Re: [PATCH 1/4] clk: Add a generic clock infrastructure

[Richard Zhao]

On Fri, May 20, 2011 at 03:27:49PM +0800, Jeremy Kerr wrote:
> We currently have ~21 definitions of struct clk in the ARM architecture,
> each defined on a per-platform basis. This makes it difficult to define
> platform- (or architecture-) independent clock sources without making
> assumptions about struct clk, and impossible to compile two
> platforms with different struct clks into a single image.
> 
> This change is an effort to unify struct clk where possible, by defining
> a common struct clk, and a set of clock operations. Different clock
> implementations can set their own operations, and have a standard
> interface for generic code. The callback interface is exposed to the
> kernel proper, while the clock implementations only need to be seen by
> the platform internals.
> 
> The interface is split into two halves:
> 
>  * struct clk, which is the generic-device-driver interface. This
>    provides a set of functions which drivers may use to request
>    enable/disable, query or manipulate in a hardware-independent manner.
> 
>  * struct clk_hw and struct clk_hw_ops, which is the hardware-specific
>    interface. Clock drivers implement the ops, which allow the core
>    clock code to implement the generic 'struct clk' API.
> 
> This allows us to share clock code among platforms, and makes it
> possible to dynamically create clock devices in platform-independent
> code.
> 
> Platforms can enable the generic struct clock through
> CONFIG_GENERIC_CLK. In this case, the clock infrastructure consists of a
> common, opaque struct clk, and a set of clock operations (defined per
> type of clock):
> 
>   struct clk_hw_ops {
>   	int		(*prepare)(struct clk_hw *);
>   	void		(*unprepare)(struct clk_hw *);
>   	int		(*enable)(struct clk_hw *);
>   	void		(*disable)(struct clk_hw *);
>   	unsigned long	(*recalc_rate)(struct clk_hw *);
why not pass down parent rate?
>   	int		(*set_rate)(struct clk_hw *,
>   					unsigned long, unsigned long *);
>   	long		(*round_rate)(struct clk_hw *, unsigned long);
ditto
>   	int		(*set_parent)(struct clk_hw *, struct clk *);
>   	struct clk *	(*get_parent)(struct clk_hw *);
>   };
> 
[...]

> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> new file mode 100644
> index 0000000..ad90a90
> --- /dev/null
> +++ b/drivers/clk/clk.c
> @@ -0,0 +1,229 @@
> +/*
> + * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@xxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Standard functionality for the common clock API.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +struct clk {
> +	const char		*name;
> +	struct clk_hw_ops	*ops;
> +	struct clk_hw		*hw;
If we don't let it void *, why not put clk_hw_ops into clk_hw too? It'll be
more easy to define static clocks.
> +	unsigned int		enable_count;
> +	unsigned int		prepare_count;
> +	struct clk		*parent;
> +	unsigned long		rate;
> +};
> +
> +static DEFINE_SPINLOCK(enable_lock);
> +static DEFINE_MUTEX(prepare_lock);
> +
> +static void __clk_unprepare(struct clk *clk)
> +{
> +	if (!clk)
> +		return;
> +
> +	if (WARN_ON(clk->prepare_count == 0))
> +		return;
> +
> +	if (--clk->prepare_count > 0)
> +		return;
> +
> +	WARN_ON(clk->enable_count > 0);
> +
> +	if (clk->ops->unprepare)
> +		clk->ops->unprepare(clk->hw);
> +
> +	__clk_unprepare(clk->parent);
> +}
> +
> +void clk_unprepare(struct clk *clk)
> +{
> +	mutex_lock(&prepare_lock);
> +	__clk_unprepare(clk);
> +	mutex_unlock(&prepare_lock);
> +}
> +EXPORT_SYMBOL_GPL(clk_unprepare);
> +
> +static int __clk_prepare(struct clk *clk)
> +{
> +	int ret = 0;
> +
> +	if (!clk)
> +		return 0;
> +
> +	if (clk->prepare_count == 0) {
> +		ret = __clk_prepare(clk->parent);
> +		if (ret)
> +			return ret;
> +
> +		if (clk->ops->prepare) {
> +			ret = clk->ops->prepare(clk->hw);
> +			if (ret) {
> +				__clk_unprepare(clk->parent);
> +				return ret;
> +			}
> +		}
> +	}
> +
> +	clk->prepare_count++;
> +
> +	return 0;
> +}
> +
> +int clk_prepare(struct clk *clk)
