Re: linux-next: Tree for March 25 (Call trace: RCU|workqueues|block|VFS|ext4related?)

[Sedat Dilek]

On Sat, Mar 26, 2011 at 4:42 AM, Paul E. McKenney
<paulmck@xxxxxxxxxxxxxxxxxx> wrote:
> On Fri, Mar 25, 2011 at 08:42:14PM +0100, Sedat Dilek wrote:
>> On Fri, Mar 25, 2011 at 6:48 PM, Paul E. McKenney
>> <paulmck@xxxxxxxxxxxxxxxxxx> wrote:
>> > On Fri, Mar 25, 2011 at 06:40:38PM +0100, Sedat Dilek wrote:
>> >> On Fri, Mar 25, 2011 at 5:51 PM, Sedat Dilek <sedat.dilek@xxxxxxxxxxxxxx> wrote:
>> >> > On Fri, Mar 25, 2011 at 5:42 PM, Paul E. McKenney
>> >> > <paulmck@xxxxxxxxxxxxxxxxxx> wrote:
>> >> >> On Fri, Mar 25, 2011 at 08:55:16AM -0700, Josh Triplett wrote:
>> >> >>> On Fri, Mar 25, 2011 at 02:05:33PM +0100, Sedat Dilek wrote:
>> >> >>> > On Fri, Mar 25, 2011 at 11:16 AM, Sedat Dilek
>> >> >>> > <sedat.dilek@xxxxxxxxxxxxxx> wrote:
>> >> >>> > > right after I have finished building a new linux-next kernel, booting
>> >> >>> > > into desktop and archiving my build-tree (ext4) as tarball to an
>> >> >>> > > external USB harddisk (partition there is ext3).
>> >> >>> > > ( Yesterday, I have seen similiar call-traces in my logs, but it was
>> >> >>> > > hard to reproduce [1]. )
>> >> >>> > > I am unsure from where the problem aroses, if you have a hint, let me know.
>> >> >>> > >
>> >> >>> > > Regards,
>> >> >>> > > - Sedat -
>> >> >>> > >
>> >> >>> > > [1] http://lkml.org/lkml/2011/3/24/268
>> >> >>> > >
>> >> >>> > > P.S.: Attached are the dmesg outputs and my kernel-config
>> >> >>> > >
>> >> >>> >
>> >> >>> > I turned off the notebook for about 2hrs to avoid thermal problems and
>> >> >>> > hoax reports.
>> >> >>> > Jumped into desktop and started an archive job as 1st job while doing daily job.
>> >> >>> > Yeah, it is reproducible.
>> >> >>> [...]
>> >> >>> > [ Â212.453822] EXT3-fs (sdb5): mounted filesystem with ordered data mode
>> >> >>> > [ Â273.224044] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies)
>> >> >>>
>> >> >>> 15000 jiffies matches this 60-second gap, assuming you use HZ=250.
