[PATCH 1/3] ARM: Xilinx: add timer and on chip memory support for SMP
From: John Linn
Date: Sun Apr 03 2011 - 17:01:03 EST
These changes are required to support SMP.
This includes an update so that the non-local timer is set
to run on the 1st CPU, the addition of local timer support
and support for on chip memory.
Signed-off-by: John Linn <john.linn@xxxxxxxxxx>
---
arch/arm/mach-xilinx/common.c | 16 ++++++++++-
arch/arm/mach-xilinx/include/mach/irqs.h | 1 +
arch/arm/mach-xilinx/include/mach/xilinx_soc.h | 20 +++++++++++++
arch/arm/mach-xilinx/localtimer.c | 36 ++++++++++++++++++++++++
arch/arm/mach-xilinx/timer.c | 4 +-
5 files changed, 74 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-xilinx/localtimer.c
diff --git a/arch/arm/mach-xilinx/common.c b/arch/arm/mach-xilinx/common.c
index 83b549d..2695b39 100644
--- a/arch/arm/mach-xilinx/common.c
+++ b/arch/arm/mach-xilinx/common.c
@@ -101,7 +101,21 @@ static struct map_desc io_desc[] __initdata = {
.type = MT_DEVICE,
},
#endif
-
+ /* create a mapping for the OCM (256K) leaving a hole for the
+ * interrupt vectors which are handled in the kernel
+ */
+ {
+ .virtual = OCM_LOW_VIRT,
+ .pfn = __phys_to_pfn(OCM_LOW_PHYS),
+ .length = (192 * SZ_1K),
+ .type = MT_DEVICE_CACHED,
+ },
+ {
+ .virtual = OCM_HIGH_VIRT,
+ .pfn = __phys_to_pfn(OCM_HIGH_PHYS),
+ .length = (60 * SZ_1K),
+ .type = MT_DEVICE,
+ },
};
/**
diff --git a/arch/arm/mach-xilinx/include/mach/irqs.h b/arch/arm/mach-xilinx/include/mach/irqs.h
index 47a8162..8c41b22 100644
--- a/arch/arm/mach-xilinx/include/mach/irqs.h
+++ b/arch/arm/mach-xilinx/include/mach/irqs.h
@@ -22,6 +22,7 @@
* GIC Interrupts
*/
+#define IRQ_SCU_CPU_TIMER 29
#define IRQ_GIC_SPI_START 32
#define IRQ_TIMERCOUNTER0 42
#define IRQ_UART0 59
diff --git a/arch/arm/mach-xilinx/include/mach/xilinx_soc.h b/arch/arm/mach-xilinx/include/mach/xilinx_soc.h
index d181c5c..a55a46c 100644
--- a/arch/arm/mach-xilinx/include/mach/xilinx_soc.h
+++ b/arch/arm/mach-xilinx/include/mach/xilinx_soc.h
@@ -31,13 +31,33 @@
#define SCU_PERIPH_PHYS 0xF8F00000
#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS
+#define OCM_LOW_PHYS 0xFFFC0000
+#define OCM_LOW_VIRT OCM_LOW_PHYS
+
+#define OCM_HIGH_PHYS 0xFFFF1000
+#define OCM_HIGH_VIRT OCM_HIGH_PHYS
+
/* The following are intended for the devices that are mapped early */
#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100)
+#define SCU_CPU_TIMER_BASE (SCU_PERIPH_BASE + 0x600)
#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000)
#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT)
+#define OCM_LOW_BASE IOMEM(OCM_LOW_VIRT)
+#define OCM_HIGH_BASE IOMEM(OCM_HIGH_VIRT)
+
+/* There are a couple ram addresses needed for communication between the boot
+ * loader software and the linux kernel with multiple cpus in the kernel (SMP).
+ * The memory addresses are in the high on-chip RAM and these addresses are
+ * mapped flat (virtual = physical). The memory must be mapped early and
+ * non-cached.
+ */
+
+#define BOOT_ADDR_OFFSET 0xEFF0
+#define BOOT_LOCK_OFFSET 0xEFF4
+#define BOOT_LOCK_KEY 0xFACECAFE
/*
* Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
diff --git a/arch/arm/mach-xilinx/localtimer.c b/arch/arm/mach-xilinx/localtimer.c
new file mode 100644
index 0000000..4bd0a0d
--- /dev/null
+++ b/arch/arm/mach-xilinx/localtimer.c
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-xilinx/localtimer.c
+ *
+ * Both cortex-a9 cores have their own timer in it's CPU domain.
+ *
+ * Copyright (C) 2011 Xilinx, Inc.
+ *
+ * This file is based on arch/arm/plat-versatile/localtimer.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <asm/smp_twd.h>
+#include <mach/xilinx_soc.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ twd_base = SCU_CPU_TIMER_BASE;
+
+ evt->irq = IRQ_SCU_CPU_TIMER;
+ twd_timer_setup(evt);
+ return 0;
+}
+
diff --git a/arch/arm/mach-xilinx/timer.c b/arch/arm/mach-xilinx/timer.c
index b2a72f0..65c336a 100644
--- a/arch/arm/mach-xilinx/timer.c
+++ b/arch/arm/mach-xilinx/timer.c
@@ -283,9 +283,9 @@ static void __init xttcpss_timer_init(void)
xttcpss_clockevent.min_delta_ns =
clockevent_delta2ns(1, &xttcpss_clockevent);
- /* Indicate that clock event can be used on any of the CPUs */
+ /* Indicate that clock event is on 1st CPU as SMP boot needs it */
- xttcpss_clockevent.cpumask = cpu_all_mask;
+ xttcpss_clockevent.cpumask = cpumask_of(0);
clockevents_register_device(&xttcpss_clockevent);
}
--
1.5.4.7
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/