Re: [tip:core/rcu] Revert "rcu: Decrease memory-barrier usage basedon semi-formal proof"

[Yinghai Lu]

On 05/24/2011 05:05 PM, Paul E. McKenney wrote:
> On Tue, May 24, 2011 at 02:23:45PM -0700, Yinghai Lu wrote:
>> On 05/23/2011 06:35 PM, Paul E. McKenney wrote:
>>> On Mon, May 23, 2011 at 06:26:23PM -0700, Yinghai Lu wrote:
>>>> On 05/23/2011 06:18 PM, Paul E. McKenney wrote:
>>>>
>>>>> OK, so it looks like I need to get this out of the way in order to track
>>>>> down the delays.  Or does reverting PeterZ's patch get you a stable
>>>>> system, but with the longish delays in memory_dev_init()?  If the latter,
>>>>> it might be more productive to handle the two problems separately.
>>>>>
>>>>> For whatever it is worth, I do see about 5% increase in grace-period
>>>>> duration when switching to kthreads.  This is acceptable -- your
>>>>> 30x increase clearly is completely unacceptable and must be fixed.
>>>>> Other than that, the main thing that affects grace period duration is
>>>>> the setting of CONFIG_HZ -- the smaller the HZ value, the longer the
>>>>> grace-period duration.
>>>>
>>>> for my 1024g system when memory hotadd is enabled in kernel config:
>>>> 1. current linus tree + tip tree:  memory_dev_init will take about 100s.
>>>> 2. current linus tree + tip tree + your tree - Peterz patch: 
>>>>    a. on fedora 14 gcc: will cost about 4s: like old times
>>>>    b. on opensuse 11.3 gcc: will cost about 10s.
>>>
>>> So some patch in my tree that is not yet in tip makes things better?
>>>
>>> If so, could you please see which one?  Maybe that would give me a hint
>>> that could make things better on opensuse 11.3 as well.
>>
>> today's tip:
>>
>> [   31.795597] cpu_dev_init done
>> [   40.930202] memory_dev_init done
> 
> One other question...  What is memory_dev_init() doing to wait for so
> many RCU grace periods?  (Yes, I do need to fix the slowdowns in any
> case, but I am curious.)

looks like it register some in sysfs

/*
 * Initialize the sysfs support for memory devices...
 */
int __init memory_dev_init(void)
{
        unsigned int i;
        int ret;
        int err;
        unsigned long block_sz;

        memory_sysdev_class.kset.uevent_ops = &memory_uevent_ops;
        ret = sysdev_class_register(&memory_sysdev_class);
        if (ret)
                goto out;

        block_sz = get_memory_block_size();
        sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;

        /*
         * Create entries for memory sections that were found
         * during boot and have been initialized
         */
        for (i = 0; i < NR_MEM_SECTIONS; i++) {
                if (!present_section_nr(i))
                        continue;
                err = add_memory_section(0, __nr_to_section(i), MEM_ONLINE,
                                         BOOT);
                if (!ret)
                        ret = err;
        }

        err = memory_probe_init();
        if (!ret)
                ret = err;
        err = memory_fail_init();
        if (!ret)
                ret = err;
        err = block_size_init();
        if (!ret)
                ret = err;
out:
        if (ret)
                printk(KERN_ERR "%s() failed: %d\n", __func__, ret);
        return ret;
}


