an issue. Nor will this be a problem if the log I/O is
* done in basic blocks (sector size 1). But otherwise we
* extend the buffer by one extra log sector to ensure
- * there's space to accomodate this possiblility.
+ * there's space to accommodate this possiblility.
*/
if (nbblks > 1 && log->l_sectBBsize > 1)
nbblks += log->l_sectBBsize;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index d8e6f8c..da58fef 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -953,7 +953,7 @@ xfs_release(
* If we previously truncated this file and removed old data
* in the process, we want to initiate "early" writeout on
* the last close. This is an attempt to combat the notorious
- * NULL files problem which is particularly noticable from a
+ * NULL files problem which is particularly noticeable from a
* truncate down, buffered (re-)write (delalloc), followed by
* a crash. What we are effectively doing here is
* significantly reducing the time window where we'd otherwise
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index 1da8af6..1ac0c03 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -219,9 +219,9 @@ struct ttm_mem_type_manager_func {
* @mem::mm_node should be set to a non-null value, and
* @mem::start should be set to a value identifying the beginning
* of the range allocated, and the function should return zero.
- * If the memory region accomodate the buffer object, @mem::mm_node
+ * If the memory region accommodate the buffer object, @mem::mm_node
* should be set to NULL, and the function should return 0.
- * If a system error occured, preventing the request to be fulfilled,
+ * If a system error occurred, preventing the request to be fulfilled,
* the function should return a negative error code.
*
* Note that @mem::mm_node will only be dereferenced by
diff --git a/include/linux/atmlec.h b/include/linux/atmlec.h
index 39c917f..48a2257 100644
--- a/include/linux/atmlec.h
+++ b/include/linux/atmlec.h
@@ -82,7 +82,7 @@ struct atmlec_msg {
__u16 lec_id; /* requestor lec_id */
__u32 tran_id; /* transaction id */
unsigned char mac_addr[ETH_ALEN]; /* dst mac addr */
- unsigned char atm_addr[ATM_ESA_LEN]; /* reqestor ATM addr */
+ unsigned char atm_addr[ATM_ESA_LEN]; /* requestor ATM addr */
} proxy; /*
* For mapping LE_ARP requests to responses. Filled by
* zeppelin, returned by kernel. Used only when proxying
diff --git a/include/linux/can/error.h b/include/linux/can/error.h
index d4127fd..5958074 100644
--- a/include/linux/can/error.h
+++ b/include/linux/can/error.h
@@ -51,7 +51,7 @@
#define CAN_ERR_PROT_BIT1 0x10 /* unable to send recessive bit */
#define CAN_ERR_PROT_OVERLOAD 0x20 /* bus overload */
#define CAN_ERR_PROT_ACTIVE 0x40 /* active error announcement */
-#define CAN_ERR_PROT_TX 0x80 /* error occured on transmission */
+#define CAN_ERR_PROT_TX 0x80 /* error occurred on transmission */

/* error in CAN protocol (location) / data[3] */
#define CAN_ERR_PROT_LOC_UNSPEC 0x00 /* unspecified */
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index ce104e3..f0e1ad2 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -240,7 +240,7 @@ struct cgroup {
/* For RCU-protected deletion */
struct rcu_head rcu_head;

- /* List of events which userspace want to recieve */
+ /* List of events which userspace want to receive */
struct list_head event_list;
spinlock_t event_list_lock;
};
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 68ba85a..432282e 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -532,14 +532,14 @@ struct fb_cursor_user {
#define FB_EVENT_GET_CONSOLE_MAP 0x07
/* CONSOLE-SPECIFIC: set console to framebuffer mapping */
#define FB_EVENT_SET_CONSOLE_MAP 0x08
-/* A hardware display blank change occured */
+/* A hardware display blank change occurred */
#define FB_EVENT_BLANK 0x09
/* Private modelist is to be replaced */
#define FB_EVENT_NEW_MODELIST 0x0A
/* The resolution of the passed in fb_info about to change and
all vc's should be changed */
#define FB_EVENT_MODE_CHANGE_ALL 0x0B
-/* A software display blank change occured */
+/* A software display blank change occurred */
#define FB_EVENT_CONBLANK 0x0C
/* Get drawing requirements */
#define FB_EVENT_GET_REQ 0x0D
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 55e0d42..2da9db6 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -107,7 +107,7 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
* @next: pointer to the next irqaction for shared interrupts
* @irq: interrupt number
* @dir: pointer to the proc/irq/NN/name entry
- * @thread_fn: interupt handler function for threaded interrupts
+ * @thread_fn: interrupt handler function for threaded interrupts
* @thread: thread pointer for threaded interrupts
* @thread_flags: flags related to @thread
*/
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 16b0261..2e04887 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -98,7 +98,7 @@ struct mmc_data;
* EVENT_DATA_COMPLETE is set in @pending_events, all data-related
* interrupts must be disabled and @data_status updated with a
* snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
* snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
* bytes_xfered field of @data must be written. This is ensured by
* using barriers.
diff --git a/include/linux/netfilter/nf_conntrack_proto_gre.h b/include/linux/netfilter/nf_conntrack_proto_gre.h
index 2a10efd..6a0664c 100644
--- a/include/linux/netfilter/nf_conntrack_proto_gre.h
+++ b/include/linux/netfilter/nf_conntrack_proto_gre.h
@@ -60,7 +60,7 @@ struct gre_hdr_pptp {
__be16 payload_len; /* size of ppp payload, not inc. gre header */
__be16 call_id; /* peer's call_id for this session */
__be32 seq; /* sequence number. Present if S==1 */
- __be32 ack; /* seq number of highest packet recieved by */
+ __be32 ack; /* seq number of highest packet received by */
/* sender in this session */
};

diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 5b7e6b1..16b038a 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -435,7 +435,7 @@
#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */
#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */
-#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Suprise Down Error Reporting Capable */
+#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */
#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */
#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 27c3c6f..8684011 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -509,7 +509,7 @@ do { \
* case for x86 for example).
*
* If there is no other protection through preempt disable and/or
- * disabling interupts then one of these RMW operations can show unexpected
+ * disabling interrupts then one of these RMW operations can show unexpected
* behavior because the execution thread was rescheduled on another processor
* or an interrupt occurred and the same percpu variable was modified from
* the interrupt context.
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 2f691e4..44835fb 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -122,7 +122,7 @@
#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index bf0570a..52d9ed0 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -66,7 +66,7 @@
* are in a different address space (and may be of different sizes in some
* cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
* Zero-initialize the structure, including currently unused fields, to
- * accomodate potential future updates.
+ * accommodate potential future updates.
*
* SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
* Pass it an array of related transfers, they'll execute together.
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
index ea29330..95505f1 100644
--- a/include/linux/sunrpc/svc.h
+++ b/include/linux/sunrpc/svc.h
@@ -142,7 +142,7 @@ static inline void svc_get(struct svc_serv *serv)
extern u32 svc_max_payload(const struct svc_rqst *rqstp);

/*
- * RPC Requsts and replies are stored in one or more pages.
+ * RPC Requests and replies are stored in one or more pages.
* We maintain an array of pages for each server thread.
* Requests are copied into these pages as they arrive. Remaining
* pages are available to write the reply into.
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index e64f4c6..38cba2a 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -187,7 +187,7 @@ struct tcp_md5sig {
/* Flags for both getsockopt and setsockopt */
#define TCP_COOKIE_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */
#define TCP_COOKIE_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies,
- * supercedes everything. */
+ * supersedes everything. */

/* Flags for getsockopt */
#define TCP_S_DATA_IN (1 << 2) /* Was data received? */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index bd69b65..1a2d2d6 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -793,7 +793,7 @@ struct usbdrv_wrap {
* usb_set_intfdata() to associate driver-specific data with the
* interface. It may also use usb_set_interface() to specify the
* appropriate altsetting. If unwilling to manage the interface,
- * return -ENODEV, if genuine IO errors occured, an appropriate
+ * return -ENODEV, if genuine IO errors occurred, an appropriate
* negative errno value.
* @disconnect: Called when the interface is no longer accessible, usually
* because its device has been (or is being) disconnected or the
diff --git a/include/linux/uwb.h b/include/linux/uwb.h
index 7fc9746..3052e44 100644
--- a/include/linux/uwb.h
+++ b/include/linux/uwb.h
@@ -702,10 +702,10 @@ void edc_init(struct edc *edc)
edc->timestart = jiffies;
}

-/* Called when an error occured.
+/* Called when an error occurred.
* This is way to determine if the number of acceptable errors per time
* period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurences
+ * this scheme will not work, for example if there are periodic occurrences
* of errors that straddle updates to the start time. This scheme is
* sufficient for our usage.
*
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 83ba6a4..59b5df5 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -101,7 +101,7 @@ enum p9_req_status_t {
* Transport use an array to track outstanding requests
* instead of a list. While this may incurr overhead during initial
* allocation or expansion, it makes request lookup much easier as the
- * tag id is a index into an array. (We use tag+1 so that we can accomodate
+ * tag id is a index into an array. (We use tag+1 so that we can accommodate
* the -1 tag for the T_VERSION request).
* This also has the nice effect of only having to allocate wait_queues
* once, instead of constantly allocating and freeing them. Its possible
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index f53c8e3..b3368c6 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -636,7 +636,7 @@ struct libfc_function_template {
int (*rport_logoff)(struct fc_rport_priv *);

/*
- * Recieve a request from a remote port.
+ * Receive a request from a remote port.
*
* STATUS: OPTIONAL
*/
diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h
index 741ae7e..2fbcd9e 100644
--- a/include/scsi/libiscsi_tcp.h
+++ b/include/scsi/libiscsi_tcp.h
@@ -51,7 +51,7 @@ struct iscsi_segment {
iscsi_segment_done_fn_t *done;
};

-/* Socket connection recieve helper */
+/* Socket connection receive helper */
struct iscsi_tcp_recv {
struct iscsi_hdr *hdr;
struct iscsi_segment segment;
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
index 53a9e88..0a50799 100644
--- a/include/scsi/osd_initiator.h
+++ b/include/scsi/osd_initiator.h
@@ -265,7 +265,7 @@ int osd_execute_request_async(struct osd_request *or,
* @osi - Recievs a more detailed error report information (optional).
* @silent - Do not print to dmsg (Even if enabled)
* @bad_obj_list - Some commands act on multiple objects. Failed objects will
- * be recieved here (optional)
+ * be received here (optional)
* @max_obj - Size of @bad_obj_list.
* @bad_attr_list - List of failing attributes (optional)
* @max_attr - Size of @bad_attr_list.
diff --git a/include/sound/cs46xx_dsp_task_types.h b/include/sound/cs46xx_dsp_task_types.h
index 5cf920b..be56947 100644
--- a/include/sound/cs46xx_dsp_task_types.h
+++ b/include/sound/cs46xx_dsp_task_types.h
@@ -203,7 +203,7 @@ struct dsp_task_tree_context_block {

u32 saverfe;

