[PATCH v15 9/10] usb: Adding SuperSpeed support to dummy_hcd

From: Tatyana Brokhman
Date: Mon Jun 06 2011 - 07:43:33 EST

This patch adds SS support to the dummy hcd module. It may be used to test
SS device when no (SS) HW is available.
USB 3.0 hub includes 2 hubs - HS and SS ones.
This patch adds support for a SS root hub in the dummy_hcd module.
A new module parameter was added: is_super_speed. When set to true, a SS
root hub will also be registered and the connected device will be
enumerated over the SS root hub. The default of this parameter is false.

Signed-off-by: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>

---
drivers/usb/gadget/Kconfig | 1 +
drivers/usb/gadget/dummy_hcd.c | 562 +++++++++++++++++++++++++++++++++-------
2 files changed, 474 insertions(+), 89 deletions(-)

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5927541..dba4f7b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -602,6 +602,7 @@ config USB_GADGET_DUMMY_HCD
boolean "Dummy HCD (DEVELOPMENT)"
depends on USB=y || (USB=m && USB_GADGET=m)
select USB_GADGET_DUALSPEED
+ select USB_GADGET_SUPERSPEED
help
This host controller driver emulates USB, looping all data transfer
requests back to a USB "gadget driver" in the same host. The host
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 6ecda10..f0cdd13 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -70,6 +70,15 @@ MODULE_DESCRIPTION (DRIVER_DESC);
MODULE_AUTHOR ("David Brownell");
MODULE_LICENSE ("GPL");

+struct dummy_hcd_module_parameters {
+ bool is_super_speed;
+};
+
+static struct dummy_hcd_module_parameters mod_data = {
+ .is_super_speed = false
+};
+module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
+MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
/*-------------------------------------------------------------------------*/

/* gadget side driver data structres */
@@ -188,6 +197,7 @@ struct dummy {
* MASTER/HOST side support
*/
struct dummy_hcd *hs_hcd;
+ struct dummy_hcd *ss_hcd;
};

static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd)
@@ -218,7 +228,10 @@ static inline struct dummy *ep_to_dummy (struct dummy_ep *ep)
static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget)
{
struct dummy *dum = container_of(gadget, struct dummy, gadget);
- return dum->hs_hcd;
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ return dum->ss_hcd;
+ else
+ return dum->hs_hcd;
}

static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
@@ -266,60 +279,117 @@ stop_activity (struct dummy *dum)
/* driver now does any non-usb quiescing necessary */
}

+/**
+ * set_link_state_by_speed() - Sets the current state of the link according to
+ * the hcd speed
+ * @dum_hcd: pointer to the dummy_hcd structure to update the link state for
+ *
+ * This function updates the port_status according to the link state and the
+ * speed of the hcd.
+ */
+static void set_link_state_by_speed(struct dummy_hcd *dum_hcd)
+{
+ struct dummy *dum = dum_hcd->dum;
+
+ if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) {
+ if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) {
+ dum_hcd->port_status = 0;
+ } else if (!dum->pullup || dum->udc_suspended) {
+ /* UDC suspend must cause a disconnect */
+ dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_ENABLE);
+ if ((dum_hcd->old_status &
+ USB_PORT_STAT_CONNECTION) != 0)
+ dum_hcd->port_status |=
+ (USB_PORT_STAT_C_CONNECTION << 16);
+ } else {
+ /* device is connected and not suspended */
+ dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_SPEED_5GBPS) ;
+ if ((dum_hcd->old_status &
+ USB_PORT_STAT_CONNECTION) == 0)
+ dum_hcd->port_status |=
+ (USB_PORT_STAT_C_CONNECTION << 16);
+ if ((dum_hcd->port_status &
+ USB_PORT_STAT_ENABLE) == 1 &&
+ (dum_hcd->port_status &
+ USB_SS_PORT_LS_U0) == 1 &&
+ dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+ dum_hcd->active = 1;
+ }
+ } else {
+ if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) {
+ dum_hcd->port_status = 0;
+ } else if (!dum->pullup || dum->udc_suspended) {
+ /* UDC suspend must cause a disconnect */
+ dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_ENABLE |
+ USB_PORT_STAT_LOW_SPEED |
+ USB_PORT_STAT_HIGH_SPEED |
+ USB_PORT_STAT_SUSPEND);
+ if ((dum_hcd->old_status &
+ USB_PORT_STAT_CONNECTION) != 0)
+ dum_hcd->port_status |=
+ (USB_PORT_STAT_C_CONNECTION << 16);
+ } else {
+ dum_hcd->port_status |= USB_PORT_STAT_CONNECTION;
+ if ((dum_hcd->old_status &
+ USB_PORT_STAT_CONNECTION) == 0)
+ dum_hcd->port_status |=
+ (USB_PORT_STAT_C_CONNECTION << 16);
+ if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0)
+ dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
+ else if ((dum_hcd->port_status &
+ USB_PORT_STAT_SUSPEND) == 0 &&
+ dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+ dum_hcd->active = 1;
+ }
+ }
+}
+
/* caller must hold lock */
static void set_link_state(struct dummy_hcd *dum_hcd)
{
struct dummy *dum = dum_hcd->dum;

