[PATCH] mfd: Add ASIC3 PCMCIA/CF support
From: Paul Parsons
Date: Fri May 20 2011 - 10:49:44 EST
Add PCMCIA/CF support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and pcmcia/pxa2xx-pcmcia drivers. An example configuration is provided by the pxa/hx4700 platform.
Signed-off-by: Paul Parsons <lost.distance@xxxxxxxxx>
---
Tested on an HP iPAQ hx4700 with (1) 1Gb CF memory card (CONFIG_PATA_PCMCIA), and (2) NE2000 Compatible CF Ethernet card (CONFIG_PCMCIA_PCNET).
diff -uprN clean-2.6.39/arch/arm/mach-pxa/hx4700.c linux-2.6.39/arch/arm/mach-pxa/hx4700.c
--- clean-2.6.39/arch/arm/mach-pxa/hx4700.c 2011-05-19 05:06:34.000000000 +0100
+++ linux-2.6.39/arch/arm/mach-pxa/hx4700.c 2011-05-20 15:22:52.333879329 +0100
@@ -261,7 +261,6 @@ static u16 asic3_gpio_config[] = {
ASIC3_GPIOC0_LED0, /* red */
ASIC3_GPIOC1_LED1, /* green */
ASIC3_GPIOC2_LED2, /* blue */
- ASIC3_GPIOC4_CF_nCD,
ASIC3_GPIOC5_nCIOW,
ASIC3_GPIOC6_nCIOR,
ASIC3_GPIOC7_nPCE_1,
@@ -275,6 +274,7 @@ static u16 asic3_gpio_config[] = {
ASIC3_GPIOC15_nPIOR,
/* GPIOD: input GPIOs, CF */
+ ASIC3_GPIOD4_CF_nCD,
ASIC3_GPIOD11_nCIOIS16,
ASIC3_GPIOD12_nCWAIT,
ASIC3_GPIOD15_nPIOW,
@@ -804,10 +804,15 @@ static struct i2c_board_info __initdata
* PCMCIA
*/
+struct pcmcia_low_level;
+extern struct pcmcia_low_level asic3_pcmcia_low_level;
+
static struct platform_device pcmcia = {
- .name = "hx4700-pcmcia",
+ .name = "pxa2xx-pcmcia",
+ .id = -1,
.dev = {
.parent = &asic3.dev,
+ .platform_data = &asic3_pcmcia_low_level,
},
};
diff -uprN clean-2.6.39/drivers/mfd/asic3.c linux-2.6.39/drivers/mfd/asic3.c
--- clean-2.6.39/drivers/mfd/asic3.c 2011-05-19 05:06:34.000000000 +0100
+++ linux-2.6.39/drivers/mfd/asic3.c 2011-05-20 15:22:52.333879329 +0100
@@ -102,7 +102,7 @@ static inline u32 asic3_read_register(st
(reg >> asic->bus_shift));
}
-static void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set)
+void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set)
{
unsigned long flags;
u32 val;
@@ -116,6 +116,7 @@ static void asic3_set_register(struct as
asic3_write_register(asic, reg, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
+EXPORT_SYMBOL_GPL(asic3_set_register);
/* IRQs */
#define MAX_ASIC_ISR_LOOPS 20
diff -uprN clean-2.6.39/drivers/pcmcia/Kconfig linux-2.6.39/drivers/pcmcia/Kconfig
--- clean-2.6.39/drivers/pcmcia/Kconfig 2011-05-19 05:06:34.000000000 +0100
+++ linux-2.6.39/drivers/pcmcia/Kconfig 2011-05-20 15:22:52.333879329 +0100
@@ -216,7 +216,7 @@ config PCMCIA_PXA2XX
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
|| ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
|| MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
- || MACH_COLIBRI320)
+ || MACH_COLIBRI320 || MFD_ASIC3)
select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff -uprN clean-2.6.39/drivers/pcmcia/Makefile linux-2.6.39/drivers/pcmcia/Makefile
--- clean-2.6.39/drivers/pcmcia/Makefile 2011-05-19 05:06:34.000000000 +0100
+++ linux-2.6.39/drivers/pcmcia/Makefile 2011-05-20 15:22:52.333879329 +0100
@@ -73,6 +73,7 @@ pxa2xx-obj-$(CONFIG_MACH_VPAC270) += px
pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += pxa2xx_colibri.o
pxa2xx-obj-$(CONFIG_MACH_COLIBRI320) += pxa2xx_colibri.o
+pxa2xx-obj-$(CONFIG_MFD_ASIC3) += pxa2xx_asic3.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
diff -uprN clean-2.6.39/drivers/pcmcia/pxa2xx_asic3.c linux-2.6.39/drivers/pcmcia/pxa2xx_asic3.c
--- clean-2.6.39/drivers/pcmcia/pxa2xx_asic3.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.39/drivers/pcmcia/pxa2xx_asic3.c 2011-05-20 15:22:52.333879329 +0100
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2011 Paul Parsons <lost.distance@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <linux/mfd/asic3.h>