>> >> >>>
>> >> >>> > [ Â273.224059] sending NMI to all CPUs:
>> >> >>> > [ Â273.224074] NMI backtrace for cpu 0
>> >> >>> > [ Â273.224081] Modules linked in: ext3 jbd bnep rfcomm bluetooth aes_i586 aes_generic binfmt_misc ppdev acpi_cpufreq mperf cpufreq_powersave cpufreq_userspace lp cpufreq_stats cpufreq_conservative fuse snd_intel8x0 snd_intel8x0m snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm radeon thinkpad_acpi snd_seq_midi pcmcia ttm snd_rawmidi snd_seq_midi_event drm_kms_helper yenta_socket snd_seq pcmcia_rsrc drm pcmcia_core joydev snd_timer snd_seq_device snd i2c_algo_bit tpm_tis shpchp i2c_i801 tpm nsc_ircc irda snd_page_alloc soundcore pci_hotplug rng_core i2c_core tpm_bios psmouse crc_ccitt nvram parport_pc pcspkr parport evdev battery video ac processor power_supply serio_raw button arc4 ecb ath5k ath mac80211 cfg80211 rfkill autofs4 ext4 mbcache jbd2 crc16 dm_mod usbhid hid usb_storage uas sg sd_mod sr_mod crc_t10dif cdrom ata_generic ata_piix libata uhci_hcd ehci_hcd usbcore scsi_mod thermal e1000 thermal_sys floppy [last unloaded: scsi_wait_scan]
>> >> >>> > [ Â273.224367]
>> >> >>> > [ Â273.224377] Pid: 0, comm: swapper Not tainted 2.6.38-next20110325-2-686-iniza #1 IBM 2374SG6/2374SG6
>> >> >>> > [ Â273.224397] EIP: 0060:[<c11514f0>] EFLAGS: 00000807 CPU: 0
>> >> >>> > [ Â273.224414] EIP is at delay_tsc+0x16/0x5e
>> >> >>> > [ Â273.224424] EAX: 00090d42 EBX: 00002710 ECX: c133faf5 EDX: 00090d41
>> >> >>> > [ Â273.224435] ESI: 00000000 EDI: 00090d42 EBP: f5819e9c ESP: f5819e8c
>> >> >>> > [ Â273.224445] ÂDS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
>> >> >>> > [ Â273.224458] Process swapper (pid: 0, ti=f5818000 task=c13e3fa0 task.ti=c13b6000)
>> >> >>> > [ Â273.224466] Stack:
>> >> >>> > [ Â273.224472] Â00090d41 00002710 c13ee580 c13ee600 f5819ea4 c115149f f5819eac c11514bb
>> >> >>> > [ Â273.224497] Âf5819eb8 c1016532 c13ee580 f5819ed4 c1078dc1 c134e61e c134e6c2 00000000
>> >> >>> > [ Â273.224520] Â00003a98 f5c03488 f5819ee8 c1078e36 00000000 00000000 c13e3fa0 f5819ef4
>> >> >>> > [ Â273.224544] Call Trace:
>> >> >>> > [ Â273.224559] Â[<c115149f>] __delay+0x9/0xb
>> >> >>> > [ Â273.224571] Â[<c11514bb>] __const_udelay+0x1a/0x1c
>> >> >>> > [ Â273.224590] Â[<c1016532>] arch_trigger_all_cpu_backtrace+0x50/0x62
>> >> >>> > [ Â273.224608] Â[<c1078dc1>] check_cpu_stall+0x58/0xb8
>> >> >>> > [ Â273.224622] Â[<c1078e36>] __rcu_pending+0x15/0xc4
>> >> >>> > [ Â273.224637] Â[<c10791df>] rcu_check_callbacks+0x6d/0x93
>> >> >>> > [ Â273.224652] Â[<c1039c6c>] update_process_times+0x2d/0x58
>> >> >>> > [ Â273.224666] Â[<c10509e9>] tick_sched_timer+0x6b/0x9a
>> >> >>> > [ Â273.224682] Â[<c1047196>] __run_hrtimer+0x9c/0x111
>> >> >>> > [ Â273.224694] Â[<c105097e>] ? tick_sched_timer+0x0/0x9a
