Re: [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib

[Linus Walleij]

2011/4/20 Haojian Zhuang <haojian.zhuang@xxxxxxxxx>:

> I have an another question on board initialization. The configuration on pins
> are including drive strength, pull and multiple function.
>
> Since this patch can configure drive strength, pull. Will it be preferred to use
> in board initialization?

I am reusing it (inside the example driver) for drive strength and bias.

Multiple function again is pin/padmuxing.

Even if some people are only muxing pins that can also be used as GPIO,
this is not always the case. We can shunt out the same pins to be used as
I2C or SPI for example, that means this cannot be handled in a GPIO
driver since it has nothing to do with GPIO pins at all.

Thus we need an orthogonal pin/padmux mechanism.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/