dum_hcd->active = 0;
- if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0)
- dum_hcd->port_status = 0;
-
- /* UDC suspend must cause a disconnect */
- else if (!dum->pullup || dum->udc_suspended) {
- dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
- USB_PORT_STAT_ENABLE |
- USB_PORT_STAT_LOW_SPEED |
- USB_PORT_STAT_HIGH_SPEED |
- USB_PORT_STAT_SUSPEND);
- if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0)
- dum_hcd->port_status |=
- (USB_PORT_STAT_C_CONNECTION << 16);
- } else {
- dum_hcd->port_status |= USB_PORT_STAT_CONNECTION;
- if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) == 0)
- dum_hcd->port_status |=
- (USB_PORT_STAT_C_CONNECTION << 16);
- if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0)
- dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
- else if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
- dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
- dum_hcd->active = 1;
- }
+ if (dum->pullup)
+ if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 &&
+ dum->gadget.speed != USB_SPEED_SUPER) ||
+ (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 &&
+ dum->gadget.speed == USB_SPEED_SUPER))
+ return;
+
+ set_link_state_by_speed(dum_hcd);

if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 ||
dum_hcd->active)
dum_hcd->resuming = 0;

+ /* if !connected or reset */
if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0 ||
(dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) {
+ /*
+ * We're connected and not reset (reset occurred now),
+ * and driver attached - disconnect!
+ */
if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0 &&
- (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 &&
- dum->driver) {
- stop_activity (dum);
- spin_unlock (&dum->lock);
- dum->driver->disconnect (&dum->gadget);
- spin_lock (&dum->lock);
+ (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 &&
+ dum->driver) {
+ stop_activity(dum);
+ spin_unlock(&dum->lock);
+ dum->driver->disconnect(&dum->gadget);
+ spin_lock(&dum->lock);
}
} else if (dum_hcd->active != dum_hcd->old_active) {
if (dum_hcd->old_active && dum->driver->suspend) {
- spin_unlock (&dum->lock);
- dum->driver->suspend (&dum->gadget);
- spin_lock (&dum->lock);
- } else if (!dum_hcd->old_active && dum->driver->resume) {
- spin_unlock (&dum->lock);
- dum->driver->resume (&dum->gadget);
- spin_lock (&dum->lock);
+ spin_unlock(&dum->lock);
+ dum->driver->suspend(&dum->gadget);
+ spin_lock(&dum->lock);
+ } else if (!dum_hcd->old_active && dum->driver->resume) {
+ spin_unlock(&dum->lock);
+ dum->driver->resume(&dum->gadget);
+ spin_lock(&dum->lock);
}
}

@@ -355,13 +425,17 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
dum = ep_to_dummy (ep);
if (!dum->driver)
return -ESHUTDOWN;
- dum_hcd = dum->hs_hcd;
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ dum_hcd = dum->ss_hcd;
+ else
+ dum_hcd = dum->hs_hcd;
if (!is_enabled(dum_hcd))
return -ESHUTDOWN;

/*
* For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
* maximum packet size.
+ * For SS devices the wMaxPacketSize is limited by 1024.
*/
max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;