> 
>> after
>>
>> commit e219b351fc90c0f5304e16efbc603b3b78843ea1
>> Author: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>> Date:   Mon May 16 02:44:06 2011 -0700
>>
>>     rcu: Remove old memory barriers from rcu_process_callbacks()
>>     
>>     Second step of partitioning of commit e59fb3120b.
>>     
>>     Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>>
>> diff --git a/kernel/rcutree.c b/kernel/rcutree.c
>> index 3731141..011bf6f 100644
>> --- a/kernel/rcutree.c
>> +++ b/kernel/rcutree.c
>> @@ -1460,25 +1460,11 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
>>   */
>>  static void rcu_process_callbacks(void)
>>  {
>> -	/*
>> -	 * Memory references from any prior RCU read-side critical sections
>> -	 * executed by the interrupted code must be seen before any RCU
>> -	 * grace-period manipulations below.
>> -	 */
>> -	smp_mb(); /* See above block comment. */
>> -
>>  	__rcu_process_callbacks(&rcu_sched_state,
>>  				&__get_cpu_var(rcu_sched_data));
>>  	__rcu_process_callbacks(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
>>  	rcu_preempt_process_callbacks();
>>
>> -	/*
>> -	 * Memory references from any later RCU read-side critical sections
>> -	 * executed by the interrupted code must be seen after any RCU
>> -	 * grace-period manipulations above.
>> -	 */
>> -	smp_mb(); /* See above block comment. */
>> -
>>  	/* If we are last CPU on way to dyntick-idle mode, accelerate it. */
>>  	rcu_needs_cpu_flush();
>>  }
>>
>> cause
>>
>> [   32.235103] cpu_dev_init done
>> [   74.897943] memory_dev_init done
>>
>> then add
>>
>> commit d0d642680d4cf5cc2ccf542b74a3c8b7e197306b
>> Author: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>> Date:   Mon May 16 02:52:04 2011 -0700
>>
>>     rcu: Don't do reschedule unless in irq
>>     
>>     Condition the set_need_resched() in rcu_irq_exit() on in_irq().  This
>>     should be a no-op, because rcu_irq_exit() should only be called from irq.
>>     
>>     Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>>
>> diff --git a/kernel/rcutree.c b/kernel/rcutree.c
>> index 011bf6f..195b3a3 100644
>> --- a/kernel/rcutree.c
>> +++ b/kernel/rcutree.c
>> @@ -421,8 +421,9 @@ void rcu_irq_exit(void)
>>  	WARN_ON_ONCE(rdtp->dynticks & 0x1);
>>
>>  	/* If the interrupt queued a callback, get out of dyntick mode. */
>> -	if (__this_cpu_read(rcu_sched_data.nxtlist) ||
>> -	    __this_cpu_read(rcu_bh_data.nxtlist))
>> +	if (in_irq() &&
>> +	    (__this_cpu_read(rcu_sched_data.nxtlist) ||
>> +	     __this_cpu_read(rcu_bh_data.nxtlist)))
>>  		set_need_resched();
>>  }
>>
>> got:
>>
>> [   34.384490] cpu_dev_init done
>> [   86.656322] memory_dev_init done
>>
>>
>> after
>>
>> commit fcfc28801f5b3b9c70616fc57e3a2c6f52014e14
>> Author: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>> Date:   Mon May 16 14:27:31 2011 -0700
>>
>>     rcu: Make rcu_enter_nohz() pay attention to nesting
>>     
>>     The old version of rcu_enter_nohz() forced RCU into nohz mode even if
>>     the nesting count was non-zero.  This change causes rcu_enter_nohz()
>>     to hold off for non-zero nesting counts.
>>     
>>     Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>>
>> diff --git a/kernel/rcutree.c b/kernel/rcutree.c
>> index 195b3a3..99c6038 100644
>> --- a/kernel/rcutree.c
>> +++ b/kernel/rcutree.c
>> @@ -324,8 +324,8 @@ void rcu_enter_nohz(void)
>>  	smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
>>  	local_irq_save(flags);
>>  	rdtp = &__get_cpu_var(rcu_dynticks);
>> -	rdtp->dynticks++;
>> -	rdtp->dynticks_nesting--;
>> +	if (--rdtp->dynticks_nesting == 0)
>> +		rdtp->dynticks++;
>>  	WARN_ON_ONCE(rdtp->dynticks & 0x1);
>>  	local_irq_restore(flags);
>>  }
>>
>> got: 
>>
>> [   32.414049] cpu_dev_init done
>> [   38.237979] memory_dev_init done
> 
> So this is best for you -- where we have done all but the last commit
> of restoring "Decrease memory-barrier usage based on semi-formal proof".
> It makes sense that this one would help, as it is eliminating delays
> due to misnesting.  These delays are not hangs, as force_quiescent_state()
> will eventually force the right thing to happen, but getting rid of these
> delays should indeed speed things up.
> 
>> after:
>> commit bcd6e68330f893a81b3519ab3c5fc2bebbc9988c
>> Author: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>> Date:   Tue Sep 7 10:38:22 2010 -0700
>>
>>     rcu: Decrease memory-barrier usage based on semi-formal proof
>> ...
>>
>> got:
>>
>> [   32.447936] cpu_dev_init done
>> [  111.027066] memory_dev_init done
> 
> So there is something nasty in this patch.
> 
> Not seeing it immediately, but it does give me some focus for both
> code inspection and possible diagnostic patches.
> 
>> after 
>>
>> commit fbb753fb9dd62318d27fa070c686423ced139817
>> Author: Paul E. McKenney <paul.mckenney@xxxxxxxxxx>
>> Date:   Wed May 11 05:33:33 2011 -0700
>>
>>     atomic: Add atomic_or()
>>     
>>     An atomic_or() function is needed by TREE_RCU to avoid deadlock, so
>>     add a generic version.
>>     
>>     Signed-off-by: Paul E. McKenney <paul.mckenney@xxxxxxxxxx>
>>     Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
>>
>> diff --git a/include/linux/atomic.h b/include/linux/atomic.h
>> index 96c038e..ee456c7 100644
>> --- a/include/linux/atomic.h
>> +++ b/include/linux/atomic.h
>> @@ -34,4 +34,17 @@ static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
>>  }
>>  #endif
>>
>> +#ifndef CONFIG_ARCH_HAS_ATOMIC_OR
>> +static inline void atomic_or(int i, atomic_t *v)
>> +{
>> +	int old;
>> +	int new;
>> +
>> +	do {
>> +		old = atomic_read(v);
>> +		new = old | i;
>> +	} while (atomic_cmpxchg(v, old, new) != old);
>> +}
>> +#endif /* #ifndef CONFIG_ARCH_HAS_ATOMIC_OR */
>> +
>>  #endif /* _LINUX_ATOMIC_H */
>>
>> got:
>>
>> [   32.803704] cpu_dev_init done
>> [   99.171292] memory_dev_init done
> 
> So the difference between these two is noise, I hope.  Adding a static
> inline function that is not used should not have an effect on performance.
> Still, the difference between 6 seconds and 60 seconds rises far above
> this noise level, so the big differences are likely quite real.

could be softirq to kthread change...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/