- /* Value may be overwriten by stack save algorithm.
+ /* Value may be overwritten by stack save algorithm.
Retain the size of the stack data saved here if used */
___DSP_DUAL_16BIT_ALLOC(
reserved1,
diff --git a/include/sound/cs8427.h b/include/sound/cs8427.h
index f862cff..79f7017 100644
--- a/include/sound/cs8427.h
+++ b/include/sound/cs8427.h
@@ -151,7 +151,7 @@
#define CS8427_PRO (1<<3) /* Channel status block format indicator */
#define CS8427_AUDIO (1<<2) /* Audio indicator (0 = audio, 1 = nonaudio */
#define CS8427_COPY (1<<1) /* 0 = copyright asserted, 1 = copyright not asserted */
-#define CS8427_ORIG (1<<0) /* SCMS generation indicator, 0 = 1st generation or highter, 1 = original */
+#define CS8427_ORIG (1<<0) /* SCMS generation indicator, 0 = 1st generation or higher, 1 = original */

/* CS8427_REG_RECVERRORS */
/* CS8427_REG_RECVERRMASK for CS8427_RERR */
diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
index 534cac8..a782287 100644
--- a/include/xen/interface/physdev.h
+++ b/include/xen/interface/physdev.h
@@ -158,7 +158,7 @@ struct physdev_manage_pci_ext {
};

/*
- * Argument to physdev_op_compat() hypercall. Superceded by new physdev_op()
+ * Argument to physdev_op_compat() hypercall. Superseded by new physdev_op()
* hypercall since 0x00030202.
*/
struct physdev_op {
@@ -206,7 +206,7 @@ struct physdev_get_free_pirq {
#define PHYSDEVOP_IRQ_UNMASK_NOTIFY 4

/*
- * These all-capitals physdev operation names are superceded by the new names
+ * These all-capitals physdev operation names are superseded by the new names
* (defined above) since interface version 0x00030202.
*/
#define PHYSDEVOP_IRQ_STATUS_QUERY PHYSDEVOP_irq_status_query
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index b24d702..c54a42bc 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -157,7 +157,7 @@ struct css_id {
};

/*
- * cgroup_event represents events which userspace want to recieve.
+ * cgroup_event represents events which userspace want to receive.
*/
struct cgroup_event {
/*
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index baa5c4a..c1deb1d 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -594,7 +594,7 @@ out:
* @desc: the interrupt description structure for this irq
*
* Interrupt occures on the falling and/or rising edge of a hardware
- * signal. The occurence is latched into the irq controller hardware
+ * signal. The occurrence is latched into the irq controller hardware
* and must be acked in order to be reenabled. After the ack another
* interrupt can happen on the same source even before the first one
* is handled by the associated event handler. If this happens it
diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index ee74b35..376066e 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -153,7 +153,7 @@ static inline void store_stacktrace(struct task_struct *tsk,
}

/**
- * __account_scheduler_latency - record an occured latency
+ * __account_scheduler_latency - record an occurred latency
* @tsk - the task struct of the task hitting the latency
* @usecs - the duration of the latency in microseconds
* @inter - 1 if the sleep was interruptible, 0 if uninterruptible
diff --git a/kernel/module.c b/kernel/module.c
index efa290e..4ed7fdf 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2971,7 +2971,7 @@ static const char *get_ksymbol(struct module *mod,
else
nextval = (unsigned long)mod->module_core+mod->core_text_size;

- /* Scan for closest preceeding symbol, and next symbol. (ELF
+ /* Scan for closest preceding symbol, and next symbol. (ELF
starts real symbols at 1). */
for (i = 1; i < mod->num_symtab; i++) {
if (mod->symtab[i].st_shndx == SHN_UNDEF)
diff --git a/kernel/padata.c b/kernel/padata.c
index 7510194..1f779bd 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -768,7 +768,7 @@ static int __padata_remove_cpu(struct padata_instance *pinst, int cpu)
}

/**
- * padata_remove_cpu - remove a cpu from the one or both(serial and paralell)
+ * padata_remove_cpu - remove a cpu from the one or both(serial and parallel)
* padata cpumasks.
*
* @pinst: padata instance
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 7b5db6a..27616cb 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -227,7 +227,7 @@ power_attr(state);
* writing to 'state'. It first should read from 'wakeup_count' and store
* the read value. Then, after carrying out its own preparations for the system
* transition to a sleep state, it should write the stored value to
- * 'wakeup_count'. If that fails, at least one wakeup event has occured since
+ * 'wakeup_count'. If that fails, at least one wakeup event has occurred since
* 'wakeup_count' was read and 'state' should not be written to. Otherwise, it
* is allowed to write to 'state', but the transition will be aborted if there
* are any wakeup events detected after 'wakeup_count' was written to.
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 5404a84..f9cd5ab 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -31,7 +31,7 @@
* inaccuracies caused by missed or lost timer
* interrupts and the inability for the timer
* interrupt hardware to accuratly tick at the
- * requested HZ value. It is also not reccomended
+ * requested HZ value. It is also not recommended
* for "tick-less" systems.
*/
#define NSEC_PER_JIFFY ((u32)((((u64)NSEC_PER_SEC)<<8)/ACTHZ))
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index 19a359d..479e599 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -13,7 +13,7 @@ static char __percpu *perf_trace_buf[PERF_NR_CONTEXTS];

/*
* Force it to be aligned to unsigned long to avoid misaligned accesses
- * suprises
+ * surprises
*/
typedef typeof(unsigned long [PERF_MAX_TRACE_SIZE / sizeof(unsigned long)])
perf_trace_t;
diff --git a/kernel/user-return-notifier.c b/kernel/user-return-notifier.c
index eb27fd3..92cb706 100644
--- a/kernel/user-return-notifier.c
+++ b/kernel/user-return-notifier.c
@@ -20,7 +20,7 @@ EXPORT_SYMBOL_GPL(user_return_notifier_register);