>> >> >>> > [ Â273.224708] Â[<c1047b38>] hrtimer_interrupt+0xd6/0x1bb
>> >> >>> > [ Â273.224727] Â[<c104fca1>] tick_do_broadcast.constprop.4+0x38/0x6a
>> >> >>> > [ Â273.224741] Â[<c104fd80>] tick_handle_oneshot_broadcast+0xad/0xe1
>> >> >>> > [ Â273.224757] Â[<c1076cc2>] ? handle_level_irq+0x0/0x63
>> >> >>> > [ Â273.224772] Â[<c1004215>] timer_interrupt+0x15/0x1c
>> >> >>> > [ Â273.224785] Â[<c107536d>] handle_irq_event_percpu+0x4e/0x164
>> >> >>> > [ Â273.224799] Â[<c1076cc2>] ? handle_level_irq+0x0/0x63
>> >> >>> > [ Â273.224811] Â[<c10754b9>] handle_irq_event+0x36/0x51
>> >> >>> > [ Â273.224824] Â[<c1076cc2>] ? handle_level_irq+0x0/0x63
>> >> >>> > [ Â273.224837] Â[<c1076d0f>] handle_level_irq+0x4d/0x63
>> >> >>> > [ Â273.224845] Â<IRQ>
>> >> >>> > [ Â273.224857] Â[<c1003b8d>] ? do_IRQ+0x35/0x80
>> >> >>> > [ Â273.224871] Â[<c12ac0f0>] ? common_interrupt+0x30/0x38
>> >> >>> > [ Â273.224886] Â[<c10400d8>] ? destroy_worker+0x52/0x6c
>> >> >>> > [ Â273.224922] Â[<f87b730f>] ? arch_local_irq_enable+0x5/0xb [processor]
>> >> >>> > [ Â273.224947] Â[<f87b7ef5>] ? acpi_idle_enter_simple+0x100/0x138 [processor]
>> >> >>> > [ Â273.224964] Â[<c11ebd92>] ? cpuidle_idle_call+0xc2/0x137
>> >> >>> > [ Â273.224978] Â[<c1001da3>] ? cpu_idle+0x89/0xa3
>> >> >>> > [ Â273.224995] Â[<c128c26c>] ? rest_init+0x58/0x5a
>> >> >>> > [ Â273.225008] Â[<c1418722>] ? start_kernel+0x315/0x31a
>> >> >>> > [ Â273.225022] Â[<c14180a2>] ? i386_start_kernel+0xa2/0xaa
>> >> >>> > [ Â273.225029] Code: e5 e8 d6 ff ff ff 5d c3 55 89 e5 8d 04 80 e8 c9 ff ff ff 5d c3 55 89 e5 57 89 c7 56 53 52 64 8b 35 04 20 47 c1 8d 76 00 0f ae e8 <e8> 6b ff ff ff 89 c3 8d 76 00 0f ae e8 e8 5e ff ff ff 89 c2 29
>> >> >>> > [ Â273.225154] Call Trace:
>> >> >>> > [ Â273.225166] Â[<c115149f>] __delay+0x9/0xb
>> >> >>> > [ Â273.225178] Â[<c11514bb>] __const_udelay+0x1a/0x1c
>> >> >>> > [ Â273.225192] Â[<c1016532>] arch_trigger_all_cpu_backtrace+0x50/0x62
>> >> >>> > [ Â273.225207] Â[<c1078dc1>] check_cpu_stall+0x58/0xb8
>> >> >>> > [ Â273.225220] Â[<c1078e36>] __rcu_pending+0x15/0xc4
>> >> >>> > [ Â273.225234] Â[<c10791df>] rcu_check_callbacks+0x6d/0x93
>> >> >>> > [ Â273.225247] Â[<c1039c6c>] update_process_times+0x2d/0x58
>> >> >>> > [ Â273.225260] Â[<c10509e9>] tick_sched_timer+0x6b/0x9a
>> >> >>> > [ Â273.225274] Â[<c1047196>] __run_hrtimer+0x9c/0x111
>> >> >>> > [ Â273.225286] Â[<c105097e>] ? tick_sched_timer+0x0/0x9a
>> >> >>> > [ Â273.225300] Â[<c1047b38>] hrtimer_interrupt+0xd6/0x1bb
>> >> >>> > [ Â273.225316] Â[<c104fca1>] tick_do_broadcast.constprop.4+0x38/0x6a
>> >> >>> > [ Â273.225330] Â[<c104fd80>] tick_handle_oneshot_broadcast+0xad/0xe1
>> >> >>> > [ Â273.225345] Â[<c1076cc2>] ? handle_level_irq+0x0/0x63
