[RESEND][PATCH 5/5] arm: omap: usb: global Suspend and resume support of ehci and ohci

From: Keshava Munegowda
Date: Mon May 16 2011 - 05:43:26 EST


From: Keshava Munegowda <Keshava_mgowda@xxxxxx>

The global suspend and resume functions for usbhs core driver
are implemented.These routine are called when the global suspend
and resume occurs. Before calling these functions, the
bus suspend and resume of ehci and ohci drivers are called
from runtime pm.

Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>
---
drivers/mfd/omap-usb-host.c | 103 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 103 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index bd63429..e1bc3b5 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -146,6 +146,10 @@
#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)


+/* USBHS state bits */
+#define OMAP_USBHS_INIT 0
+#define OMAP_USBHS_SUSPEND 4
+
struct usbhs_hcd_omap {
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
@@ -165,6 +169,7 @@ struct usbhs_hcd_omap {
u32 usbhs_rev;
spinlock_t lock;
int count;
+ unsigned long state;
};
/*-------------------------------------------------------------------------*/

@@ -807,6 +812,8 @@ static int usbhs_enable(struct device *dev)
(pdata->ehci_data->reset_gpio_port[1], 1);
}

+ set_bit(OMAP_USBHS_INIT, &omap->state);
+
end_count:
omap->count++;
spin_unlock_irqrestore(&omap->lock, flags);
@@ -895,6 +902,7 @@ static void usbhs_disable(struct device *dev)
}

pm_runtime_put_sync(dev);
+ clear_bit(OMAP_USBHS_INIT, &omap->state);

/* The gpio_free migh sleep; so unlock the spinlock */
spin_unlock_irqrestore(&omap->lock, flags);
@@ -924,10 +932,105 @@ void omap_usbhs_disable(struct device *dev)
}
EXPORT_SYMBOL_GPL(omap_usbhs_disable);

+#ifdef CONFIG_PM
+
+static int usbhs_resume(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+ unsigned long flags = 0;
+
+ dev_dbg(dev, "Resuming TI HSUSB Controller\n");
+
+ if (!pdata) {
+ dev_dbg(dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
+
+ if (!test_bit(OMAP_USBHS_INIT, &omap->state) ||
+ !test_bit(OMAP_USBHS_SUSPEND, &omap->state))
+ goto end_resume;
+
+ pm_runtime_get_sync(dev);
+
+ if (is_omap_usbhs_rev2(omap)) {
+ if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ clk_enable(omap->usbhost_p1_fck);
+ clk_enable(omap->usbtll_p1_fck);
+ }
+ if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ clk_enable(omap->usbhost_p2_fck);
+ clk_enable(omap->usbtll_p2_fck);
+ }
+ clk_enable(omap->utmi_p1_fck);
+ clk_enable(omap->utmi_p2_fck);
+ }
+ clear_bit(OMAP_USBHS_SUSPEND, &omap->state);
+
+end_resume:
+ spin_unlock_irqrestore(&omap->lock, flags);
+ return 0;
+}
+
+
+static int usbhs_suspend(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+ unsigned long flags = 0;
+
+ dev_dbg(dev, "Suspending TI HSUSB Controller\n");
+
+ if (!pdata) {
+ dev_dbg(dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
+
+ if (!test_bit(OMAP_USBHS_INIT, &omap->state) ||
+ test_bit(OMAP_USBHS_SUSPEND, &omap->state))
+ goto end_suspend;
+
+ if (is_omap_usbhs_rev2(omap)) {
+ if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ clk_disable(omap->usbhost_p1_fck);
+ clk_disable(omap->usbtll_p1_fck);
+ }
+ if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ clk_disable(omap->usbhost_p2_fck);
+ clk_disable(omap->usbtll_p2_fck);
+ }
+ clk_disable(omap->utmi_p2_fck);
+ clk_disable(omap->utmi_p1_fck);
+ }
+
+ set_bit(OMAP_USBHS_SUSPEND, &omap->state);
+ pm_runtime_put_sync(dev);
+
+end_suspend:
+ spin_unlock_irqrestore(&omap->lock, flags);
+ return 0;
+}
+
+
+static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
+ .suspend = usbhs_suspend,
+ .resume = usbhs_resume,
+};
+
+#define USBHS_OMAP_DEV_PM_OPS (&usbhsomap_dev_pm_ops)
+#else
+#define USBHS_OMAP_DEV_PM_OPS NULL
+#endif
+
static struct platform_driver usbhs_omap_driver = {
.driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
+ .pm = USBHS_OMAP_DEV_PM_OPS,
},
.remove = __exit_p(usbhs_omap_remove),
};
--
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/