/*
* Removes a registered user return notifier. Must be called from atomic
- * context, and from the same cpu registration occured in.
+ * context, and from the same cpu registration occurred in.
*/
void user_return_notifier_unregister(struct user_return_notifier *urn)
{
diff --git a/lib/timerqueue.c b/lib/timerqueue.c
index e3a1050..191176a 100644
--- a/lib/timerqueue.c
+++ b/lib/timerqueue.c
@@ -5,7 +5,7 @@
* Uses rbtrees for quick list adds and expiration.
*
* NOTE: All of the following functions need to be serialized
- * to avoid races. No locking is done by this libary code.
+ * to avoid races. No locking is done by this library code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index bb0b7c1..353e128 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -842,7 +842,7 @@ struct page *alloc_huge_page_node(struct hstate *h, int nid)
}

/*
- * Increase the hugetlb pool such that it can accomodate a reservation
+ * Increase the hugetlb pool such that it can accommodate a reservation
* of size 'delta'.
*/
static int gather_surplus_pages(struct hstate *h, int delta)
@@ -890,7 +890,7 @@ retry:

/*
* The surplus_list now contains _at_least_ the number of extra pages
- * needed to accomodate the reservation. Add the appropriate number
+ * needed to accommodate the reservation. Add the appropriate number
* of pages to the hugetlb pool and free the extras back to the buddy
* allocator. Commit the entire reservation here to prevent another
* process from stealing the pages as they are added to the pool but
@@ -2492,7 +2492,7 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
/*
* Currently, we are forced to kill the process in the event the
* original mapper has unmapped pages from the child due to a failed
- * COW. Warn that such a situation has occured as it may not be obvious
+ * COW. Warn that such a situation has occurred as it may not be obvious
*/
if (is_vma_resv_set(vma, HPAGE_RESV_UNMAPPED)) {
printk(KERN_WARNING
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 84225f3..c1d5867 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -265,7 +265,7 @@ static void kmemleak_disable(void);
} while (0)

/*
- * Macro invoked when a serious kmemleak condition occured and cannot be
+ * Macro invoked when a serious kmemleak condition occurred and cannot be
* recovered from. Kmemleak will be disabled and further allocation/freeing
* tracing no longer available.
*/
@@ -1006,7 +1006,7 @@ static bool update_checksum(struct kmemleak_object *object)

/*
* Memory scanning is a long process and it needs to be interruptable. This
- * function checks whether such interrupt condition occured.
+ * function checks whether such interrupt condition occurred.
*/
static int scan_should_stop(void)
{
@@ -1733,7 +1733,7 @@ static int __init kmemleak_late_init(void)

if (atomic_read(&kmemleak_error)) {
/*
- * Some error occured and kmemleak was disabled. There is a
+ * Some error occurred and kmemleak was disabled. There is a
* small chance that kmemleak_disable() was called immediately
* after setting kmemleak_initialized and we may end up with
* two clean-up threads but serialized by scan_mutex.
diff --git a/mm/percpu.c b/mm/percpu.c
index 3f93001..f34b04a 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -342,7 +342,7 @@ static void pcpu_chunk_relocate(struct pcpu_chunk *chunk, int oslot)
* @chunk: chunk of interest
*
* Determine whether area map of @chunk needs to be extended to
- * accomodate a new allocation.
+ * accommodate a new allocation.
*
* CONTEXT:
* pcpu_lock.
@@ -431,7 +431,7 @@ out_unlock:
* depending on @head, is reduced by @tail bytes and @tail byte block
* is inserted after the target block.
*
- * @chunk->map must have enough free slots to accomodate the split.
+ * @chunk->map must have enough free slots to accommodate the split.
*
* CONTEXT:
* pcpu_lock.
@@ -1436,7 +1436,7 @@ static struct pcpu_alloc_info * __init pcpu_build_alloc_info(
/*
* Determine min_unit_size, alloc_size and max_upa such that
* alloc_size is multiple of atom_size and is the smallest
- * which can accomodate 4k aligned segments which are equal to
+ * which can accommodate 4k aligned segments which are equal to
* or larger than min_unit_size.
*/
min_unit_size = max_t(size_t, size_sum, PCPU_MIN_UNIT_SIZE);
diff --git a/mm/slub.c b/mm/slub.c
index e15aa7f..f9d82ac 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3312,7 +3312,7 @@ void *__kmalloc_track_caller(size_t size, gfp_t gfpflags, unsigned long caller)

ret = slab_alloc(s, gfpflags, NUMA_NO_NODE, caller);

- /* Honor the call site pointer we recieved. */
+ /* Honor the call site pointer we received. */
trace_kmalloc(caller, ret, size, s->size, gfpflags);

return ret;
@@ -3342,7 +3342,7 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,

ret = slab_alloc(s, gfpflags, node, caller);

- /* Honor the call site pointer we recieved. */
+ /* Honor the call site pointer we received. */
trace_kmalloc_node(caller, ret, size, s->size, gfpflags, node);

return ret;
diff --git a/net/9p/client.c b/net/9p/client.c
index a848bca..cb6a360 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -178,7 +178,7 @@ free_and_return:
* @tag: numeric id for transaction
*
* this is a simple array lookup, but will grow the
- * request_slots as necessary to accomodate transaction
+ * request_slots as necessary to accommodate transaction
* ids which did not previously have a slot.
*
* this code relies on the client spinlock to manage locks, its
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 6c11eec..5df4ef9 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2162,7 +2162,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
}

if (TCP_COOKIE_OUT_NEVER & ctd.tcpct_flags) {
- /* Supercedes all other values */
+ /* Supersedes all other values */
lock_sock(sk);
if (tp->cookie_values != NULL) {
kref_put(&tp->cookie_values->kref,
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 406f320..52a9a78 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -73,7 +73,7 @@ static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
tcp_advance_send_head(sk, skb);
tp->snd_nxt = TCP_SKB_CB(skb)->end_seq;