>> >> >>> > [ Â273.225358] Â[<c1004215>] timer_interrupt+0x15/0x1c
>> >> >>> > [ Â273.225370] Â[<c107536d>] handle_irq_event_percpu+0x4e/0x164
>> >> >>> > [ Â273.225384] Â[<c1076cc2>] ? handle_level_irq+0x0/0x63
>> >> >>> > [ Â273.225396] Â[<c10754b9>] handle_irq_event+0x36/0x51
>> >> >>> > [ Â273.225409] Â[<c1076cc2>] ? handle_level_irq+0x0/0x63
>> >> >>> > [ Â273.225421] Â[<c1076d0f>] handle_level_irq+0x4d/0x63
>> >> >>> > [ Â273.225429] Â<IRQ> Â[<c1003b8d>] ? do_IRQ+0x35/0x80
>> >> >>> > [ Â273.225450] Â[<c12ac0f0>] ? common_interrupt+0x30/0x38
>> >> >>> > [ Â273.225464] Â[<c10400d8>] ? destroy_worker+0x52/0x6c
>> >> >>> > [ Â273.225493] Â[<f87b730f>] ? arch_local_irq_enable+0x5/0xb [processor]
>> >> >>> > [ Â273.225517] Â[<f87b7ef5>] ? acpi_idle_enter_simple+0x100/0x138 [processor]
>> >> >>> > [ Â273.225532] Â[<c11ebd92>] ? cpuidle_idle_call+0xc2/0x137
>> >> >>> > [ Â273.225545] Â[<c1001da3>] ? cpu_idle+0x89/0xa3
>> >> >>> > [ Â273.225559] Â[<c128c26c>] ? rest_init+0x58/0x5a
>> >> >>> > [ Â273.225571] Â[<c1418722>] ? start_kernel+0x315/0x31a
>> >> >>> > [ Â273.225584] Â[<c14180a2>] ? i386_start_kernel+0xa2/0xaa
>> >> >>>
>> >> >>> Interesting. ÂLooks like RCU detected a stall while the CPU sits in
>> >> >>> cpu_idle. ÂThat *shouldn't* happen...
>> >> >>
>> >> >> There have been a few of these things recently that turned out to
>> >> >> be BIOS misconfigurations, though that would not be the first thing
>> >> >> I would suspect if the system had run other versions successfully.
>> >> >> Another possibility is that the CPU spent the full time in interrupt.
>> >> >> Get an interrupt from the idle loop, stay in interrupt for 60 seconds,
>> >> >> get an RCU CPU stall warning.
>> >> >>
>> >> >> Or I could have somehow inserted a bug in RCU. ÂBut I am not seeing
>> >> >> this in my testing.
>> >> >>
>> >> >> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ÂThanx, Paul
>> >> >>
>> >> >
>> >> > The problems started when I first saw CONFIG_RCU_CPU_STALL_TIMEOUT=60
>> >> > in my configs.
>> >> >
>> >> > This an old IBM T40p notebook with Pentium-M (Banias) UP processor.
>> >> > IIRC I have flashed the latest BIOS available for this notebook.
>> >> >
>> >> > [ Â 11.786073] thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04
>> >> > [ Â 11.786111] thinkpad_acpi: IBM ThinkPad T40p, model 2374SG6
>> >> >
>> >> > As I am still sitting in the dark, it would be very helpful to know if
>> >> > I can play with HZ or RCU kernel-config parameters.
>> >> > Can I change RCU behaviour from user-space?
>> >> >
>> >> > - Sedat -
>> >> >
>> >> > P.S.: Note to myself: Read Documentation/RCU/stallwarn.txt & check
>> >> > possible values in lib/Kconfig.debug
>> >> >
>> >>
>> >> OK, I had a deeper look at the RCU (STALL) kernel-configs.
