[PATCH 2/2] msm: board-8960: Add support for pm8921-regulator
From: David Collins
Date: Wed Mar 30 2011 - 18:17:56 EST
Add board-msm8960-regulator.c to contain pm8921-regulator structure
declarations. NULL consumer names in the regulator_consumer_supply
lists are used for debugging and as place holders. They will
eventually be changed to use more appropriate debug device names.
The primary configuration table msm_pm8921_regulator_pdata specifies
the following characteristics for each regulator: if it is always on,
if it should have its pull down set when disabled, its min and max
voltage constraints, its supply regulator, and its pin control pins.
Signed-off-by: David Collins <collinsd@xxxxxxxxxxxxxx>
---
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/board-msm8960-regulator.c | 303 +++++++++++++++++++++++++++
arch/arm/mach-msm/board-msm8960.c | 6 +
arch/arm/mach-msm/board-msm8960.h | 23 ++
4 files changed, 333 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/board-msm8960-regulator.c
create mode 100644 arch/arm/mach-msm/board-msm8960.h
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index a4f55ec..c590fa9 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
+obj-$(CONFIG_ARCH_MSM8960) += board-msm8960-regulator.o
obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-v1.o gpiomux.o
diff --git a/arch/arm/mach-msm/board-msm8960-regulator.c b/arch/arm/mach-msm/board-msm8960-regulator.c
new file mode 100644
index 0000000..0d1f5ab
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8960-regulator.c
@@ -0,0 +1,303 @@
+/*
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/regulator/pm8921-regulator.h>
+
+#include "board-msm8960.h"
+
+#define VREG_CONSUMERS(_id) \
+ static struct regulator_consumer_supply \
+ pm8921_vreg_consumers_##_id[] __devinitdata
+
+/*
+ * Consumer specific regulator names:
+ * regulator name consumer dev_name
+ */
+VREG_CONSUMERS(L1) = {
+ REGULATOR_SUPPLY("8921_l1", NULL),
+};
+VREG_CONSUMERS(L2) = {
+ REGULATOR_SUPPLY("8921_l2", NULL),
+};
+VREG_CONSUMERS(L3) = {
+ REGULATOR_SUPPLY("8921_l3", NULL),
+ REGULATOR_SUPPLY("HSUSB_3p3", "msm_otg"),
+};
+VREG_CONSUMERS(L4) = {
+ REGULATOR_SUPPLY("8921_l4", NULL),
+ REGULATOR_SUPPLY("HSUSB_1p8", "msm_otg"),
+};
+VREG_CONSUMERS(L5) = {
+ REGULATOR_SUPPLY("8921_l5", NULL),
+ REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.1"),
+};
+VREG_CONSUMERS(L6) = {
+ REGULATOR_SUPPLY("8921_l6", NULL),
+ REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.3"),
+};
+VREG_CONSUMERS(L7) = {
+ REGULATOR_SUPPLY("8921_l7", NULL),
+ REGULATOR_SUPPLY("sdc_vddp", "msm_sdcc.3"),
+};
+VREG_CONSUMERS(L8) = {
+ REGULATOR_SUPPLY("8921_l8", NULL),
+};
+VREG_CONSUMERS(L9) = {
+ REGULATOR_SUPPLY("8921_l9", NULL),
+};
+VREG_CONSUMERS(L10) = {
+ REGULATOR_SUPPLY("8921_l10", NULL),
+};
+VREG_CONSUMERS(L11) = {
+ REGULATOR_SUPPLY("8921_l11", NULL),
+};
+VREG_CONSUMERS(L12) = {
+ REGULATOR_SUPPLY("8921_l12", NULL),
+};
+VREG_CONSUMERS(L14) = {
+ REGULATOR_SUPPLY("8921_l14", NULL),
+};
+VREG_CONSUMERS(L15) = {
+ REGULATOR_SUPPLY("8921_l15", NULL),
+};
+VREG_CONSUMERS(L16) = {
+ REGULATOR_SUPPLY("8921_l16", NULL),
+};
+VREG_CONSUMERS(L17) = {
+ REGULATOR_SUPPLY("8921_l17", NULL),
+};
+VREG_CONSUMERS(L18) = {
+ REGULATOR_SUPPLY("8921_l18", NULL),
+};
+VREG_CONSUMERS(L21) = {
+ REGULATOR_SUPPLY("8921_l21", NULL),
+};
+VREG_CONSUMERS(L22) = {