- /* Don't override Nagle indefinately with F-RTO */
+ /* Don't override Nagle indefinitely with F-RTO */
if (tp->frto_counter == 2)
tp->frto_counter = 3;

diff --git a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
index 97c5b21..cdd6d04 100644
--- a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
+++ b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
@@ -71,7 +71,7 @@ static unsigned int ipv6_defrag(unsigned int hooknum,
if (reasm == NULL)
return NF_STOLEN;

- /* error occured or not fragmented */
+ /* error occurred or not fragmented */
if (reasm == skb)
return NF_ACCEPT;

diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c
index d434c88..85b84f4 100644
--- a/net/irda/irlap_event.c
+++ b/net/irda/irlap_event.c
@@ -708,7 +708,7 @@ static int irlap_state_reply(struct irlap_cb *self, IRLAP_EVENT event,

self->frame_sent = TRUE;
}
- /* Readjust our timer to accomodate devices
+ /* Readjust our timer to accommodate devices
* doing faster or slower discovery than us...
* Jean II */
irlap_start_query_timer(self, info->S, info->s);
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index f6054f9..72d15ac 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -967,7 +967,7 @@ static int irttp_data_indication(void *instance, void *sap,

/*
* If the peer device has given us some credits and we didn't have
- * anyone from before, then we need to shedule the tx queue.
+ * anyone from before, then we need to schedule the tx queue.
* We need to do that because our Tx have stopped (so we may not
* get any LAP flow indication) and the user may be stopped as
* well. - Jean II
diff --git a/net/irda/timer.c b/net/irda/timer.c
index 0335ba0..f418cb2 100644
--- a/net/irda/timer.c
+++ b/net/irda/timer.c
@@ -59,7 +59,7 @@ void irlap_start_query_timer(struct irlap_cb *self, int S, int s)
* slot time, plus add some extra time to properly receive the last
* discovery packet (which is longer due to extra discovery info),
* to avoid messing with for incomming connections requests and
- * to accomodate devices that perform discovery slower than us.
+ * to accommodate devices that perform discovery slower than us.
* Jean II */
timeout = ((sysctl_slot_timeout * HZ / 1000) * (S - s)
+ XIDEXTRA_TIMEOUT + SMALLBUSY_TIMEOUT);
diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h
index 1a873f0..8d8a141 100644
--- a/net/mac80211/rc80211_pid.h
+++ b/net/mac80211/rc80211_pid.h
@@ -80,7 +80,7 @@ union rc_pid_event_data {
};

struct rc_pid_event {
- /* The time when the event occured */
+ /* The time when the event occurred */
unsigned long timestamp;

/* Event ID number */
diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c
index 1ea96bc..114e509 100644
--- a/net/netfilter/ipvs/ip_vs_proto_sctp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c
@@ -560,7 +560,7 @@ static struct ipvs_sctp_nextstate
* SHUTDOWN sent from the client, waitinf for SHUT ACK from the server
*/
/*
- * We recieved the data chuck, keep the state unchanged. I assume
+ * We received the data chuck, keep the state unchanged. I assume
* that still data chuncks can be received by both the peers in
* SHUDOWN state
*/
@@ -627,7 +627,7 @@ static struct ipvs_sctp_nextstate
* SHUTDOWN sent from the server, waitinf for SHUTDOWN ACK from client
*/
/*
- * We recieved the data chuck, keep the state unchanged. I assume
+ * We received the data chuck, keep the state unchanged. I assume
* that still data chuncks can be received by both the peers in
* SHUDOWN state
*/
@@ -695,7 +695,7 @@ static struct ipvs_sctp_nextstate
* SHUTDOWN ACK from the client, awaiting for SHUTDOWN COM from server
*/
/*
- * We recieved the data chuck, keep the state unchanged. I assume
+ * We received the data chuck, keep the state unchanged. I assume
* that still data chuncks can be received by both the peers in
* SHUDOWN state
*/
@@ -765,7 +765,7 @@ static struct ipvs_sctp_nextstate
* SHUTDOWN ACK from the server, awaiting for SHUTDOWN COM from client
*/
/*
- * We recieved the data chuck, keep the state unchanged. I assume
+ * We received the data chuck, keep the state unchanged. I assume
* that still data chuncks can be received by both the peers in
* SHUDOWN state
*/
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 84f4fcc..92eb02bc 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -884,7 +884,7 @@ nf_conntrack_in(struct net *net, u_int8_t pf, unsigned int hooknum,
ret = l3proto->get_l4proto(skb, skb_network_offset(skb),
&dataoff, &protonum);
if (ret <= 0) {
- pr_debug("not prepared to track yet or error occured\n");
+ pr_debug("not prepared to track yet or error occurred\n");
NF_CT_STAT_INC_ATOMIC(net, error);
NF_CT_STAT_INC_ATOMIC(net, invalid);
ret = -ret;
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index bcf47eb..237cc19 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -707,7 +707,7 @@ static const char *ct_sdp_header_search(const char *dptr, const char *limit,
}