@@ -381,6 +455,10 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
goto done;
}
switch (dum->gadget.speed) {
+ case USB_SPEED_SUPER:
+ if (max == 1024)
+ break;
+ goto done;
case USB_SPEED_HIGH:
if (max == 512)
break;
@@ -399,6 +477,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
goto done;
/* real hardware might not handle all packet sizes */
switch (dum->gadget.speed) {
+ case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
if (max <= 1024)
break;
@@ -419,6 +498,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
goto done;
/* real hardware might not handle all packet sizes */
switch (dum->gadget.speed) {
+ case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
if (max <= 1024)
break;
@@ -547,7 +627,10 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
return -EINVAL;

dum = ep_to_dummy (ep);
- dum_hcd = dum->hs_hcd;
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ dum_hcd = dum->ss_hcd;
+ else
+ dum_hcd = dum->hs_hcd;
if (!dum->driver || !is_enabled(dum_hcd))
return -ESHUTDOWN;

@@ -733,9 +816,12 @@ static int dummy_pullup (struct usb_gadget *_gadget, int value)
dum = gadget_to_dummy_hcd(_gadget)->dum;
spin_lock_irqsave (&dum->lock, flags);
dum->pullup = (value != 0);
- set_link_state(dum->hs_hcd);
+ set_link_state((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd : dum->hs_hcd));
spin_unlock_irqrestore (&dum->lock, flags);
- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum->hs_hcd));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dummy_hcd_to_hcd(dum->ss_hcd) :
+ dummy_hcd_to_hcd(dum->hs_hcd)));
return 0;
}

@@ -816,8 +902,21 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver,
}

dum->gadget.ep0 = &dum->ep [0].ep;
- dum->gadget.speed = min((u8)driver->speed, (u8)USB_SPEED_HIGH) ;
- dum->ep[0].ep.maxpacket = 64;
+ if (mod_data.is_super_speed)
+ dum->gadget.speed = driver->speed;
+ else
+ dum->gadget.speed = min((u8)USB_SPEED_HIGH, (u8)driver->speed);
+ if (dum->gadget.speed < driver->speed)
+ dev_dbg(udc_dev(dum), "This device can perform faster if"
+ " you connect it to a "
+ "SupeSpeed port...\n");
+
+ if (dum->gadget.speed == USB_SPEED_SUPER) {
+ for (i = 0; i < DUMMY_ENDPOINTS; i++)
+ dum->ep[i].ep.max_streams = 0x10;
+ dum->ep[0].ep.maxpacket = 9;
+ } else
+ dum->ep[0].ep.maxpacket = 64;
list_del_init (&dum->ep [0].ep.ep_list);
INIT_LIST_HEAD(&dum->fifo_req.queue);

@@ -836,12 +935,21 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver,
/* khubd will enumerate this in a while */
spin_lock_irq (&dum->lock);
dum->pullup = 1;
- dum->gadget.is_otg =
- (dummy_hcd_to_hcd(dum->hs_hcd)->self.otg_port != 0);
- set_link_state(dum->hs_hcd);
+ if (dum->gadget.speed == USB_SPEED_SUPER) {
+ dum->gadget.is_otg =
+ (dummy_hcd_to_hcd(dum->ss_hcd)->self.otg_port != 0);
+ set_link_state(dum->ss_hcd);
+ } else {
+ dum->gadget.is_otg =
+ (dummy_hcd_to_hcd(dum->hs_hcd)->self.otg_port != 0);
+ set_link_state(dum->hs_hcd);
+ }
+
spin_unlock_irq (&dum->lock);

- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum->hs_hcd));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dummy_hcd_to_hcd(dum->ss_hcd) :
+ dummy_hcd_to_hcd(dum->hs_hcd)));
return 0;
}
EXPORT_SYMBOL(usb_gadget_probe_driver);
@@ -862,18 +970,21 @@ usb_gadget_unregister_driver (struct usb_gadget_driver *driver)

spin_lock_irqsave (&dum->lock, flags);
dum->pullup = 0;
- set_link_state(dum->hs_hcd);
+ set_link_state((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd : dum->hs_hcd));
spin_unlock_irqrestore (&dum->lock, flags);

driver->unbind (&dum->gadget);
dum->gadget.dev.driver = NULL;
dum->driver = NULL;
-
spin_lock_irqsave (&dum->lock, flags);
dum->pullup = 0;
- set_link_state(dum->hs_hcd);
+ set_link_state((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd : dum->hs_hcd));
spin_unlock_irqrestore (&dum->lock, flags);
- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum->hs_hcd));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dummy_hcd_to_hcd(dum->ss_hcd) :
+ dummy_hcd_to_hcd(dum->hs_hcd)));
return 0;
}
EXPORT_SYMBOL (usb_gadget_unregister_driver);
@@ -941,10 +1052,13 @@ static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state)
dev_dbg (&pdev->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 1;
- set_link_state(dum->hs_hcd);
+ set_link_state((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd : dum->hs_hcd));
spin_unlock_irq (&dum->lock);

- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum->hs_hcd));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dummy_hcd_to_hcd(dum->ss_hcd) :
+ dummy_hcd_to_hcd(dum->hs_hcd)));
return 0;
}

@@ -955,10 +1069,13 @@ static int dummy_udc_resume (struct platform_device *pdev)
dev_dbg (&pdev->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 0;
- set_link_state(dum->hs_hcd);
+ set_link_state((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd : dum->hs_hcd));
spin_unlock_irq (&dum->lock);

- usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum->hs_hcd));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dummy_hcd_to_hcd(dum->ss_hcd) :
+ dummy_hcd_to_hcd(dum->hs_hcd)));
return 0;
}

@@ -1186,6 +1303,21 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
tmp *= 8 /* applies to entire frame */;
limit += limit * tmp;
}
+ if (dum->gadget.speed == USB_SPEED_SUPER) {
+ switch (ep->desc->bmAttributes & 0x03) {
+ case USB_ENDPOINT_XFER_ISOC:
+ /* Sec. 4.4.8.2 USB3.0 Spec */
+ limit = 3 * 16 * 1024 * 8;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ /* Sec. 4.4.7.2 USB3.0 Spec */
+ limit = 3 * 1024 * 8;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ default:
+ break;
+ }
+ }
return limit;
}

@@ -1198,7 +1330,8 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
{
int i;

- if (!is_active(dum->hs_hcd))
+ if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd : dum->hs_hcd)))
return NULL;
if ((address & ~USB_DIR_IN) == 0)
return &dum->ep [0];
@@ -1272,6 +1405,27 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
case USB_DEVICE_A_ALT_HNP_SUPPORT:
dum->gadget.a_alt_hnp_support = 1;
break;
+ case USB_DEVICE_U1_ENABLE:
+ if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+ HCD_USB3)
+ w_value = USB_DEV_STAT_U1_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_U2_ENABLE:
+ if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+ HCD_USB3)
+ w_value = USB_DEV_STAT_U2_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_LTM_ENABLE:
+ if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+ HCD_USB3)
+ w_value = USB_DEV_STAT_LTM_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
default:
ret_val = -EOPNOTSUPP;
}
@@ -1298,6 +1452,27 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
case USB_DEVICE_REMOTE_WAKEUP:
w_value = USB_DEVICE_REMOTE_WAKEUP;
break;
+ case USB_DEVICE_U1_ENABLE:
+ if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+ HCD_USB3)
+ w_value = USB_DEV_STAT_U1_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_U2_ENABLE:
+ if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+ HCD_USB3)
+ w_value = USB_DEV_STAT_U2_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_LTM_ENABLE:
+ if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+ HCD_USB3)
+ w_value = USB_DEV_STAT_LTM_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
default:
ret_val = -EOPNOTSUPP;
break;
@@ -1379,6 +1554,10 @@ static void dummy_timer(unsigned long _dum_hcd)
case USB_SPEED_HIGH:
total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
break;
+ case USB_SPEED_SUPER:
+ /* Bus speed is 500000 bytes/ms, so use a little less */
+ total = 490000;
+ break;
default:
dev_err(dummy_dev(dum_hcd), "bogus device speed\n");
return;
@@ -1613,6 +1792,18 @@ done:
}