+ REGULATOR_SUPPLY("8921_l22", NULL),
+};
+VREG_CONSUMERS(L23) = {
+ REGULATOR_SUPPLY("8921_l23", NULL),
+};
+VREG_CONSUMERS(L24) = {
+ REGULATOR_SUPPLY("8921_l24", NULL),
+};
+VREG_CONSUMERS(L25) = {
+ REGULATOR_SUPPLY("8921_l25", NULL),
+};
+VREG_CONSUMERS(L26) = {
+ REGULATOR_SUPPLY("8921_l26", NULL),
+};
+VREG_CONSUMERS(L27) = {
+ REGULATOR_SUPPLY("8921_l27", NULL),
+};
+VREG_CONSUMERS(L28) = {
+ REGULATOR_SUPPLY("8921_l28", NULL),
+};
+VREG_CONSUMERS(L29) = {
+ REGULATOR_SUPPLY("8921_l29", NULL),
+};
+VREG_CONSUMERS(S1) = {
+ REGULATOR_SUPPLY("8921_s1", NULL),
+};
+VREG_CONSUMERS(S2) = {
+ REGULATOR_SUPPLY("8921_s2", NULL),
+};
+VREG_CONSUMERS(S3) = {
+ REGULATOR_SUPPLY("8921_s3", NULL),
+ REGULATOR_SUPPLY("HSUSB_VDDCX", "msm_otg"),
+};
+VREG_CONSUMERS(S4) = {
+ REGULATOR_SUPPLY("8921_s4", NULL),
+ REGULATOR_SUPPLY("sdc_vccq", "msm_sdcc.1"),
+};
+VREG_CONSUMERS(S5) = {
+ REGULATOR_SUPPLY("8921_s5", NULL),
+};
+VREG_CONSUMERS(S6) = {
+ REGULATOR_SUPPLY("8921_s6", NULL),
+};
+VREG_CONSUMERS(S7) = {
+ REGULATOR_SUPPLY("8921_s7", NULL),
+};
+VREG_CONSUMERS(S8) = {
+ REGULATOR_SUPPLY("8921_s8", NULL),
+};
+VREG_CONSUMERS(LVS1) = {
+ REGULATOR_SUPPLY("8921_lvs1", NULL),
+ REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.4"),
+};
+VREG_CONSUMERS(LVS2) = {
+ REGULATOR_SUPPLY("8921_lvs2", NULL),
+};
+VREG_CONSUMERS(LVS3) = {
+ REGULATOR_SUPPLY("8921_lvs3", NULL),
+};
+VREG_CONSUMERS(LVS4) = {
+ REGULATOR_SUPPLY("8921_lvs4", NULL),
+};
+VREG_CONSUMERS(LVS5) = {
+ REGULATOR_SUPPLY("8921_lvs5", NULL),
+};
+VREG_CONSUMERS(LVS6) = {
+ REGULATOR_SUPPLY("8921_lvs6", NULL),
+};
+VREG_CONSUMERS(LVS7) = {
+ REGULATOR_SUPPLY("8921_lvs7", NULL),
+};
+VREG_CONSUMERS(USB_OTG) = {
+ REGULATOR_SUPPLY("8921_usb_otg", NULL),
+};
+VREG_CONSUMERS(HDMI_MVS) = {
+ REGULATOR_SUPPLY("8921_hdmi_mvs", NULL),
+};
+VREG_CONSUMERS(NCP) = {
+ REGULATOR_SUPPLY("8921_ncp", NULL),
+};
+
+#define PM8921_VREG_INIT(_id, _min_uV, _max_uV, _modes, _ops, _apply_uV, \
+ _pull_down, _pin_ctrl, _pin_fn, _always_on, \
+ _supply_regulator) \
+ { \
+ .init_data = { \
+ .constraints = { \
+ .valid_modes_mask = _modes, \
+ .valid_ops_mask = _ops, \
+ .min_uV = _min_uV, \
+ .max_uV = _max_uV, \
+ .input_uV = _max_uV, \
+ .apply_uV = _apply_uV, \
+ .always_on = _always_on, \
+ }, \
+ .num_consumer_supplies = \
+ ARRAY_SIZE(pm8921_vreg_consumers_##_id), \
+ .consumer_supplies = pm8921_vreg_consumers_##_id, \
+ .supply_regulator = _supply_regulator, \
+ }, \
+ .id = PM8921_VREG_ID_##_id, \
+ .pull_down_enable = _pull_down, \
+ .pin_ctrl = _pin_ctrl, \
+ .pin_fn = _pin_fn, \
+ }
+
+#define PM8921_VREG_INIT_LDO(_id, _always_on, _pull_down, _min_uV, _max_uV, \
+ _supply_regulator, _pin_ctrl) \
+ PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_FAST | \
+ REGULATOR_MODE_NORMAL | REGULATOR_MODE_IDLE | \
+ REGULATOR_MODE_STANDBY, REGULATOR_CHANGE_VOLTAGE | \
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+ REGULATOR_CHANGE_DRMS, 0, _pull_down, _pin_ctrl, \
+ PM8921_VREG_PIN_FN_ENABLE, _always_on, _supply_regulator)
+
+#define PM8921_VREG_INIT_NLDO1200(_id, _always_on, _pull_down, _min_uV, \
+ _max_uV, _supply_regulator) \
+ PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_FAST | \
+ REGULATOR_MODE_STANDBY, REGULATOR_CHANGE_VOLTAGE | \
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+ REGULATOR_CHANGE_DRMS, 0, _pull_down, \
