[PATCH] mfd: Read wm831x AUXADC conversion results before acknowledging interrupt

[Mark Brown]

Ensure that there's no possibility of loosing an AUXADC interrupt by reading
the conversion result in the IRQ handler when using interrupts. Otherwise
it's possible that under very heavy load a new conversion could be initiated
before the acknowledgement for a previous interrupt has happened.

Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
 drivers/mfd/wm831x-core.c       |   47 +++++++++++++++++++++++++-------------
 include/linux/mfd/wm831x/core.h |    1 +
 2 files changed, 32 insertions(+), 16 deletions(-)

diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 58f033b..ba9e9f39 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -376,6 +376,16 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 				goto disable;
 			}
 		}
+
+		ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+		if (ret < 0) {
+			dev_err(wm831x->dev,
+				"Failed to read AUXADC data: %d\n", ret);
+			goto disable;
+		}
+
+		wm831x->auxadc_data = ret;
+
 	} else {
 		/* If we are using interrupts then wait for the
 		 * interrupt to complete.  Use an extremely long
@@ -390,23 +400,18 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 		}
 	}
 
-	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
-	if (ret < 0) {
-		dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret);
+	src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK)
+	       >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
+
+	if (src == 14)
+		src = WM831X_AUX_CAL;
+
+	if (src != input) {
+		dev_err(wm831x->dev, "Data from source %d not %d\n",
+			src, input);
+		ret = -EINVAL;
 	} else {
-		src = ((ret & WM831X_AUX_DATA_SRC_MASK)
-		       >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
-
-		if (src == 14)
-			src = WM831X_AUX_CAL;
-
-		if (src != input) {
-			dev_err(wm831x->dev, "Data from source %d not %d\n",
-				src, input);
-			ret = -EINVAL;
-		} else {
-			ret &= WM831X_AUX_DATA_MASK;
-		}
+		wm831x->auxadc_data &= WM831X_AUX_DATA_MASK;
 	}
 
 disable:
@@ -420,6 +425,16 @@ EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
 static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
 {
 	struct wm831x *wm831x = irq_data;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+	if (ret < 0) {
+		dev_err(wm831x->dev,
+			"Failed to read AUXADC data: %d\n", ret);
+		wm831x->auxadc_data = 0xffff;
+	} else {
+		wm831x->auxadc_data = ret;
+	}
 
 	complete(&wm831x->auxadc_done);
 
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 1d93cbe..fb6568e 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -379,6 +379,7 @@ struct wm831x {
 
 	struct mutex auxadc_lock;
 	struct completion auxadc_done;
+	u16 auxadc_data;
 
 	/* The WM831x has a security key blocking access to certain
 	 * registers.  The mutex is taken by the accessors for locking
-- 
1.7.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/