static inline void
+ss_hub_descriptor(struct usb_hub_descriptor *desc)
+{
+ memset(desc, 0, sizeof *desc);
+ desc->bDescriptorType = 0x2a;
+ desc->bDescLength = 12;
+ desc->wHubCharacteristics = cpu_to_le16(0x0001);
+ desc->bNbrPorts = 1;
+ desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
+ desc->u.ss.DeviceRemovable = 0xffff;
+}
+
+static inline void
hub_descriptor (struct usb_hub_descriptor *desc)
{
memset (desc, 0, sizeof *desc);
@@ -1648,6 +1839,12 @@ static int dummy_hub_control (
case ClearPortFeature:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
+ if (hcd->speed == HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_SUSPEND req not "
+ "supported for USB 3.0 roothub\n");
+ goto error;
+ }
if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) {
/* 20msec resume signaling */
dum_hcd->resuming = 1;
@@ -1656,8 +1853,15 @@ static int dummy_hub_control (
}
break;
case USB_PORT_FEAT_POWER:
- if (dum_hcd->port_status & USB_PORT_STAT_POWER)
- dev_dbg(dummy_dev(dum_hcd), "power-off\n");
+ if (hcd->speed == HCD_USB3) {
+ if (dum_hcd->port_status & USB_PORT_STAT_POWER)
+ dev_dbg(dummy_dev(dum_hcd),
+ "power-off\n");
+ } else
+ if (dum_hcd->port_status &
+ USB_SS_PORT_STAT_POWER)
+ dev_dbg(dummy_dev(dum_hcd),
+ "power-off\n");
/* FALLS THROUGH */
default:
dum_hcd->port_status &= ~(1 << wValue);
@@ -1665,7 +1869,18 @@ static int dummy_hub_control (
}
break;
case GetHubDescriptor:
- hub_descriptor((struct usb_hub_descriptor *) buf);
+ if (hcd->speed == HCD_USB3 &&
+ (wLength < USB_DT_SS_HUB_SIZE ||
+ wValue != (USB_DT_SS_HUB << 8))) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "Wrong hub descriptor type for "
+ "USB 3.0 roothub.\n");
+ goto error;
+ }
+ if (hcd->speed == HCD_USB3)
+ ss_hub_descriptor((struct usb_hub_descriptor *) buf);
+ else
+ hub_descriptor((struct usb_hub_descriptor *) buf);
break;
case GetHubStatus:
*(__le32 *) buf = cpu_to_le32 (0);
@@ -1688,21 +1903,24 @@ static int dummy_hub_control (
dum_hcd->port_status &= ~USB_PORT_STAT_RESET;
if (dum_hcd->dum->pullup) {
dum_hcd->port_status |= USB_PORT_STAT_ENABLE;
- switch (dum_hcd->dum->gadget.speed) {
- case USB_SPEED_HIGH:
- dum_hcd->port_status |=
- USB_PORT_STAT_HIGH_SPEED;
- break;
- case USB_SPEED_LOW:
- dum_hcd->dum->gadget.ep0->
- maxpacket = 8;
- dum_hcd->port_status |=
- USB_PORT_STAT_LOW_SPEED;
- break;
- default:
- dum_hcd->dum->gadget.speed =
- USB_SPEED_FULL;
- break;
+
+ if (hcd->speed < HCD_USB3) {
+ switch (dum_hcd->dum->gadget.speed) {
+ case USB_SPEED_HIGH:
+ dum_hcd->port_status |=
+ USB_PORT_STAT_HIGH_SPEED;
+ break;
+ case USB_SPEED_LOW:
+ dum_hcd->dum->gadget.ep0->
+ maxpacket = 8;
+ dum_hcd->port_status |=
+ USB_PORT_STAT_LOW_SPEED;
+ break;
+ default:
+ dum_hcd->dum->gadget.speed =
+ USB_SPEED_FULL;
+ break;
+ }
}
}
}
@@ -1715,7 +1933,36 @@ static int dummy_hub_control (
break;
case SetPortFeature:
switch (wValue) {
+ case USB_PORT_FEAT_LINK_STATE:
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_LINK_STATE req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /*
+ * Since this is dummy we don't have an actual link so
+ * there is nothing to do for the SET_LINK_STATE cmd
+ */
+ break;
+ case USB_PORT_FEAT_U1_TIMEOUT:
+ case USB_PORT_FEAT_U2_TIMEOUT:
+ /* TODO: add suspend/resume support! */
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_U1/2_TIMEOUT req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ break;
case USB_PORT_FEAT_SUSPEND:
+ /* Applicable only for USB2.0 hub */
+ if (hcd->speed == HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_SUSPEND req not "
+ "supported for USB 3.0 roothub\n");
+ goto error;
+ }
if (dum_hcd->active) {
dum_hcd->port_status |= USB_PORT_STAT_SUSPEND;

