Re: [09/35] ath9k: Fix suspend/resume when no interface is UP
From: Rajkumar Manoharan
Date: Mon Jul 11 2011 - 03:39:27 EST
On Sat, Jul 09, 2011 at 11:58:18AM -0400, Paul Gortmaker wrote:
> On Fri, Jul 8, 2011 at 6:49 PM, Greg KH <gregkh@xxxxxxx> wrote:
> > 2.6.32-longterm review patch. If anyone has any objections, please let us know.
> >
> > ------------------
> >
> > From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
> >
> > commit c31eb8e926835582cd186b33a7a864880a4c0c79 upstream.
> >
> > When no interface has been brought up, the chip's power
> > state continued as AWAKE. So during resume, the chip never
> > been powered up.
> >
> > Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
> > Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
> >
> > ---
> > drivers/net/wireless/ath/ath9k/pci.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > --- a/drivers/net/wireless/ath/ath9k/pci.c
> > +++ b/drivers/net/wireless/ath/ath9k/pci.c
> > @@ -276,6 +276,12 @@ static int ath_pci_resume(struct pci_dev
>
> This might warrant a double check. The original was patching the
> fullsleep into pci_suspend, not pci_resume, as is shown above here.
>
Thanks Paul for pointing out.
> > AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
> > ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
> >
> > + /* The device has to be moved to FULLSLEEP forcibly.
> > + * Otherwise the chip never moved to full sleep,
> > + * when no interface is up.
> > + */
> > + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
> > +
> > return 0;
> > }
> >
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/