[PATCH] clocksource: sh_cmt: Runtime PM support

[Magnus Damm]

From: Magnus Damm <damm@xxxxxxxxxxxxx>

Add Runtime PM support to the CMT driver.

The hardware device is enabled as long as the clocksource
or the clockevent portion of the driver is used.

Signed-off-by: Magnus Damm <damm@xxxxxxxxxxxxx>
---

 Tested on the sh7372 Mackerel board with CMT10.

 drivers/clocksource/sh_cmt.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- 0008/drivers/clocksource/sh_cmt.c
+++ work/drivers/clocksource/sh_cmt.c	2011-04-25 15:01:53.000000000 +0900
@@ -24,6 +24,7 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/pm_runtime.h>
 #include <linux/irq.h>
 #include <linux/err.h>
 #include <linux/clocksource.h>
@@ -152,10 +153,12 @@ static int sh_cmt_enable(struct sh_cmt_p
 {
 	int ret;
 
-	/* enable clock */
+	/* wake up device and enable clock */
+	pm_runtime_get_sync(&p->pdev->dev);
 	ret = clk_enable(p->clk);
 	if (ret) {
 		dev_err(&p->pdev->dev, "cannot enable clock\n");
+		pm_runtime_put_sync(&p->pdev->dev);
 		return ret;
 	}
 
@@ -187,8 +190,9 @@ static void sh_cmt_disable(struct sh_cmt
 	/* disable interrupts in CMT block */
 	sh_cmt_write(p, CMCSR, 0);
 
-	/* stop clock */
+	/* stop clock and mark device as idle */
 	clk_disable(p->clk);
+	pm_runtime_put_sync(&p->pdev->dev);
 }
 
 /* private flags */
@@ -660,6 +664,7 @@ static int __devinit sh_cmt_probe(struct
 
 	if (p) {
 		dev_info(&pdev->dev, "kept as earlytimer\n");
+		pm_runtime_enable(&pdev->dev);
 		return 0;
 	}
 
@@ -674,6 +679,9 @@ static int __devinit sh_cmt_probe(struct
 		kfree(p);
 		platform_set_drvdata(pdev, NULL);
 	}
+
+	if (!is_early_platform_device(pdev))
+		pm_runtime_enable(&pdev->dev);
 	return ret;
 }
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/