@@ -1730,12 +1977,31 @@ static int dummy_hub_control (
}
break;
case USB_PORT_FEAT_POWER:
- dum_hcd->port_status |= USB_PORT_STAT_POWER;
+ if (hcd->speed == HCD_USB3)
+ dum_hcd->port_status |= USB_SS_PORT_STAT_POWER;
+ else
+ dum_hcd->port_status |= USB_PORT_STAT_POWER;
set_link_state(dum_hcd);
break;
+ case USB_PORT_FEAT_BH_PORT_RESET:
+ /* Applicable only for USB3.0 hub */
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_BH_PORT_RESET req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /* FALLS THROUGH */
case USB_PORT_FEAT_RESET:
/* if it's already enabled, disable */
- dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE
+ if (hcd->speed == HCD_USB3) {
+ dum_hcd->port_status = 0;
+ dum_hcd->port_status =
+ (USB_SS_PORT_STAT_POWER |
+ USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_RESET);
+ } else
+ dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE
| USB_PORT_STAT_LOW_SPEED
| USB_PORT_STAT_HIGH_SPEED);
/*
@@ -1744,21 +2010,50 @@ static int dummy_hub_control (
*/
dum_hcd->dum->devstatus &=
(1 << USB_DEVICE_SELF_POWERED);
+ /*
+ * FIXME USB3.0: what is the correct reset signaling
+ * interval? Is it still 50msec as for HS?
+ */
dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
/* FALLS THROUGH */
default:
- if ((dum_hcd->port_status &
- USB_PORT_STAT_POWER) != 0) {
- dum_hcd->port_status |= (1 << wValue);
- set_link_state(dum_hcd);
- }
+ if (hcd->speed == HCD_USB3) {
+ if ((dum_hcd->port_status &
+ USB_SS_PORT_STAT_POWER) != 0) {
+ dum_hcd->port_status |= (1 << wValue);
+ set_link_state(dum_hcd);
+ }
+ } else
+ if ((dum_hcd->port_status &
+ USB_PORT_STAT_POWER) != 0) {
+ dum_hcd->port_status |= (1 << wValue);
+ set_link_state(dum_hcd);
+ }
+ }
+ break;
+ case GetPortErrorCount:
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "GetPortErrorCount req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /* We'll always return 0 since this is a dummy hub */
+ *(__le32 *) buf = cpu_to_le32(0);
+ break;
+ case SetHubDepth:
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "SetHubDepth req not supported for "
+ "USB 2.0 roothub\n");
+ goto error;
}
break;
-
default:
dev_dbg(dummy_dev(dum_hcd),
"hub control req%04x v%04x i%04x l%d\n",
typeReq, wValue, wIndex, wLength);
+error:
/* "protocol stall" on error */
retval = -EPIPE;
}
@@ -1825,6 +2120,9 @@ show_urb (char *buf, size_t size, struct urb *urb)
case USB_SPEED_HIGH:
s = "hs";
break;
+ case USB_SPEED_SUPER:
+ s = "ss";
+ break;
default:
s = "?";
break;
@@ -1871,6 +2169,25 @@ show_urbs (struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL);

+static int dummy_start_ss(struct dummy_hcd *dum_hcd)
+{
+ init_timer(&dum_hcd->timer);
+ dum_hcd->timer.function = dummy_timer;
+ dum_hcd->timer.data = (unsigned long)dum_hcd;
+ dum_hcd->rh_state = DUMMY_RH_RUNNING;
+ INIT_LIST_HEAD(&dum_hcd->urbp_list);
+ dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+ dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
+ dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
+#ifdef CONFIG_USB_OTG
+ dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1;
+#endif
+ return 0;
+
+ /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
+ return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
+}
+
static int dummy_start(struct usb_hcd *hcd)
{
struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
@@ -1880,6 +2197,9 @@ static int dummy_start(struct usb_hcd *hcd)
* talk to one device (the slave side). Also appears in sysfs,
* just like more familiar pci-based HCDs.
*/
+ if (!usb_hcd_is_primary_hcd(hcd))
+ return dummy_start_ss(dum_hcd);
+
spin_lock_init(&dum_hcd->dum->lock);
init_timer(&dum_hcd->timer);
dum_hcd->timer.function = dummy_timer;
@@ -1922,19 +2242,52 @@ static int dummy_setup(struct usb_hcd *hcd)
if (usb_hcd_is_primary_hcd(hcd)) {
the_controller.hs_hcd = hcd_to_dummy_hcd(hcd);
the_controller.hs_hcd->dum = &the_controller;
- /* Mark the first roothub as being USB 2.0. */
+ /*
+ * Mark the first roothub as being USB 2.0.
+ * The USB 3.0 roothub will be registered later by
+ * dummy_hcd_probe()
+ */
hcd->speed = HCD_USB2;
hcd->self.root_hub->speed = USB_SPEED_HIGH;
+ } else {
+ the_controller.ss_hcd = hcd_to_dummy_hcd(hcd);
+ the_controller.ss_hcd->dum = &the_controller;
+ hcd->speed = HCD_USB3;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER;
}
return 0;
}

