[PATCH] mfd: call disable_irq()/enable_irq() in suspend/resume

[wni]

From: Wei Ni <wni@xxxxxxxxxx>

When use rtc tps6586x wakealarm to suspend/resume system,
it will show a lot error messages:
"tps6586x 4-0034: failed to read interrupt status
tps6586x 4-0034: failed reading from 0xb5"
After resume, the system will call the mfd tps6586x driver's interrupt handle
tps6586x_irq(). This handle will read tps6586x interrupt status (0xb5), but at
that time the i2c driver didn't resume yet, so the reading will be failed.
I call the disble_irq in the suspend, and enable_irq in the resume, which will
delay the delivery of the irq until the i2c driver has been resumed.

Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
---
 drivers/mfd/tps6586x.c |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index b600808..1842b98 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -569,6 +569,20 @@ static const struct i2c_device_id tps6586x_id_table[] = {
 };
 MODULE_DEVICE_TABLE(i2c, tps6586x_id_table);
 
+#ifdef CONFIG_PM
+static int tps6586x_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	disable_irq(client->irq);
+	return 0;
+}
+
+static int tps6586x_resume(struct i2c_client *client)
+{
+	enable_irq(client->irq);
+	return 0;
+}
+#endif
+
 static struct i2c_driver tps6586x_driver = {
 	.driver	= {
 		.name	= "tps6586x",
@@ -577,6 +591,10 @@ static struct i2c_driver tps6586x_driver = {
 	.probe		= tps6586x_i2c_probe,
 	.remove		= __devexit_p(tps6586x_i2c_remove),
 	.id_table	= tps6586x_id_table,
+#ifdef CONFIG_PM
+	.suspend	= tps6586x_suspend,
+	.resume		= tps6586x_resume,
+#endif
 };
 
 static int __init tps6586x_init(void)
-- 
1.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/