[PATCH 04/18] gma500: Add moorestown config structures
From: Alan Cox
Date: Wed Mar 30 2011 - 05:18:27 EST
We have a set of firmware passed descriptors and things we need to grovel
through for video configuration. This differs from the setup for the PC
style Poulsbo hardware.
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
drivers/staging/gma500/psb_drv.h | 188 ++++++++++++++++++++++++++++++++++++++
1 files changed, 188 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/gma500/psb_drv.h b/drivers/staging/gma500/psb_drv.h
index 6de1c8a..b7b21ae 100644
--- a/drivers/staging/gma500/psb_drv.h
+++ b/drivers/staging/gma500/psb_drv.h
@@ -332,6 +332,194 @@ struct psb_video_ctx {
/* todo: more context specific data for multi-context support */
};
+struct mrst_vbt {
+ s8 signature[4]; /*4 bytes,"$GCT" */
+ u8 revision;
+ u8 size;
+ u8 checksum;
+ void *mrst_gct;
+} __attribute__ ((packed));
+
+struct mrst_timing_info {
+ u16 pixel_clock;
+ u8 hactive_lo;
+ u8 hblank_lo;
+ u8 hblank_hi:4;
+ u8 hactive_hi:4;
+ u8 vactive_lo;
+ u8 vblank_lo;
+ u8 vblank_hi:4;
+ u8 vactive_hi:4;
+ u8 hsync_offset_lo;
+ u8 hsync_pulse_width_lo;
+ u8 vsync_pulse_width_lo:4;
+ u8 vsync_offset_lo:4;
+ u8 vsync_pulse_width_hi:2;
+ u8 vsync_offset_hi:2;
+ u8 hsync_pulse_width_hi:2;
+ u8 hsync_offset_hi:2;
+ u8 width_mm_lo;
+ u8 height_mm_lo;
+ u8 height_mm_hi:4;
+ u8 width_mm_hi:4;
+ u8 hborder;
+ u8 vborder;
+ u8 unknown0:1;
+ u8 hsync_positive:1;
+ u8 vsync_positive:1;
+ u8 separate_sync:2;
+ u8 stereo:1;
+ u8 unknown6:1;
+ u8 interlaced:1;
+} __attribute__((packed));
+
+struct gct_r10_timing_info {
+ u16 pixel_clock;
+ u32 hactive_lo:8;
+ u32 hactive_hi:4;
+ u32 hblank_lo:8;
+ u32 hblank_hi:4;
+ u32 hsync_offset_lo:8;
+ u16 hsync_offset_hi:2;
+ u16 hsync_pulse_width_lo:8;
+ u16 hsync_pulse_width_hi:2;
+ u16 hsync_positive:1;
+ u16 rsvd_1:3;
+ u8 vactive_lo:8;
+ u16 vactive_hi:4;
+ u16 vblank_lo:8;
+ u16 vblank_hi:4;
+ u16 vsync_offset_lo:4;
+ u16 vsync_offset_hi:2;
+ u16 vsync_pulse_width_lo:4;
+ u16 vsync_pulse_width_hi:2;
+ u16 vsync_positive:1;
+ u16 rsvd_2:3;
+} __attribute__((packed));
+
+struct mrst_panel_descriptor_v1 {
+ u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
+ /* 0x61190 if MIPI */
+ u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
+ u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+ u32 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */
+ /* Register 0x61210 */
+ struct mrst_timing_info DTD;/*18 bytes, Standard definition */
+ u16 Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */
+ /* Bit 0, Frequency, 15 bits,0 - 32767Hz */
+ /* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */
+ u16 Panel_MIPI_Display_Descriptor;
+ /*16 bits, Defined as follows: */
+ /* if MIPI, 0x0000 if LVDS */
+ /* Bit 0, Type, 2 bits, */
+ /* 0: Type-1, */
+ /* 1: Type-2, */
+ /* 2: Type-3, */
+ /* 3: Type-4 */
+ /* Bit 2, Pixel Format, 4 bits */
+ /* Bit0: 16bpp (not supported in LNC), */
+ /* Bit1: 18bpp loosely packed, */
+ /* Bit2: 18bpp packed, */
+ /* Bit3: 24bpp */
+ /* Bit 6, Reserved, 2 bits, 00b */
+ /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
+ /* Bit 14, Reserved, 2 bits, 00b */
+} __attribute__ ((packed));
+
+struct mrst_panel_descriptor_v2 {
+ u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
+ /* 0x61190 if MIPI */
+ u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
