Re: [GIT PULL] omap updates for 2.6.40

From: Igor Grinberg
Date: Thu May 26 2011 - 08:14:31 EST

Next message: Tomas Henzl: "Re: [PATCH 01/16] hpsa: do readl after writel in main i/o path toensure commands don't get lost."
Previous message: Ingo Molnar: "[PATCH] net/core/filter.c: Fix build error"
In reply to: Tony Lindgren: "[GIT PULL] omap updates for 2.6.40"
Next in thread: Tony Lindgren: "Re: [GIT PULL] omap updates for 2.6.40"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Tony,

What about this one: [PATCH v2] arm: omap2plus: move NAND_BLOCK_SIZE out of boards

Why not include it? It is no new code, just generalize stuff and 11 lines off... not much but still.

On 05/26/11 14:39, Tony Lindgren wrote:

> Hi Linus,
>
> Please pull omap updates for this merge window from:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus
>
> This contains clean-up to shrink down omap specific code a bit. Also included
> are some fixes. But basically no new code at this point.
>
> Regards,
>
> Tony
>
>
> Aaro Koskinen (5):
> OMAP3+: smartreflex: fix sr_late_init() error path in probe
> OMAP3+: smartreflex: request the memory region
> OMAP3+: smartreflex: fix ioremap leak on probe error
> OMAP3+: smartreflex: delete instance from sr_list on probe error
> OMAP3+: smartreflex: delete debugfs entries on probe error
>
> Felipe Balbi (1):
> usb: musb: am35x: fix compile error when building am35x
>
> Hema HK (3):
> usb: musb: OMAP4430: Power down the PHY during board init
> usb: otg: OMAP4430: Fixing the omap4430_phy_init function
> usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
>
> Igor Grinberg (2):
> arm: omap: gpmc-smsc911x: minor style fixes
> arm: omap2plus: GPIO cleanup
>
> Jean Pihet (5):
> OMAP3 cpuidle: remove useless SDP specific timings
> OMAP3: clean-up mach specific cpuidle data structures
> OMAP3: cpuidle: re-organize the C-states data
> OMAP3: cpuidle: code rework for improved readability
> OMAP3: cpuidle: change the power domains modes determination logic
>
> Mike Rapoport (10):
> omap: gpmc-smsc911x: always set irq flags to IORESOURCE_IRQ_LOWLEVEL
> omap: convert boards that use SMSC911x to use gpmc-smsc911x
> omap: consolidate touch screen initialization among different boards
> omap: use common initialization for PMIC i2c bus
> omap: move detection of NAND CS to common-board-devices
> omap: musb: introduce default board config
> omap: igep0020: name refactoring for future merge with IGEP3
> omap: igep0020: minor refactoring
> omap: igep0020: add support for IGEP3
> omap: drop board-igep0030.c
>
> Nishanth Menon (2):
> OMAP4: PM: remove redundant #ifdef CONFIG_PM
> OMAP3+: voltage: remove spurious pr_notice for debugfs
>
> Sanjeev Premi (1):
> OMAP3: PM: Boot message is not an error, and not helpful, remove it
>
> Tony Lindgren (5):
> omap: Run make savedefconfig on omap2plus_defconfig to shrink it
> omap: Remove support for omap2evm
> Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-next
> Merge branch 'for-tony' of master.kernel.org:/.../balbi/usb into omap-for-linus
> Merge branch 'for_2.6.40/pm-cleanup' of ssh://master.kernel.org/.../khilman/linux-omap-pm into omap-for-linus
>
> omar ramirez (2):
> OMAP3/4: l3: fix omap3_l3_probe error path
> OMAP3/4: l3: minor cleanup for parenthesis and extra spaces
>
> arch/arm/configs/omap2plus_defconfig | 83 +----
> arch/arm/mach-omap2/Kconfig | 1 +