>> >>
>> >> $ grep RCU /boot/config-2.6.38-next20110323-3-686-iniza | grep STALL
>> >> # CONFIG_RCU_CPU_STALL_DETECTOR is not set
>> >>
>> >> $ grep RCU /boot/config-2.6.38-next20110324-2-686-iniza | grep STALL
>> >> # CONFIG_RCU_CPU_STALL_DETECTOR is not set
>> >>
>> >> $ grep RCU /boot/config-2.6.38-next20110325-2-686-iniza | grep STALL
>> >> CONFIG_RCU_CPU_STALL_TIMEOUT=60
>> >
>> > Yep, you moved from a kernel version that had the stall detected disabled
>> > by default to one that enables it by default.
>> >
>> > But -next has had stall detection enabled by default for a good
>> > long time now.
>> >
>> >> With my todays (next-20110325) linux-next kernel I cannot work!
>> >> The yesterday call-traces could be indeed a different issue (I am
>> >> currently testing with the 2 patches from block-tree [1]).
>> >>
>> >> Now, I am building a new linux-next kernel with CONFIG_TREE_RCU=y as
>> >> recommended in Documentation/RCU/stallwarn.txt file.
>> >
>> > You had CONFIG_TREE_PREEMPT_RCU=y earlier? ÂTiny RCU does not have
>> > a stall detector.
>> >
>> > Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ÂThanx, Paul
>> >
>> >> - Sedat -
>> >>
>> >> [1] http://lkml.org/lkml/2011/3/25/326
>> >
>>
>> No, and I have here SMP configured.
>> Yesterday's RCU and SMP kernel config settings:
>>
>> # egrep '_RCU|RCU_|_SMP' /boot/config-2.6.38-next20110324-2-686-iniza
>> CONFIG_X86_32_SMP=y
>> CONFIG_TREE_RCU=y
>> # CONFIG_PREEMPT_RCU is not set
>> # CONFIG_RCU_TRACE is not set
>> CONFIG_RCU_FANOUT=32
>> # CONFIG_RCU_FANOUT_EXACT is not set
>> CONFIG_RCU_FAST_NO_HZ=y
>> # CONFIG_TREE_RCU_TRACE is not set
>> CONFIG_USE_GENERIC_SMP_HELPERS=y
>> CONFIG_SMP=y
>> CONFIG_PM_SLEEP_SMP=y
>> CONFIG_HAVE_TEXT_POKE_SMP=y
>> CONFIG_SCSI_SAS_HOST_SMP=y
>> # CONFIG_SPARSE_RCU_POINTER is not set
>> # CONFIG_RCU_TORTURE_TEST is not set
>> # CONFIG_RCU_CPU_STALL_DETECTOR is not set
>>
>> IIRC Tiny RCU and SMP bite each other?
>> So, what do you recommend for an UP processor machine?
>
> If you want RCU stall warnings, or if you are building an SMP kernel, it
> has to be either TREE_RCU or TREE_PREEMPT_RCU. ÂIf you are on UP and don't
> care about RCU stall warnings, then either TINY_RCU or TINY_PREEMPT_RCU
> will work fine.
>
> I just saw your "Now, I am building a new linux-next kernel with
> CONFIG_TREE_RCU=y" and thought that you were hinting that you had
> been running with something other than TREE_RCU.
>

I could suppress RCU STALL warning via sysfs, but the complete system
is just freaky.
With doing a simple tar (without compression!) job, I can't use my webbrowser.

Selecting TINY_RCU means no CONFIG_SMP!
(OK, I can hack the Kconfig dependency to change this.)

I am thinking of distributions, shall they offer another linux-kernel
binary especially for UP machines?
Somehow ridiculuous.

I still haven't get some hints to play with the timeouts, so I tried
CONFIG_RCU_CPU_STALL_TIMEOUT=120 (default according to Kconfig entry
is 60).
Can this really help here. Why?