/* Locate a SDP header (optionally a substring within the header value),
- * optionally stopping at the first occurence of the term header, parse
+ * optionally stopping at the first occurrence of the term header, parse
* it and return the offset and length of the data we're interested in.
*/
int ct_sip_get_sdp_header(const struct nf_conn *ct, const char *dptr,
diff --git a/net/rds/ib_send.c b/net/rds/ib_send.c
index 71f373c..128eb5b 100644
--- a/net/rds/ib_send.c
+++ b/net/rds/ib_send.c
@@ -355,7 +355,7 @@ void rds_ib_send_cq_comp_handler(struct ib_cq *cq, void *context)
*
* Conceptually, we have two counters:
* - send credits: this tells us how many WRs we're allowed
- * to submit without overruning the reciever's queue. For
+ * to submit without overruning the receiver's queue. For
* each SEND WR we post, we decrement this by one.
*
* - posted credits: this tells us how many WRs we recently
diff --git a/net/rds/iw_cm.c b/net/rds/iw_cm.c
index 712cf2d..3a60a15 100644
--- a/net/rds/iw_cm.c
+++ b/net/rds/iw_cm.c
@@ -181,7 +181,7 @@ static int rds_iw_init_qp_attrs(struct ib_qp_init_attr *attr,
unsigned int send_size, recv_size;
int ret;

- /* The offset of 1 is to accomodate the additional ACK WR. */
+ /* The offset of 1 is to accommodate the additional ACK WR. */
send_size = min_t(unsigned int, rds_iwdev->max_wrs, rds_iw_sysctl_max_send_wr + 1);
recv_size = min_t(unsigned int, rds_iwdev->max_wrs, rds_iw_sysctl_max_recv_wr + 1);
rds_iw_ring_resize(send_ring, send_size - 1);
diff --git a/net/rds/iw_send.c b/net/rds/iw_send.c
index 6280ea0..545d8ee 100644
--- a/net/rds/iw_send.c
+++ b/net/rds/iw_send.c
@@ -307,7 +307,7 @@ void rds_iw_send_cq_comp_handler(struct ib_cq *cq, void *context)
*
* Conceptually, we have two counters:
* - send credits: this tells us how many WRs we're allowed
- * to submit without overruning the reciever's queue. For
+ * to submit without overruning the receiver's queue. For
* each SEND WR we post, we decrement this by one.
*
* - posted credits: this tells us how many WRs we recently
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 60600d3..84f82b6 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -673,7 +673,7 @@ static sctp_xmit_t sctp_packet_can_append_data(struct sctp_packet *packet,
* data will fit or delay in hopes of bundling a full
* sized packet.
* Don't delay large message writes that may have been
- * fragmeneted into small peices.
+ * fragmeneted into small pieces.
*/
if ((len < max) && chunk->msg->can_delay) {
retval = SCTP_XMIT_NAGLE_DELAY;
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 4b4eb7c..ff6a678 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -4402,7 +4402,7 @@ static sctp_disposition_t sctp_sf_violation_ctsn(
}

/* Handle protocol violation of an invalid chunk bundling. For example,
- * when we have an association and we recieve bundled INIT-ACK, or
+ * when we have an association and we receive bundled INIT-ACK, or
* SHUDOWN-COMPLETE, our peer is clearly violationg the "MUST NOT bundle"
* statement from the specs. Additinally, there might be an attacker
* on the path and we may not want to continue this communication.
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index c7f7e49..06b9b75 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -243,7 +243,7 @@ int sctp_ulpq_tail_event(struct sctp_ulpq *ulpq, struct sctp_ulpevent *event)
} else {
/*
* If fragment interleave is enabled, we
- * can queue this to the recieve queue instead
+ * can queue this to the receive queue instead
* of the lobby.
*/
if (sctp_sk(sk)->frag_interleave)
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index c431f5a..7e22f74 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -504,7 +504,7 @@ static int xs_nospace(struct rpc_task *task)
* EAGAIN: The socket was blocked, please call again later to
* complete the request
* ENOTCONN: Caller needs to invoke connect logic then call again
- * other: Some other error occured, the request was not sent
+ * other: Some other error occurred, the request was not sent
*/
static int xs_udp_send_request(struct rpc_task *task)
{
@@ -590,7 +590,7 @@ static inline void xs_encode_tcp_record_marker(struct xdr_buf *buf)
* EAGAIN: The socket was blocked, please call again later to
* complete the request
* ENOTCONN: Caller needs to invoke connect logic then call again
- * other: Some other error occured, the request was not sent
+ * other: Some other error occurred, the request was not sent
*
* XXX: In the case of soft timeouts, should we eventually give up
* if sendmsg is not able to make progress?
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 37693b6..e760f0c 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -813,7 +813,7 @@ static void handle_channel(struct wiphy *wiphy,
if (r) {
/*
* We will disable all channels that do not match our
- * recieved regulatory rule unless the hint is coming
+ * received regulatory rule unless the hint is coming
* from a Country IE and the Country IE had no information
* about a band. The IEEE 802.11 spec allows for an AP
* to send only a subset of the regulatory rules allowed,
diff --git a/scripts/dtc/livetree.c b/scripts/dtc/livetree.c
index c9209d5..26d0e1e 100644
--- a/scripts/dtc/livetree.c
+++ b/scripts/dtc/livetree.c
@@ -155,7 +155,7 @@ struct node *merge_nodes(struct node *old_node, struct node *new_node)
}
}

- /* if no collision occured, add child to the old node. */
+ /* if no collision occurred, add child to the old node. */
if (new_child)
add_child(old_node, new_child);
}
diff --git a/security/apparmor/procattr.c b/security/apparmor/procattr.c
index 04a2cf8..b6cf297 100644
--- a/security/apparmor/procattr.c
+++ b/security/apparmor/procattr.c
@@ -149,7 +149,7 @@ int aa_setprocattr_changehat(char *args, size_t size, int test)