+ u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+ u8 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */
+ /* Register 0x61210 */
+ struct mrst_timing_info DTD;/*18 bytes, Standard definition */
+ u16 Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/
+ /*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/
+ u8 Panel_Initial_Brightness;/* [7:0] 0 - 100% */
+ /*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/
+ u16 Panel_MIPI_Display_Descriptor;
+ /*16 bits, Defined as follows: */
+ /* if MIPI, 0x0000 if LVDS */
+ /* Bit 0, Type, 2 bits, */
+ /* 0: Type-1, */
+ /* 1: Type-2, */
+ /* 2: Type-3, */
+ /* 3: Type-4 */
+ /* Bit 2, Pixel Format, 4 bits */
+ /* Bit0: 16bpp (not supported in LNC), */
+ /* Bit1: 18bpp loosely packed, */
+ /* Bit2: 18bpp packed, */
+ /* Bit3: 24bpp */
+ /* Bit 6, Reserved, 2 bits, 00b */
+ /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
+ /* Bit 14, Reserved, 2 bits, 00b */
+} __attribute__ ((packed));
+
+union mrst_panel_rx {
+ struct{
+ u16 NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/
+ /* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */
+ u16 MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */
+ /*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/
+ u16 SupportedVideoTransferMode:2; /*0: Non-burst only */
+ /* 1: Burst and non-burst */
+ /* 2/3: Reserved */
+ u16 HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/
+ u16 DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/
+ u16 ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/
+ u16 BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */
+ u16 Rsvd:5;/*5 bits,00000b */
+ } panelrx;
+ u16 panel_receiver;
+} __attribute__ ((packed));
+
+struct mrst_gct_v1 {
+ union{ /*8 bits,Defined as follows: */
+ struct {
+ u8 PanelType:4; /*4 bits, Bit field for panels*/
+ /* 0 - 3: 0 = LVDS, 1 = MIPI*/
+ /*2 bits,Specifies which of the*/
+ u8 BootPanelIndex:2;
+ /* 4 panels to use by default*/
+ u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
+ /* the 4 MIPI DSI receivers to use*/
+ } PD;
+ u8 PanelDescriptor;
+ };
+ struct mrst_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/
+ union mrst_panel_rx panelrx[4]; /* panel receivers*/
+} __attribute__ ((packed));
+
+struct mrst_gct_v2 {
+ union{ /*8 bits,Defined as follows: */
+ struct {
+ u8 PanelType:4; /*4 bits, Bit field for panels*/
+ /* 0 - 3: 0 = LVDS, 1 = MIPI*/
+ /*2 bits,Specifies which of the*/
+ u8 BootPanelIndex:2;
+ /* 4 panels to use by default*/
+ u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
+ /* the 4 MIPI DSI receivers to use*/
+ } PD;
+ u8 PanelDescriptor;
+ };
+ struct mrst_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/
+ union mrst_panel_rx panelrx[4]; /* panel receivers*/
+} __attribute__ ((packed));
+
+struct mrst_gct_data {
+ u8 bpi; /* boot panel index, number of panel used during boot */
+ u8 pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */
+ struct mrst_timing_info DTD; /* timing info for the selected panel */
+ u32 Panel_Port_Control;
+ u32 PP_On_Sequencing;/*1 dword,Register 0x61208,*/
+ u32 PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+ u32 PP_Cycle_Delay;
+ u16 Panel_Backlight_Inverter_Descriptor;
+ u16 Panel_MIPI_Display_Descriptor;
+} __attribute__ ((packed));
+
#define MODE_SETTING_IN_CRTC 0x1
#define MODE_SETTING_IN_ENCODER 0x2
#define MODE_SETTING_ON_GOING 0x3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/