[patch 06/23] arm: Cleanup irq_desc access

From: Thomas Gleixner
Date: Fri Mar 25 2011 - 09:22:05 EST


Use the proper wrappers and use the flow type in irq_data.

Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---
arch/arm/plat-orion/gpio.c | 25 ++++++++++---------------
arch/arm/plat-orion/irq.c | 2 +-
2 files changed, 11 insertions(+), 16 deletions(-)

Index: linux-2.6-tip/arch/arm/plat-orion/gpio.c
===================================================================
--- linux-2.6-tip.orig/arch/arm/plat-orion/gpio.c
+++ linux-2.6-tip/arch/arm/plat-orion/gpio.c
@@ -324,9 +324,8 @@ EXPORT_SYMBOL(orion_gpio_set_blink);
static void gpio_irq_ack(struct irq_data *d)
{
struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d);
- int type;
+ int type = irqd_get_trigger_type(d);

- type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
int pin = d->irq - ochip->secondary_irq_base;

@@ -337,11 +336,10 @@ static void gpio_irq_ack(struct irq_data
static void gpio_irq_mask(struct irq_data *d)
{
struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d);
- int type;
+ int type = irqd_get_trigger_type(d);
void __iomem *reg;
int pin;

- type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
reg = GPIO_EDGE_MASK(ochip);
else
@@ -355,11 +353,10 @@ static void gpio_irq_mask(struct irq_dat
static void gpio_irq_unmask(struct irq_data *d)
{
struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d);
- int type;
+ int type = irqd_get_trigger_type(d);
void __iomem *reg;
int pin;

- type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
reg = GPIO_EDGE_MASK(ochip);
else
@@ -389,9 +386,9 @@ static int gpio_irq_set_type(struct irq_
* Set edge/level type.
*/
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
- set_irq_handler(d->irq, handle_edge_irq);
+ __irq_set_handler_locked(d->irq, handle_edge_irq);
} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
- set_irq_handler(d->irq, handle_level_irq);
+ __irq_set_handler_locked(d->irq, handle_level_irq);
} else {
printk(KERN_ERR "failed to set irq=%d (type=%d)\n",
d->irq, type);
@@ -480,7 +477,7 @@ void __init orion_gpio_init(int gpio_bas
set_irq_chip(irq, &orion_gpio_irq_chip);
set_irq_handler(irq, handle_level_irq);
set_irq_chip_data(irq, ochip);
- irq_desc[irq].status |= IRQ_LEVEL;
+ irq_set_status_flags(irq, IRQ_LEVEL);
set_irq_flags(irq, IRQF_VALID);
}
}
@@ -488,7 +485,7 @@ void __init orion_gpio_init(int gpio_bas
void orion_gpio_irq_handler(int pinoff)
{
struct orion_gpio_chip *ochip;
- u32 cause;
+ u32 cause, type;
int i;

ochip = orion_gpio_chip_find(pinoff);
@@ -500,15 +497,14 @@ void orion_gpio_irq_handler(int pinoff)

for (i = 0; i < ochip->chip.ngpio; i++) {
int irq;
- struct irq_desc *desc;

irq = ochip->secondary_irq_base + i;

if (!(cause & (1 << i)))
continue;

- desc = irq_desc + irq;
- if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+ type = irqd_get_trigger_type(irq_get_irq_data(irq));
+ if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
/* Swap polarity (race with GPIO line) */
u32 polarity;

@@ -516,7 +512,6 @@ void orion_gpio_irq_handler(int pinoff)
polarity ^= 1 << i;
writel(polarity, GPIO_IN_POL(ochip));
}
-
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
}
Index: linux-2.6-tip/arch/arm/plat-orion/irq.c
===================================================================
--- linux-2.6-tip.orig/arch/arm/plat-orion/irq.c
+++ linux-2.6-tip/arch/arm/plat-orion/irq.c
@@ -59,7 +59,7 @@ void __init orion_irq_init(unsigned int
set_irq_chip(irq, &orion_irq_chip);
set_irq_chip_data(irq, maskaddr);
set_irq_handler(irq, handle_level_irq);
- irq_desc[irq].status |= IRQ_LEVEL;
+ irq_set_status_flags(irq, IRQ_LEVEL);
set_irq_flags(irq, IRQF_VALID);
}
}


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/