> +{
> +	int ret;
> +
> +	mutex_lock(&prepare_lock);
> +	ret = __clk_prepare(clk);
> +	mutex_unlock(&prepare_lock);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(clk_prepare);
> +
> +static void __clk_disable(struct clk *clk)
> +{
> +	if (!clk)
> +		return;
> +
> +	if (WARN_ON(clk->enable_count == 0))
> +		return;
> +
> +	if (--clk->enable_count > 0)
> +		return;
> +
> +	if (clk->ops->disable)
> +		clk->ops->disable(clk->hw);
> +	__clk_disable(clk->parent);
> +}
> +
> +void clk_disable(struct clk *clk)
> +{
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&enable_lock, flags);
> +	__clk_disable(clk);
> +	spin_unlock_irqrestore(&enable_lock, flags);
> +}
> +EXPORT_SYMBOL_GPL(clk_disable);
> +
> +static int __clk_enable(struct clk *clk)
> +{
> +	int ret;
> +
> +	if (!clk)
> +		return 0;
> +
> +	if (WARN_ON(clk->prepare_count == 0))
> +		return -ESHUTDOWN;
> +
> +
> +	if (clk->enable_count == 0) {
> +		ret = __clk_enable(clk->parent);
> +		if (ret)
> +			return ret;
> +
> +		if (clk->ops->enable) {
> +			ret = clk->ops->enable(clk->hw);
> +			if (ret) {
> +				__clk_disable(clk->parent);
> +				return ret;
> +			}
> +		}
> +	}
> +
> +	clk->enable_count++;
> +	return 0;
> +}
> +
> +int clk_enable(struct clk *clk)
> +{
> +	unsigned long flags;
> +	int ret;
> +
> +	spin_lock_irqsave(&enable_lock, flags);
> +	ret = __clk_enable(clk);
> +	spin_unlock_irqrestore(&enable_lock, flags);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(clk_enable);
> +
> +unsigned long clk_get_rate(struct clk *clk)
> +{
> +	if (!clk)
> +		return 0;
> +	return clk->rate;
> +}
> +EXPORT_SYMBOL_GPL(clk_get_rate);
> +
> +long clk_round_rate(struct clk *clk, unsigned long rate)
> +{
> +	if (clk && clk->ops->round_rate)
> +		return clk->ops->round_rate(clk->hw, rate);
pass parent rate? IMHO, common code can handle parent as much as possible.
> +	return rate;
> +}
> +EXPORT_SYMBOL_GPL(clk_round_rate);
> +
> +int clk_set_rate(struct clk *clk, unsigned long rate)
> +{
> +	/* not yet implemented */
> +	return -ENOSYS;
> +}
> +EXPORT_SYMBOL_GPL(clk_set_rate);
> +
> +struct clk *clk_get_parent(struct clk *clk)
> +{
> +	if (!clk)
> +		return NULL;
> +
> +	return clk->parent;
> +}
> +EXPORT_SYMBOL_GPL(clk_get_parent);
> +
> +int clk_set_parent(struct clk *clk, struct clk *parent)
> +{
> +	/* not yet implemented */
> +	return -ENOSYS;
> +}
> +EXPORT_SYMBOL_GPL(clk_set_parent);
> +
> +struct clk *clk_register(struct clk_hw_ops *ops, struct clk_hw *hw,
> +		const char *name)
> +{
> +	struct clk *clk;
> +
> +	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
> +	if (!clk)
> +		return NULL;
> +
> +	clk->name = name;
> +	clk->ops = ops;
> +	clk->hw = hw;
> +	hw->clk = clk;
> +
> +	/* Query the hardware for parent and initial rate */
> +
> +	if (clk->ops->get_parent)
> +		/* We don't to lock against prepare/enable here, as
> +		 * the clock is not yet accessible from anywhere */
> +		clk->parent = clk->ops->get_parent(clk->hw);
> +
> +	if (clk->ops->recalc_rate)
> +		clk->rate = clk->ops->recalc_rate(clk->hw);
ditto

Thanks
Richard
> +
> +
> +	return clk;
> +}
> +EXPORT_SYMBOL_GPL(clk_register);
> diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
> index 6db161f..e2a9719 100644
> --- a/drivers/clk/clkdev.c
> +++ b/drivers/clk/clkdev.c
> @@ -23,6 +23,13 @@
>  static LIST_HEAD(clocks);
>  static DEFINE_MUTEX(clocks_mutex);
>  
> +/* For USE_COMMON_STRUCT_CLK, these are provided in clk.c, but not exported
> + * through other headers; we don't want them used anywhere but here. */
> +#ifdef CONFIG_USE_COMMON_STRUCT_CLK
> +extern int __clk_get(struct clk *clk);
> +extern void __clk_put(struct clk *clk);
> +#endif
> +
>  /*
>   * Find the correct struct clk for the device and connection ID.
>   * We do slightly fuzzy matching here:
> diff --git a/include/linux/clk.h b/include/linux/clk.h
> index 1d37f42..93ff870 100644
> --- a/include/linux/clk.h
> +++ b/include/linux/clk.h
> @@ -3,6 +3,7 @@
>   *
>   *  Copyright (C) 2004 ARM Limited.
>   *  Written by Deep Blue Solutions Limited.