/**
* aa_setprocattr_changeprofile - handle procattr interface to changeprofile
- * @fqname: args received from writting to /proc/<pid>/attr/current (NOT NULL)
+ * @fqname: args received from writing to /proc/<pid>/attr/current (NOT NULL)
* @onexec: true if change_profile should be delayed until exec
* @test: true if this is a test of change_profile permissions
*
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 533bf32..0b3c72a 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -2332,7 +2332,7 @@ static void smack_d_instantiate(struct dentry *opt_dentry, struct inode *inode)
switch (sbp->s_magic) {
case SMACK_MAGIC:
/*
- * Casey says that it's a little embarassing
+ * Casey says that it's a little embarrassing
* that the smack file system doesn't do
* extended attributes.
*/
diff --git a/sound/drivers/pcm-indirect2.c b/sound/drivers/pcm-indirect2.c
index 3c93c23..f7fa4b1 100644
--- a/sound/drivers/pcm-indirect2.c
+++ b/sound/drivers/pcm-indirect2.c
@@ -47,7 +47,7 @@ void snd_pcm_indirect2_stat(struct snd_pcm_substream *substream,
int seconds = (rec->lastbytetime - rec->firstbytetime) / HZ;

snd_printk(KERN_DEBUG "STAT: mul_elapsed: %u, mul_elapsed_real: %d, "
- "irq_occured: %d\n",
+ "irq_occurred: %d\n",
rec->mul_elapsed, rec->mul_elapsed_real, rec->irq_occured);
snd_printk(KERN_DEBUG "STAT: min_multiple: %d (irqs/period)\n",
rec->min_multiple);
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index a25fb7b..e946e45 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -273,7 +273,7 @@ static void snd_uart16550_io_loop(struct snd_uart16550 * uart)
snd_uart16550_add_timer(uart);
}

-/* NOTES ON SERVICING INTERUPTS
+/* NOTES ON SERVICING INTERRUPTS
* ---------------------------
* After receiving a interrupt, it is important to indicate to the UART that
* this has been done.
diff --git a/sound/oss/swarm_cs4297a.c b/sound/oss/swarm_cs4297a.c
index 44357d8..09d4648 100644
--- a/sound/oss/swarm_cs4297a.c
+++ b/sound/oss/swarm_cs4297a.c
@@ -875,7 +875,7 @@ static void start_adc(struct cs4297a_state *s)
if (s->prop_adc.fmt & AFMT_S8 || s->prop_adc.fmt & AFMT_U8) {
//
// now only use 16 bit capture, due to truncation issue
- // in the chip, noticable distortion occurs.
+ // in the chip, noticeable distortion occurs.
// allocate buffer and then convert from 16 bit to
// 8 bit for the user buffer.
//
diff --git a/sound/pci/asihpi/hpi.h b/sound/pci/asihpi/hpi.h
index 23399d0..5b0aca8 100644
--- a/sound/pci/asihpi/hpi.h
+++ b/sound/pci/asihpi/hpi.h
@@ -709,7 +709,7 @@ enum HPI_AESEBU_ERRORS {
#define HPI_PAD_TITLE_LEN 64
/** The text string containing the comment. */
#define HPI_PAD_COMMENT_LEN 256
-/** The PTY when the tuner has not recieved any PTY. */
+/** The PTY when the tuner has not received any PTY. */
#define HPI_PAD_PROGRAM_TYPE_INVALID 0xffff
/** \} */

diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
index 0cf400f..f58d5af 100644
--- a/sound/pci/ctxfi/cthw20k1.c
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -82,7 +82,7 @@ static void hw_write_pci(struct hw *hw, u32 reg, u32 data);

#define SRCLA_LA 0x03FFFFFF

-/* Mixer Parameter Ring ram Low and Hight register.
+/* Mixer Parameter Ring ram Low and High register.
* Fixed-point value in 8.24 format for parameter channel */
#define MPRLH_PITCH 0xFFFFFFFF

diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
index b6b11bf..c7bb374 100644
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -80,7 +80,7 @@ static void hw_write_20kx(struct hw *hw, u32 reg, u32 data);

#define SRCLA_LA 0x0FFFFFFF

-/* Mixer Parameter Ring ram Low and Hight register.
+/* Mixer Parameter Ring ram Low and High register.
* Fixed-point value in 8.24 format for parameter channel */
#define MPRLH_PITCH 0xFFFFFFFF

diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c
index 833e718..304411c 100644
--- a/sound/pci/pcxhr/pcxhr_core.c
+++ b/sound/pci/pcxhr/pcxhr_core.c
@@ -1042,11 +1042,11 @@ void pcxhr_msg_tasklet(unsigned long arg)
int i, j;

if (mgr->src_it_dsp & PCXHR_IRQ_FREQ_CHANGE)
- snd_printdd("TASKLET : PCXHR_IRQ_FREQ_CHANGE event occured\n");
+ snd_printdd("TASKLET : PCXHR_IRQ_FREQ_CHANGE event occurred\n");
if (mgr->src_it_dsp & PCXHR_IRQ_TIME_CODE)
- snd_printdd("TASKLET : PCXHR_IRQ_TIME_CODE event occured\n");
+ snd_printdd("TASKLET : PCXHR_IRQ_TIME_CODE event occurred\n");
if (mgr->src_it_dsp & PCXHR_IRQ_NOTIFY)
- snd_printdd("TASKLET : PCXHR_IRQ_NOTIFY event occured\n");
+ snd_printdd("TASKLET : PCXHR_IRQ_NOTIFY event occurred\n");
if (mgr->src_it_dsp & (PCXHR_IRQ_FREQ_CHANGE | PCXHR_IRQ_TIME_CODE)) {
/* clear events FREQ_CHANGE and TIME_CODE */
pcxhr_init_rmh(prmh, CMD_TEST_IT);
@@ -1055,7 +1055,7 @@ void pcxhr_msg_tasklet(unsigned long arg)
err, prmh->stat[0]);
}
if (mgr->src_it_dsp & PCXHR_IRQ_ASYNC) {
- snd_printdd("TASKLET : PCXHR_IRQ_ASYNC event occured\n");
+ snd_printdd("TASKLET : PCXHR_IRQ_ASYNC event occurred\n");