> arch/arm/mach-omap2/Makefile | 4 +-
> arch/arm/mach-omap2/board-2430sdp.c | 27 +--
> arch/arm/mach-omap2/board-3430sdp.c | 151 ++-------
> arch/arm/mach-omap2/board-4430sdp.c | 114 ++-----
> arch/arm/mach-omap2/board-am3517crane.c | 10 +-
> arch/arm/mach-omap2/board-am3517evm.c | 56 +--
> arch/arm/mach-omap2/board-apollon.c | 29 +-
> arch/arm/mach-omap2/board-cm-t35.c | 236 ++----------
> arch/arm/mach-omap2/board-cm-t3517.c | 9 +-
> arch/arm/mach-omap2/board-devkit8000.c | 131 +------
> arch/arm/mach-omap2/board-igep0020.c | 449 +++++++++++-----------
> arch/arm/mach-omap2/board-igep0030.c | 458 -----------------------
> arch/arm/mach-omap2/board-ldp.c | 138 +-------
> arch/arm/mach-omap2/board-n8x0.c | 28 +-
> arch/arm/mach-omap2/board-omap3beagle.c | 194 +++-------
> arch/arm/mach-omap2/board-omap3evm.c | 242 +++----------
> arch/arm/mach-omap2/board-omap3logic.c | 14 +-
> arch/arm/mach-omap2/board-omap3pandora.c | 90 +----
> arch/arm/mach-omap2/board-omap3stalker.c | 133 +------
> arch/arm/mach-omap2/board-omap3touchbook.c | 121 +------
> arch/arm/mach-omap2/board-omap4panda.c | 79 ++---
> arch/arm/mach-omap2/board-overo.c | 265 +++-----------
> arch/arm/mach-omap2/board-rm680.c | 21 +-
> arch/arm/mach-omap2/board-rx51-peripherals.c | 42 +--
> arch/arm/mach-omap2/board-rx51-video.c | 5 +-
> arch/arm/mach-omap2/board-rx51.c | 18 +-
> arch/arm/mach-omap2/board-zoom-debugboard.c | 65 +---
> arch/arm/mach-omap2/board-zoom-display.c | 31 +--
> arch/arm/mach-omap2/board-zoom-peripherals.c | 29 +--
> arch/arm/mach-omap2/common-board-devices.c | 163 ++++++++
> arch/arm/mach-omap2/common-board-devices.h | 35 ++
> arch/arm/mach-omap2/cpuidle34xx.c | 436 +++++++--------------
> arch/arm/mach-omap2/gpmc-smc91x.c | 11 +-
> arch/arm/mach-omap2/gpmc-smsc911x.c | 44 +--
> arch/arm/mach-omap2/omap_l3_noc.c | 51 ++--
> arch/arm/mach-omap2/omap_l3_smx.c | 42 +--
> arch/arm/mach-omap2/omap_phy_internal.c | 9 +-
> arch/arm/mach-omap2/pm.h | 17 +-
> arch/arm/mach-omap2/pm34xx.c | 14 -
> arch/arm/mach-omap2/pm44xx.c | 2 -
> arch/arm/mach-omap2/smartreflex.c | 23 +-
> arch/arm/mach-omap2/usb-musb.c | 22 +-
> arch/arm/mach-omap2/usb-tusb6010.c | 3 +-
> arch/arm/mach-omap2/voltage.c | 1 -
> arch/arm/plat-omap/include/plat/gpmc-smsc911x.h | 4 +-
> arch/arm/plat-omap/include/plat/uncompress.h | 1 -
> arch/arm/plat-omap/include/plat/usb.h | 2 +-
> drivers/video/omap/Makefile | 1 -
> drivers/video/omap/lcd_omap2evm.c | 192 ----------
> sound/soc/omap/Kconfig | 8 -
> sound/soc/omap/Makefile | 1 -
> sound/soc/omap/omap2evm.c | 139 -------
> 54 files changed, 1110 insertions(+), 3384 deletions(-)
> delete mode 100644 arch/arm/mach-omap2/board-igep0030.c
> create mode 100644 arch/arm/mach-omap2/common-board-devices.c
> create mode 100644 arch/arm/mach-omap2/common-board-devices.h
> delete mode 100644 drivers/video/omap/lcd_omap2evm.c
> delete mode 100644 sound/soc/omap/omap2evm.c
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

--
Regards,
Igor.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Tomas Henzl: "Re: [PATCH 01/16] hpsa: do readl after writel in main i/o path toensure commands don't get lost."
Previous message: Ingo Molnar: "[PATCH] net/core/filter.c: Fix build error"
In reply to: Tony Lindgren: "[GIT PULL] omap updates for 2.6.40"
Next in thread: Tony Lindgren: "Re: [GIT PULL] omap updates for 2.6.40"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]