+#include <mach/hx4700.h>
+
+#include "soc_common.h"
+
+static struct gpio gpios[] = {
+ { GPIO60_HX4700_CF_RNB, GPIOF_DIR_IN, "CF ready" },
+ { GPIO114_HX4700_CF_RESET, GPIOF_OUT_INIT_LOW, "CF reset" },
+ { GPIOD4_CF_nCD, GPIOF_DIR_IN, "CF card detect" },
+ { EGPIO4_CF_3V3_ON, GPIOF_OUT_INIT_LOW, "CF 3.3V enable" },
+};
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, IRQ_GPIO(GPIOD4_CF_nCD), "CF card detect" },
+};
+
+static int hw_init(struct soc_pcmcia_socket *skt)
+{
+ struct platform_device *pdev =
+ to_platform_device(skt->socket.dev.parent->parent);
+ struct asic3 *asic = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+ if (ret)
+ goto out;
+
+ irq_set_irq_type(IRQ_GPIO(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
+
+ ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (ret) {
+ gpio_free_array(gpios, ARRAY_SIZE(gpios));
+ goto out;
+ }
+
+ skt->socket.pci_irq = IRQ_GPIO(GPIO60_HX4700_CF_RNB);
+
+ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+ (ASIC3_EXTCF_CF0_BUF_EN|ASIC3_EXTCF_CF0_PWAIT_EN), 1);
+
+out:
+ return ret;
+}
+
+static void hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ struct platform_device *pdev =
+ to_platform_device(skt->socket.dev.parent->parent);
+ struct asic3 *asic = platform_get_drvdata(pdev);
+
+ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+ (ASIC3_EXTCF_CF0_BUF_EN|ASIC3_EXTCF_CF0_PWAIT_EN), 0);
+
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+ gpio_free_array(gpios, ARRAY_SIZE(gpios));
+}
+
+static void socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = (gpio_get_value(GPIOD4_CF_nCD) == 0);
+ state->ready = (gpio_get_value(GPIO60_HX4700_CF_RNB) != 0);
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->wrprot = 0;
+ state->vs_3v = 1;
+ state->vs_Xv = 0;
+}
+
+static int configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ switch (state->Vcc)
+ {
+ case 0:
+ gpio_set_value(EGPIO4_CF_3V3_ON, 0);
+ break;
+ case 33:
+ gpio_set_value(EGPIO4_CF_3V3_ON, 1);
+ break;
+ default:
+ printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
+ return -EINVAL;
+ }
+
+ gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
+
+ return (0);
+}
+
+static void socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+struct pcmcia_low_level asic3_pcmcia_low_level = {
+ .owner = THIS_MODULE,
+ .nr = 1,
+ .hw_init = hw_init,
+ .hw_shutdown = hw_shutdown,
+ .socket_state = socket_state,
+ .configure_socket=configure_socket,
+ .socket_init = socket_init,
+ .socket_suspend = socket_suspend,
+};
diff -uprN clean-2.6.39/include/linux/mfd/asic3.h linux-2.6.39/include/linux/mfd/asic3.h
--- clean-2.6.39/include/linux/mfd/asic3.h 2011-05-19 05:06:34.000000000 +0100
+++ linux-2.6.39/include/linux/mfd/asic3.h 2011-05-20 15:22:52.333879329 +0100
@@ -129,6 +129,7 @@ struct asic3_platform_data {
#define ASIC3_GPIOC13_nPWAIT ASIC3_CONFIG_GPIO(45, 1, 1, 0)
#define ASIC3_GPIOC14_nPIOIS16 ASIC3_CONFIG_GPIO(46, 1, 1, 0)
#define ASIC3_GPIOC15_nPIOR ASIC3_CONFIG_GPIO(47, 1, 0, 0)
+#define ASIC3_GPIOD4_CF_nCD ASIC3_CONFIG_GPIO(52, 1, 0, 0)
#define ASIC3_GPIOD11_nCIOIS16 ASIC3_CONFIG_GPIO(59, 1, 0, 0)
#define ASIC3_GPIOD12_nCWAIT ASIC3_CONFIG_GPIO(60, 1, 0, 0)
#define ASIC3_GPIOD15_nPIOW ASIC3_CONFIG_GPIO(63, 1, 0, 0)
@@ -293,4 +294,9 @@ struct asic3_platform_data {
#define ASIC3_MAP_SIZE_32BIT 0x2000
#define ASIC3_MAP_SIZE_16BIT 0x1000
+/* Functions needed by pxa2xx-pcmcia */
+
+struct asic3;
+extern void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set);
+
#endif /* __ASIC3_H__ */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/