+ PM8921_VREG_PIN_CTRL_NONE, PM8921_VREG_PIN_FN_ENABLE, \
+ _always_on, _supply_regulator)
+
+#define PM8921_VREG_INIT_SMPS(_id, _always_on, _pull_down, _min_uV, _max_uV, \
+ _supply_regulator, _pin_ctrl) \
+ PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_FAST | \
+ REGULATOR_MODE_NORMAL | REGULATOR_MODE_IDLE | \
+ REGULATOR_MODE_STANDBY, REGULATOR_CHANGE_VOLTAGE | \
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+ REGULATOR_CHANGE_DRMS, 0, _pull_down, _pin_ctrl, \
+ PM8921_VREG_PIN_FN_ENABLE, _always_on, _supply_regulator)
+
+#define PM8921_VREG_INIT_FTSMPS(_id, _always_on, _pull_down, _min_uV, _max_uV, \
+ _supply_regulator) \
+ PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_FAST | \
+ REGULATOR_MODE_STANDBY, REGULATOR_CHANGE_VOLTAGE | \
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+ REGULATOR_CHANGE_DRMS, 0, _pull_down, \
+ PM8921_VREG_PIN_CTRL_NONE, PM8921_VREG_PIN_FN_ENABLE, \
+ _always_on, _supply_regulator)
+
+#define PM8921_VREG_INIT_VS(_id, _always_on, _pull_down, _supply_regulator, \
+ _pin_ctrl) \
+ PM8921_VREG_INIT(_id, 0, 0, REGULATOR_MODE_NORMAL | \
+ REGULATOR_MODE_IDLE, REGULATOR_CHANGE_STATUS | \
+ REGULATOR_CHANGE_MODE, 0, _pull_down, _pin_ctrl, \
+ PM8921_VREG_PIN_FN_ENABLE, _always_on, _supply_regulator)
+
+#define PM8921_VREG_INIT_VS300(_id, _always_on, _pull_down, _supply_regulator) \
+ PM8921_VREG_INIT(_id, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, _pull_down, \
+ PM8921_VREG_PIN_CTRL_NONE, PM8921_VREG_PIN_FN_ENABLE, \
+ _always_on, _supply_regulator)
+
+#define PM8921_VREG_INIT_NCP(_id, _always_on, _pull_down, _min_uV, _max_uV, \
+ _supply_regulator) \
+ PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL | \
+ REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+ REGULATOR_CHANGE_DRMS, 0, _pull_down, \
+ PM8921_VREG_PIN_CTRL_NONE, PM8921_VREG_PIN_FN_ENABLE, \
+ _always_on, _supply_regulator)
+
+/* Regulator constraints */
+struct pm8921_regulator_platform_data
+msm_pm8921_regulator_pdata[] __devinitdata = {
+ PM8921_VREG_INIT_SMPS(S1, 0, 0, 1225000, 1225000, NULL, 0),
+ PM8921_VREG_INIT_SMPS(S2, 0, 0, 1300000, 1300000, NULL, 0),
+ PM8921_VREG_INIT_SMPS(S3, 0, 0, 1050000, 1050000, NULL, 0),
+ PM8921_VREG_INIT_SMPS(S4, 0, 0, 1800000, 1800000, NULL, 0),
+ PM8921_VREG_INIT_FTSMPS(S5, 0, 0, 1050000, 1050000, NULL),
+ PM8921_VREG_INIT_FTSMPS(S6, 0, 0, 1050000, 1050000, NULL),
+ PM8921_VREG_INIT_SMPS(S7, 0, 0, 1150000, 1150000, NULL, 0),
+ PM8921_VREG_INIT_SMPS(S8, 0, 0, 2200000, 2200000, NULL, 0),
+
+ PM8921_VREG_INIT_LDO(L1, 0, 0, 1050000, 1050000, "8921_s4", 0),
+ PM8921_VREG_INIT_LDO(L2, 0, 0, 1200000, 1200000, "8921_s4", 0),
+ PM8921_VREG_INIT_LDO(L3, 0, 0, 3075000, 3075000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L4, 0, 0, 1800000, 1800000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L5, 0, 0, 2950000, 2950000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L6, 0, 0, 2950000, 2950000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L7, 0, 0, 2950000, 2950000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L8, 0, 0, 3000000, 3000000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L9, 0, 0, 2850000, 2850000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L10, 0, 0, 2900000, 2900000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L11, 0, 0, 2850000, 2850000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L12, 0, 0, 1200000, 1200000, "8921_s4", 0),