I had a closer look into my logs, there I saw a max jiffies of
t=780510 (six digits!)

/var/log/syslog.1:Mar 25 18:09:15 tbox kernel: [ 3221.112034] INFO:
rcu_sched_state detected stall on CPU 0 (t=780510 jiffies)

And I asked for the common play between HZ and RCU values in
kernel-config parameters.
Currently, I have CONFIG_HZ_250=y.
Can you enlighten me. please.

I have the impression that even I could disable "old"
CONFIG_RCU_CPU_STALL_DETECTOR value, this stalling here has other
reasons.

BROKEN ACPI? Might be... But what about supporting such systems (with
quirks or whatever)?

- Sedat -

P.S.: I have attached all jiffies values from my today's and
yesterday's syslogs and my last used kernel-config.

>> - Sedat -
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at Âhttp://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at Âhttp://www.tux.org/lkml/
>
/var/log/syslog:Mar 26 00:36:55 tbox kernel: [  589.064031] INFO: rcu_sched_state detected stall on CPU 0 (t=120030 jiffies)
/var/log/syslog:Mar 26 00:42:55 tbox kernel: [  949.184032] INFO: rcu_sched_state detected stall on CPU 0 (t=210060 jiffies)
/var/log/syslog:Mar 26 00:48:55 tbox kernel: [ 1309.304033] INFO: rcu_sched_state detected stall on CPU 0 (t=300090 jiffies)
/var/log/syslog:Mar 26 01:11:09 tbox kernel: [  208.416034] INFO: rcu_sched_state detected stall on CPU 0 (t=30000 jiffies)
/var/log/syslog:Mar 26 01:16:30 tbox kernel: [  154.532013] INFO: rcu_sched_state detected stall on CPU 0 (t=30000 jiffies)
/var/log/syslog.1:Mar 25 10:57:04 tbox kernel: [  157.340021] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies)
/var/log/syslog.1:Mar 25 11:00:04 tbox kernel: [  337.460033] INFO: rcu_sched_state detected stall on CPU 0 (t=60030 jiffies)
/var/log/syslog.1:Mar 25 11:03:05 tbox kernel: [  517.580032] INFO: rcu_sched_state detected stall on CPU 0 (t=105060 jiffies)
/var/log/syslog.1:Mar 25 11:06:05 tbox kernel: [  697.700033] INFO: rcu_sched_state detected stall on CPU 0 (t=150090 jiffies)
/var/log/syslog.1:Mar 25 11:09:05 tbox kernel: [  877.820034] INFO: rcu_sched_state detected stall on CPU 0 (t=195120 jiffies)
/var/log/syslog.1:Mar 25 11:12:05 tbox kernel: [ 1057.940032] INFO: rcu_sched_state detected stall on CPU 0 (t=240150 jiffies)
/var/log/syslog.1:Mar 25 11:15:05 tbox kernel: [ 1238.060029] INFO: rcu_sched_state detected stall on CPU 0 (t=285180 jiffies)
/var/log/syslog.1:Mar 25 11:18:05 tbox kernel: [ 1418.180033] INFO: rcu_sched_state detected stall on CPU 0 (t=330210 jiffies)
/var/log/syslog.1:Mar 25 11:21:05 tbox kernel: [ 1598.300034] INFO: rcu_sched_state detected stall on CPU 0 (t=375240 jiffies)
/var/log/syslog.1:Mar 25 11:24:05 tbox kernel: [ 1778.420018] INFO: rcu_sched_state detected stall on CPU 0 (t=420270 jiffies)
/var/log/syslog.1:Mar 25 11:27:06 tbox kernel: [ 1958.540024] INFO: rcu_sched_state detected stall on CPU 0 (t=465300 jiffies)