pcxhr_init_rmh(prmh, CMD_ASYNC);
prmh->cmd[0] |= 1; /* add SEL_ASYNC_EVENTS */
@@ -1233,7 +1233,7 @@ irqreturn_t pcxhr_interrupt(int irq, void *dev_id)
reg = PCXHR_INPL(mgr, PCXHR_PLX_L2PCIDB);
PCXHR_OUTPL(mgr, PCXHR_PLX_L2PCIDB, reg);

- /* timer irq occured */
+ /* timer irq occurred */
if (reg & PCXHR_IRQ_TIMER) {
int timer_toggle = reg & PCXHR_IRQ_TIMER;
/* is a 24 bit counter */
@@ -1288,7 +1288,7 @@ irqreturn_t pcxhr_interrupt(int irq, void *dev_id)
if (reg & PCXHR_IRQ_MASK) {
if (reg & PCXHR_IRQ_ASYNC) {
/* as we didn't request any async notifications,
- * some kind of xrun error will probably occured
+ * some kind of xrun error will probably occurred
*/
/* better resynchronize all streams next interrupt : */
mgr->dsp_time_last = PCXHR_DSP_TIME_INVALID;
diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c
index 1b8f674..64b4336 100644
--- a/sound/pci/sis7019.c
+++ b/sound/pci/sis7019.c
@@ -308,7 +308,7 @@ static irqreturn_t sis_interrupt(int irq, void *dev)
u32 intr, status;

/* We only use the DMA interrupts, and we don't enable any other
- * source of interrupts. But, it is possible to see an interupt
+ * source of interrupts. But, it is possible to see an interrupt
* status that didn't actually interrupt us, so eliminate anything
* we're not expecting to avoid falsely claiming an IRQ, and an
* ensuing endless loop.
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index edce8a2..bc823a5 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -358,7 +358,7 @@ static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id)
* filling dummy data, serial automatically start to
* consume them and then will generate normal buffer
* empty interrupts.
- * If both buffer underflow and buffer empty are occured,
+ * If both buffer underflow and buffer empty are occurred,
* it is better to do nomal data transfer than empty one
*/
snd_ps3_program_dma(card,
diff --git a/sound/ppc/snd_ps3_reg.h b/sound/ppc/snd_ps3_reg.h
index 03fdee4..a7962c5 100644
--- a/sound/ppc/snd_ps3_reg.h
+++ b/sound/ppc/snd_ps3_reg.h
@@ -316,13 +316,13 @@ DISABLED=Interrupt generation disabled.

/*
Audio Port Interrupt Status Register
-Indicates Interrupt status, which interrupt has occured, and can clear
+Indicates Interrupt status, which interrupt has occurred, and can clear
each interrupt in this register.
Writing 1b to a field containing 1b clears field and de-asserts interrupt.
Writing 0b to a field has no effect.
Field vaules are the following:
-0 - Interrupt hasn't occured.
-1 - Interrupt has occured.
+0 - Interrupt hasn't occurred.
+1 - Interrupt has occurred.

31 24 23 16 15 8 7 0
@@ -756,7 +756,7 @@ The STATUS field can be used to monitor the progress of a DMA request.
DONE indicates the previous request has completed.
EVENT indicates that the DMA engine is waiting for the EVENT to occur.
PENDING indicates that the DMA engine has not started processing this
-request, but the EVENT has occured.
+request, but the EVENT has occurred.
DMA indicates that the data transfer is in progress.
NOTIFY indicates that the notifier signalling end of transfer is being written.
CLEAR indicated that the previous transfer was cleared.
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 5d230ce..7fbfa05 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -672,7 +672,7 @@ static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai)
/* re-enable interrupts */
ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);

- /* Re-enable recieve and transmit as appropriate */
+ /* Re-enable receive and transmit as appropriate */
cr = 0;
cr |=
(ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index b9cb1fc..77f13f9 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3612,7 +3612,7 @@ static int wm8962_gpio_request(struct gpio_chip *chip, unsigned offset)

/* The WM8962 GPIOs aren't linearly numbered. For simplicity
* we export linear numbers and error out if the unsupported
- * ones are requsted.
+ * ones are requested.
*/
switch (offset + 1) {
case 2:
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index 3167be6..d0737ed 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -330,7 +330,7 @@ static int cx81801_hangup(struct tty_struct *tty)
return 0;
}

-/* Line discipline .recieve_buf() */
+/* Line discipline .receive_buf() */
static void cx81801_receive(struct tty_struct *tty,
const unsigned char *cp, char *fp, int count)
{
--
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Rob Clark: "Re: [PATCH 09/10] MCDE: Add build files and bus"
Previous message: David Rientjes: "Re: [PATCH 1/3 for 2.6.38] oom: oom_kill_process: don't set TIF_MEMDIEif !p->mm"
In reply to: Jiri Kosina: "Re: [PATCH v2/resend] trivial: fix common spelling mistakes"
Next in thread: Peter Huewe: "[PATCH] staging/trivial: Fix common spelling mistakes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]