+ PM8921_VREG_INIT_LDO(L14, 0, 0, 1800000, 1800000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L15, 0, 0, 1800000, 2950000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L16, 0, 0, 3000000, 3000000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L17, 0, 0, 1800000, 2950000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L18, 0, 0, 1300000, 1300000, "8921_s4", 0),
+ PM8921_VREG_INIT_LDO(L21, 0, 0, 1900000, 1900000, "8921_s8", 0),
+ PM8921_VREG_INIT_LDO(L22, 0, 0, 2750000, 2750000, NULL, 0),
+ PM8921_VREG_INIT_LDO(L23, 0, 0, 1800000, 1800000, "8921_s8", 0),
+ PM8921_VREG_INIT_NLDO1200(L24, 0, 0, 1050000, 1050000, "8921_s1"),
+ PM8921_VREG_INIT_NLDO1200(L25, 0, 0, 1225000, 1225000, "8921_s1"),
+ PM8921_VREG_INIT_NLDO1200(L26, 0, 0, 1050000, 1050000, "8921_s7"),
+ PM8921_VREG_INIT_NLDO1200(L27, 0, 0, 1050000, 1050000, "8921_s7"),
+ PM8921_VREG_INIT_NLDO1200(L28, 0, 0, 1050000, 1050000, "8921_s7"),
+ PM8921_VREG_INIT_LDO(L29, 0, 0, 2050000, 2100000, "8921_s8", 0),
+
+ PM8921_VREG_INIT_VS(LVS1, 0, 0, "8921_s4", 0),
+ PM8921_VREG_INIT_VS300(LVS2, 0, 0, "8921_s1"),
+ PM8921_VREG_INIT_VS(LVS3, 0, 0, "8921_s4", 0),
+ PM8921_VREG_INIT_VS(LVS4, 0, 0, "8921_s4", 0),
+ PM8921_VREG_INIT_VS(LVS5, 0, 0, "8921_s4", 0),
+ PM8921_VREG_INIT_VS(LVS6, 0, 0, "8921_s4", 0),
+ PM8921_VREG_INIT_VS(LVS7, 0, 0, "8921_s4", 0),
+
+ PM8921_VREG_INIT_VS300(USB_OTG, 0, 0, NULL),
+ PM8921_VREG_INIT_VS300(HDMI_MVS, 0, 0, NULL),
+
+ PM8921_VREG_INIT_NCP(NCP, 0, 0, 1800000, 1800000, "8921_l6"),
+};
+
+int msm_pm8921_regulator_pdata_len __devinitdata =
+ ARRAY_SIZE(msm_pm8921_regulator_pdata);
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index 1c90789..5cd2c79 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -27,6 +27,7 @@
#include <mach/irqs.h>
#include "devices.h"
+#include "board-msm8960.h"
/* Macros assume PMIC GPIOs and MPPs start at 1 */
#define PM8921_GPIO_BASE NR_GPIO_IRQS
@@ -91,6 +92,7 @@ static struct pm8921_platform_data pm8921_platform_data __devinitdata = {
.irq_pdata = &pm8xxx_irq_pdata,
.gpio_pdata = &pm8xxx_gpio_pdata,
.mpp_pdata = &pm8xxx_mpp_pdata,
+ .regulator_pdatas = msm_pm8921_regulator_pdata,
};
static struct msm_ssbi_platform_data msm8960_ssbi_pm8921_pdata __initdata = {
@@ -107,6 +109,8 @@ static void __init msm8960_sim_init(void)
msm8960_device_ssbi_pm8921.dev.platform_data =
&msm8960_ssbi_pm8921_pdata;
+ pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len;
+
platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices));
}
@@ -116,6 +120,8 @@ static void __init msm8960_rumi3_init(void)
msm8960_device_ssbi_pm8921.dev.platform_data =
&msm8960_ssbi_pm8921_pdata;
+ pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len;
+
platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
}
diff --git a/arch/arm/mach-msm/board-msm8960.h b/arch/arm/mach-msm/board-msm8960.h
new file mode 100644
index 0000000..040b033
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8960.h
@@ -0,0 +1,23 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_MSM8960_H
+#define __ARCH_ARM_MACH_MSM_BOARD_MSM8960_H
+
+#include <linux/mfd/pm8xxx/pm8921.h>
+
+extern struct pm8921_regulator_platform_data
+ msm_pm8921_regulator_pdata[] __devinitdata;
+
+extern int msm_pm8921_regulator_pdata_len __devinitdata;
+
+#endif
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/