/var/log/syslog.1:Mar 25 11:30:06 tbox kernel: [ 2138.660008] INFO: rcu_sched_state detected stall on CPU 0 (t=510330 jiffies)
/var/log/syslog.1:Mar 25 11:33:06 tbox kernel: [ 2318.780033] INFO: rcu_sched_state detected stall on CPU 0 (t=555360 jiffies)
/var/log/syslog.1:Mar 25 13:54:55 tbox kernel: [  273.224044] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies)
/var/log/syslog.1:Mar 25 13:57:56 tbox kernel: [  453.344036] INFO: rcu_sched_state detected stall on CPU 0 (t=60030 jiffies)
/var/log/syslog.1:Mar 25 14:00:56 tbox kernel: [  633.464043] INFO: rcu_sched_state detected stall on CPU 0 (t=105060 jiffies)
/var/log/syslog.1:Mar 25 14:03:56 tbox kernel: [  813.584031] INFO: rcu_sched_state detected stall on CPU 0 (t=150090 jiffies)
/var/log/syslog.1:Mar 25 14:06:56 tbox kernel: [  993.704031] INFO: rcu_sched_state detected stall on CPU 0 (t=195120 jiffies)
/var/log/syslog.1:Mar 25 14:09:56 tbox kernel: [ 1173.824042] INFO: rcu_sched_state detected stall on CPU 0 (t=240150 jiffies)
/var/log/syslog.1:Mar 25 14:12:56 tbox kernel: [ 1353.944020] INFO: rcu_sched_state detected stall on CPU 0 (t=285180 jiffies)
/var/log/syslog.1:Mar 25 14:15:56 tbox kernel: [ 1534.064033] INFO: rcu_sched_state detected stall on CPU 0 (t=330210 jiffies)
/var/log/syslog.1:Mar 25 14:18:56 tbox kernel: [ 1714.184033] INFO: rcu_sched_state detected stall on CPU 0 (t=375240 jiffies)
/var/log/syslog.1:Mar 25 14:21:56 tbox kernel: [ 1894.304038] INFO: rcu_sched_state detected stall on CPU 0 (t=420270 jiffies)
/var/log/syslog.1:Mar 25 14:24:57 tbox kernel: [ 2074.424033] INFO: rcu_sched_state detected stall on CPU 0 (t=465300 jiffies)
/var/log/syslog.1:Mar 25 17:18:13 tbox kernel: [  159.072032] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies)
/var/log/syslog.1:Mar 25 17:21:13 tbox kernel: [  339.192034] INFO: rcu_sched_state detected stall on CPU 0 (t=60030 jiffies)
/var/log/syslog.1:Mar 25 17:24:13 tbox kernel: [  519.312032] INFO: rcu_sched_state detected stall on CPU 0 (t=105060 jiffies)
/var/log/syslog.1:Mar 25 17:27:13 tbox kernel: [  699.432033] INFO: rcu_sched_state detected stall on CPU 0 (t=150090 jiffies)
/var/log/syslog.1:Mar 25 17:30:14 tbox kernel: [  879.552031] INFO: rcu_sched_state detected stall on CPU 0 (t=195120 jiffies)
/var/log/syslog.1:Mar 25 17:33:14 tbox kernel: [ 1059.672035] INFO: rcu_sched_state detected stall on CPU 0 (t=240150 jiffies)
/var/log/syslog.1:Mar 25 17:36:14 tbox kernel: [ 1239.792026] INFO: rcu_sched_state detected stall on CPU 0 (t=285180 jiffies)
/var/log/syslog.1:Mar 25 17:39:14 tbox kernel: [ 1419.912036] INFO: rcu_sched_state detected stall on CPU 0 (t=330210 jiffies)
/var/log/syslog.1:Mar 25 17:42:14 tbox kernel: [ 1600.032035] INFO: rcu_sched_state detected stall on CPU 0 (t=375240 jiffies)
