Re: [patch v2 1/3] This patch adds support for hardware basedsampling on System z processors (models z10 and up)

[Robert Richter]

On 21.01.11 05:06:52, Heinz Graalfs wrote:
> From: Heinz Graalfs <graalfs@xxxxxxxxxxxxxxxxxx>
> 
> System z's hardware sampling is described in detail in:
> 
>    SA23-2260-01 "The Load-Program-Parameter and CPU-Measurement Facilities"
> 
> The patch introduces
>  - support for System z's hardware sampler in OProfile's kernel module
>  - it adds functions that control all hardware sampling related operations as
>   - checking if hardware sampling feature is available
>     - ie: on System z models z10 and up, in LPAR mode only, and authorised during LPAR activation
>   - allocating memory for the hardware sampling feature
>   - starting/stopping hardware sampling
> 
> All functions required to start and stop hardware sampling have to be
> invoked by the oprofile kernel module as provided by the other patches of this patch set.
> 
> In case hardware based sampling cannot be setup standard timer based sampling is used by OProfile.
> 
> Signed-off-by: Mahesh Salgaonkar <mahesh@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Maran Pakkirisamy <maranp@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Heinz Graalfs <graalfs@xxxxxxxxxxxxxxxxxx>
> ---
>  arch/Kconfig                   |    3
>  arch/s390/Kconfig              |    1
>  arch/s390/oprofile/hwsampler.c | 1256 +++++++++++++++++++++++++++++++++++++++++
>  arch/s390/oprofile/hwsampler.h |  113 +++
>  4 files changed, 1373 insertions(+)

> +int hwsampler_setup()
> +{
> +       int rc;
> +       int cpu;
> +       struct hws_cpu_buffer *cb;
> +
> +       mutex_lock(&hws_sem);
> +
> +       rc = -EINVAL;
> +       if (hws_state)
> +               goto setup_exit;
> +
> +       hws_state = HWS_INIT;

hws_state is never set to zero again, so we will pass this point only
one time, even after hwsampler_shutdown(). Is this intended? Only
loading and unloading this as module would work.

Maybe we clear hws_state in hwsampler_shutdown()?

-Robert

> +
> +       init_all_cpu_buffers();
> +
> +       rc = check_hardware_prerequisites();
> +       if (rc)
> +               goto setup_exit;
> +
> +       rc = check_qsi_on_setup();
> +       if (rc)
> +               goto setup_exit;
> +
> +       rc = -EINVAL;
> +       hws_wq = create_workqueue("hwsampler");
> +       if (!hws_wq)
> +               goto setup_exit;
> +
> +       register_cpu_notifier(&hws_cpu_notifier);
> +
> +       for_each_online_cpu(cpu) {
> +               cb = &per_cpu(sampler_cpu_buffer, cpu);
> +               INIT_WORK(&cb->worker, worker);
> +               rc = smp_ctl_qsi(cpu);
> +               WARN_ON(rc);
> +               if (min_sampler_rate != cb->qsi.min_sampl_rate) {
> +                       if (min_sampler_rate) {
> +                               printk(KERN_WARNING
> +                                       "hwsampler: different min sampler rate values.\n");
> +                               if (min_sampler_rate < cb->qsi.min_sampl_rate)
> +                                       min_sampler_rate =
> +                                               cb->qsi.min_sampl_rate;
> +                       } else
> +                               min_sampler_rate = cb->qsi.min_sampl_rate;
> +               }
> +               if (max_sampler_rate != cb->qsi.max_sampl_rate) {
> +                       if (max_sampler_rate) {
> +                               printk(KERN_WARNING
> +                                       "hwsampler: different max sampler rate values.\n");
> +                               if (max_sampler_rate > cb->qsi.max_sampl_rate)
> +                                       max_sampler_rate =
> +                                               cb->qsi.max_sampl_rate;
> +                       } else
> +                               max_sampler_rate = cb->qsi.max_sampl_rate;
> +               }
> +       }
> +       register_external_interrupt(0x1407, hws_ext_handler);
> +
> +       hws_state = HWS_DEALLOCATED;
> +       rc = 0;
> +
> +setup_exit:
> +       mutex_unlock(&hws_sem);
> +       return rc;
> +}
> +
> +int hwsampler_shutdown()
> +{
> +       int rc;
> +
> +       mutex_lock(&hws_sem);
> +
> +       rc = -EINVAL;
> +       if (hws_state == HWS_DEALLOCATED || hws_state == HWS_STOPPED) {
> +               mutex_unlock(&hws_sem);
> +
> +               if (hws_wq)
> +                       flush_workqueue(hws_wq);
> +
> +               mutex_lock(&hws_sem);
> +
> +               if (hws_state == HWS_STOPPED) {
> +                       smp_ctl_clear_bit(0, 5); /* set bit 58 CR0 off */
> +                       deallocate_sdbt();
> +               }
> +               if (hws_wq) {
> +                       destroy_workqueue(hws_wq);
> +                       hws_wq = NULL;
> +               }
> +
> +               unregister_external_interrupt(0x1407, hws_ext_handler);
> +               hws_state = HWS_INIT;
> +               rc = 0;
> +       }
> +       mutex_unlock(&hws_sem);
> +
> +       unregister_cpu_notifier(&hws_cpu_notifier);
> +
> +       return rc;
> +}

-- 
Advanced Micro Devices, Inc.
Operating System Research Center

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/