-static const struct hc_driver dummy_hcd = {
+/* Change a group of bulk endpoints to support multiple stream IDs */
+int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags)
+{
+ if (hcd->speed != HCD_USB3)
+ dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)),
+ "%s() - ERROR! Not supported for USB2.0 roothub\n",
+ __func__);
+ return 0;
+}
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags)
+{
+ if (hcd->speed != HCD_USB3)
+ dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)),
+ "%s() - ERROR! Not supported for USB2.0 roothub\n",
+ __func__);
+ return 0;
+}
+
+static struct hc_driver dummy_hcd = {
.description = (char *) driver_name,
.product_desc = "Dummy host controller",
.hcd_priv_size = sizeof(struct dummy_hcd),

- .flags = HCD_USB2,
+ .flags = HCD_USB3 | HCD_SHARED,

.reset = dummy_setup,
.start = dummy_start,
@@ -1949,15 +2302,21 @@ static const struct hc_driver dummy_hcd = {
.hub_control = dummy_hub_control,
.bus_suspend = dummy_bus_suspend,
.bus_resume = dummy_bus_resume,
+
+ .alloc_streams = dummy_alloc_streams,
+ .free_streams = dummy_free_streams,
};

static int dummy_hcd_probe(struct platform_device *pdev)
{
struct usb_hcd *hs_hcd;
+ struct usb_hcd *ss_hcd;
int retval;

dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);

+ if (!mod_data.is_super_speed)
+ dummy_hcd.flags = HCD_USB2;
hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
if (!hs_hcd)
return -ENOMEM;
@@ -1965,8 +2324,28 @@ static int dummy_hcd_probe(struct platform_device *pdev)
retval = usb_add_hcd(hs_hcd, 0, 0);
if (retval != 0) {
usb_put_hcd(hs_hcd);
- the_controller.hs_hcd = NULL;
+ return retval;
+ }
+
+ if (mod_data.is_super_speed) {
+ ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
+ dev_name(&pdev->dev), hs_hcd);
+ if (!ss_hcd) {
+ retval = -ENOMEM;
+ goto dealloc_usb2_hcd;
+ }
+
+ retval = usb_add_hcd(ss_hcd, 0, 0);
+ if (retval)
+ goto put_usb3_hcd;
}
+ return 0;
+
+put_usb3_hcd:
+ usb_put_hcd(ss_hcd);
+dealloc_usb2_hcd:
+ usb_put_hcd(hs_hcd);
+ the_controller.hs_hcd = the_controller.ss_hcd = NULL;
return retval;
}

@@ -1975,9 +2354,13 @@ static int dummy_hcd_remove (struct platform_device *pdev)
struct dummy *dum;

dum = (hcd_to_dummy_hcd(platform_get_drvdata(pdev)))->dum;
+ if (dum->ss_hcd) {
+ usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
+ usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
+ }
usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
- the_controller.hs_hcd = NULL;
+ the_controller.ss_hcd = the_controller.hs_hcd = NULL;
return 0;
}

@@ -2051,7 +2434,8 @@ static int __init init (void)
retval = platform_device_add(the_hcd_pdev);
if (retval < 0)
goto err_add_hcd;
- if (!the_controller.hs_hcd) {
+ if (!the_controller.hs_hcd ||
+ (!the_controller.ss_hcd && mod_data.is_super_speed)) {
/*
* The hcd was added successfully but its probe function failed
* for some reason.
--
1.7.3.3

--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/