/var/log/syslog.1:Mar 25 17:45:14 tbox kernel: [ 1780.152033] INFO: rcu_sched_state detected stall on CPU 0 (t=420270 jiffies)
/var/log/syslog.1:Mar 25 17:48:14 tbox kernel: [ 1960.272034] INFO: rcu_sched_state detected stall on CPU 0 (t=465300 jiffies)
/var/log/syslog.1:Mar 25 17:51:14 tbox kernel: [ 2140.392012] INFO: rcu_sched_state detected stall on CPU 0 (t=510330 jiffies)
/var/log/syslog.1:Mar 25 17:54:15 tbox kernel: [ 2320.512031] INFO: rcu_sched_state detected stall on CPU 0 (t=555360 jiffies)
/var/log/syslog.1:Mar 25 17:57:15 tbox kernel: [ 2500.632036] INFO: rcu_sched_state detected stall on CPU 0 (t=600390 jiffies)
/var/log/syslog.1:Mar 25 18:00:15 tbox kernel: [ 2680.751704] INFO: rcu_sched_state detected stall on CPU 0 (t=645420 jiffies)
/var/log/syslog.1:Mar 25 18:03:15 tbox kernel: [ 2860.872032] INFO: rcu_sched_state detected stall on CPU 0 (t=690450 jiffies)
/var/log/syslog.1:Mar 25 18:06:15 tbox kernel: [ 3040.992034] INFO: rcu_sched_state detected stall on CPU 0 (t=735480 jiffies)
/var/log/syslog.1:Mar 25 18:09:15 tbox kernel: [ 3221.112034] INFO: rcu_sched_state detected stall on CPU 0 (t=780510 jiffies)
/var/log/syslog.1:Mar 25 20:37:17 tbox kernel: [  162.424039] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies)
/var/log/syslog.1:Mar 25 20:40:17 tbox kernel: [  342.544034] INFO: rcu_sched_state detected stall on CPU 0 (t=60030 jiffies)
/var/log/syslog.1:Mar 25 20:43:17 tbox kernel: [  522.664036] INFO: rcu_sched_state detected stall on CPU 0 (t=105060 jiffies)
/var/log/syslog.1:Mar 25 20:46:17 tbox kernel: [  702.784032] INFO: rcu_sched_state detected stall on CPU 0 (t=150090 jiffies)
/var/log/syslog.1:Mar 25 20:49:17 tbox kernel: [  882.904036] INFO: rcu_sched_state detected stall on CPU 0 (t=195120 jiffies)
/var/log/syslog.1:Mar 25 20:52:17 tbox kernel: [ 1063.024052] INFO: rcu_sched_state detected stall on CPU 0 (t=240150 jiffies)
/var/log/syslog.1:Mar 25 20:55:17 tbox kernel: [ 1243.144034] INFO: rcu_sched_state detected stall on CPU 0 (t=285180 jiffies)
/var/log/syslog.1:Mar 25 20:58:17 tbox kernel: [ 1423.264034] INFO: rcu_sched_state detected stall on CPU 0 (t=330210 jiffies)
/var/log/syslog.1:Mar 25 21:01:18 tbox kernel: [ 1603.384032] INFO: rcu_sched_state detected stall on CPU 0 (t=375240 jiffies)
/var/log/syslog.1:Mar 25 21:04:18 tbox kernel: [ 1783.504018] INFO: rcu_sched_state detected stall on CPU 0 (t=420270 jiffies)
/var/log/syslog.1:Mar 25 21:07:18 tbox kernel: [ 1963.624034] INFO: rcu_sched_state detected stall on CPU 0 (t=465300 jiffies)
/var/log/syslog.1:Mar 25 21:10:19 tbox kernel: [ 2143.744028] INFO: rcu_sched_state detected stall on CPU 0 (t=510330 jiffies)
/var/log/syslog.1:Mar 26 00:30:55 tbox kernel: [  228.944029] INFO: rcu_sched_state detected stall on CPU 0 (t=30000 jiffies)

Attachment: config-2.6.38-next20110325-5-686-iniza
Description: Binary data