> + *  Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@xxxxxxxxxxxxx>
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License version 2 as
> @@ -11,17 +12,103 @@
>  #ifndef __LINUX_CLK_H
>  #define __LINUX_CLK_H
>  
> +#include <linux/err.h>
> +#include <linux/spinlock.h>
> +
>  struct device;
>  
> -/*
> - * The base API.
> +struct clk;
> +
> +#ifdef CONFIG_GENERIC_CLK
> +
> +struct clk_hw {
> +	struct clk *clk;
> +};
> +
> +/**
> + * struct clk_hw_ops -  Callback operations for hardware clocks; these are to
> + * be provided by the clock implementation, and will be called by drivers
> + * through the clk_* API.
> + *
> + * @prepare:	Prepare the clock for enabling. This must not return until
> + *		the clock is fully prepared, and it's safe to call clk_enable.
> + *		This callback is intended to allow clock implementations to
> + *		do any initialisation that may sleep. Called with
> + *		prepare_lock held.
> + *
> + * @unprepare:	Release the clock from its prepared state. This will typically
> + *		undo any work done in the @prepare callback. Called with
> + *		prepare_lock held.
> + *
> + * @enable:	Enable the clock atomically. This must not return until the
> + *		clock is generating a valid clock signal, usable by consumer
> + *		devices. Called with enable_lock held. This function must not
> + *		sleep.
> + *
> + * @disable:	Disable the clock atomically. Called with enable_lock held.
> + *		This function must not sleep.
> + *
> + * @recalc_rate	Recalculate the rate of this clock, by quering hardware
> + *		and/or the clock's parent. Called with the global clock mutex
> + *		held. Optional, but recommended - if this op is not set,
> + *		clk_get_rate will return 0.
> + *
> + * @get_parent	Query the parent of this clock; for clocks with multiple
> + *		possible parents, query the hardware for the current
> + *		parent. Currently only called when the clock is first
> + *		registered.
> + *
> + * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
> + * implementations to split any work between atomic (enable) and sleepable
> + * (prepare) contexts.  If a clock requires sleeping code to be turned on, this
> + * should be done in clk_prepare. Switching that will not sleep should be done
> + * in clk_enable.
> + *
> + * Typically, drivers will call clk_prepare when a clock may be needed later
> + * (eg. when a device is opened), and clk_enable when the clock is actually
> + * required (eg. from an interrupt). Note that clk_prepare *must* have been
> + * called before clk_enable.
> + */
> +struct clk_hw_ops {
> +	int		(*prepare)(struct clk_hw *);
> +	void		(*unprepare)(struct clk_hw *);
> +	int		(*enable)(struct clk_hw *);
> +	void		(*disable)(struct clk_hw *);
> +	unsigned long	(*recalc_rate)(struct clk_hw *);
> +	long		(*round_rate)(struct clk_hw *, unsigned long);
> +	struct clk *	(*get_parent)(struct clk_hw *);
> +};
> +
> +/**
> + * clk_prepare - prepare clock for atomic enabling.
> + *
> + * @clk: The clock to prepare
> + *
> + * Do any possibly sleeping initialisation on @clk, allowing the clock to be
> + * later enabled atomically (via clk_enable). This function may sleep.
>   */
> +int clk_prepare(struct clk *clk);
>  
> +/**
> + * clk_unprepare - release clock from prepared state
> + *
> + * @clk: The clock to release
> + *
> + * Do any (possibly sleeping) cleanup on clk. This function may sleep.
> + */
> +void clk_unprepare(struct clk *clk);
> +
> +#else /* !CONFIG_GENERIC_CLK */
>  
>  /*
> - * struct clk - an machine class defined object / cookie.
> + * For !CONFIG_GENERIC_CLK, we don't enforce any atomicity
> + * requirements for clk_enable/clk_disable, so the prepare and unprepare
> + * functions are no-ops
>   */
> -struct clk;
> +static inline int clk_prepare(struct clk *clk) { return 0; }
> +static inline void clk_unprepare(struct clk *clk) { }
> +
> +#endif /* !CONFIG_GENERIC_CLK */
>  
>  /**
>   * clk_get - lookup and obtain a reference to a clock producer.
> @@ -67,6 +154,7 @@ void clk_disable(struct clk *clk);
>  /**
>   * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
>   *		  This is only valid once the clock source has been enabled.
> + *		  Returns zero if the clock rate is unknown.
>   * @clk: clock source
>   */
>  unsigned long clk_get_rate(struct clk *clk);
> @@ -83,12 +171,6 @@ unsigned long clk_get_rate(struct clk *clk);
>   */
>  void clk_put(struct clk *clk);
>  
> -
> -/*
> - * The remaining APIs are optional for machine class support.
> - */
> -
> -
>  /**
>   * clk_round_rate - adjust a rate to the exact rate a clock can provide
>   * @clk: clock source
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/