No /proc/diskstats accounting for loopN or md...p. disks??

[Grant Coady]

I built a RAID box, 6 x 1TB SATA drives, RAID 6, RAID10, runs well, but 
I notice that /proc/diskstats is not accumulating numbers for loop[0-7] 
devices, nor does it grab I/O numbers for partitioned mdadm RAIDs.

For that second, I partition the drives, and several RAIDs using different 
partitions are fine, but if I make a RAID6, then partition that device, 
then the eg. md125p1 device will not get stats collected, they all go to 
the parent device.  My 'cure' for this one is 'don't do that'.

Loop devices simply show all zeroes on /proc/diskstats.  No cure?

So what's the spell to get full /proc/diskstats accounting?  I looked in 
/sys/... and the same dev gets all zeroes in there too, so it looks as 
if the numbers are not simply getting calculated.

I'm running 2.6.38.7 on Slackware64-13.1 but this happens on earlier 
version kernel.  Be upgrading to Slackware64-13.37 soon, but I doubt 
it's user space...

Happy to do directed testing for you.  Also if you tell me it doesn't 
work like that, that's okay too, but then loopX should disappear from 
/proc/diskstats, no?  

Thanks heaps for info, ideas,
Grant.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/