[PATCH 2/3] Staging: comedi: fix warning: line over 80 character issue in das1800.c
From: Ravishankar
Date: Wed Jul 13 2011 - 10:25:20 EST
From: Ravishankar <ravi.shankar@xxxxxxxxxxxxxxx>
This is a patch to the das1800.c file that fixes up a warning: line over 80 character found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@xxxxxxxxx>
---
drivers/staging/comedi/drivers/das1800.c | 55 ++++++++++++++++++++---------
1 files changed, 38 insertions(+), 17 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index 639979b..ae07deb 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -678,7 +678,9 @@ static int das1800_attach(struct comedi_device *dev,
dev->board_ptr = das1800_boards + board;
dev->board_name = thisboard->name;
- /* if it is an 'ao' board with fancy analog out then we need extra io ports */
+ /* if it is an 'ao' board with fancy analog out
+ * then we need extra io ports
+ */
if (thisboard->ao_ability == 2) {
iobase2 = iobase + IOBASE2;
if (!request_region(iobase2, DAS1800_SIZE,
@@ -837,8 +839,8 @@ static int das1800_probe(struct comedi_device *dev)
{
int id;
int board;
-
- id = (inb(dev->iobase + DAS1800_DIGITAL) >> 4) & 0xf; /* get id bits */
+ /* get id bits */
+ id = (inb(dev->iobase + DAS1800_DIGITAL) >> 4) & 0xf;
board = ((struct das1800_board *)dev->board_ptr) - das1800_boards;
switch (id) {
@@ -969,7 +971,9 @@ static void das1800_ai_handler(struct comedi_device *dev)
outb(ADC, dev->iobase + DAS1800_SELECT);
/* dma buffer full */
if (devpriv->irq_dma_bits & DMA_ENABLED) {
- /* look for data from dma transfer even if dma terminal count hasn't happened yet */
+ /* look for data from dma transfer even if dma
+ * terminal count hasn't happened yet
+ */
das1800_handle_dma(dev, s, status);
} else if (status & FHF) { /* if fifo half full */
das1800_handle_fifo_half_full(dev, s);
@@ -993,7 +997,9 @@ static void das1800_ai_handler(struct comedi_device *dev)
if (status & CT0TC) {
/* clear CT0TC interrupt bit */
outb(CLEAR_INTR_MASK & ~CT0TC, dev->iobase + DAS1800_STATUS);
- /* make sure we get all remaining data from board before quitting */
+ /* make sure we get all remaining data
+ * from board before quitting
+ */
if (devpriv->irq_dma_bits & DMA_ENABLED)
das1800_flush_dma(dev, s);
else
@@ -1058,7 +1064,9 @@ static void munge_data(struct comedi_device *dev, uint16_t * array,
unsigned int i;
int unipolar;
- /* see if card is using a unipolar or bipolar range so we can munge data correctly */
+ /* see if card is using a unipolar or bipolar range
+ * so we can munge data correctly
+ */
unipolar = inb(dev->iobase + DAS1800_CONTROL_C) & UB;
/* convert to unsigned type if we are in a bipolar mode */
@@ -1099,8 +1107,9 @@ static void das1800_flush_dma_channel(struct comedi_device *dev,
return;
}
-/* flushes remaining data from board when external trigger has stopped acquisition
- * and we are using dma transfers */
+/* flushes remaining data from board when external trigger
+ * has stopped acquisition and we are using dma transfers
+ */
static void das1800_flush_dma(struct comedi_device *dev,
struct comedi_subdevice *s)
{
@@ -1178,9 +1187,12 @@ static void das1800_handle_fifo_not_empty(struct comedi_device *dev,
static int das1800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
- outb(0x0, dev->iobase + DAS1800_STATUS); /* disable conversions */
- outb(0x0, dev->iobase + DAS1800_CONTROL_B); /* disable interrupts and dma */
- outb(0x0, dev->iobase + DAS1800_CONTROL_A); /* disable and clear fifo and stop triggering */
+ /* disable conversions */
+ outb(0x0, dev->iobase + DAS1800_STATUS);
+ /* disable interrupts and dma */
+ outb(0x0, dev->iobase + DAS1800_CONTROL_B);
+ /* disable and clear fifo and stop triggering */
+ outb(0x0, dev->iobase + DAS1800_CONTROL_A);
if (devpriv->dma0)
disable_dma(devpriv->dma0);
if (devpriv->dma1)
@@ -1229,7 +1241,9 @@ static int das1800_ai_do_cmdtest(struct comedi_device *dev,
if (err)
return 1;
- /* step 2: make sure trigger sources are unique and mutually compatible */
+ /* step 2: make sure trigger sources are
+ * unique and mutually compatible
+ */
/* uniqueness check */
if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT)
@@ -1319,7 +1333,9 @@ static int das1800_ai_do_cmdtest(struct comedi_device *dev,
err++;
if (cmd->scan_begin_src == TRIG_TIMER) {
- /* if scans are timed faster than conversion rate allows */
+ /* if scans are timed faster than
+ * conversion rate allows
+ */
if (cmd->convert_arg * cmd->chanlist_len >
cmd->scan_begin_arg) {
cmd->scan_begin_arg =
@@ -1328,7 +1344,9 @@ static int das1800_ai_do_cmdtest(struct comedi_device *dev,
err++;
}
tmp_arg = cmd->scan_begin_arg;
- /* calculate counter values that give desired timing */
+ /* calculate counter values that
+ * give desired timing
+ */
i8253_cascade_ns_to_timer_2div(TIMER_BASE,
&(devpriv->
divisor1),
@@ -1524,14 +1542,17 @@ static void program_chanlist(struct comedi_device *dev, struct comedi_cmd cmd)
{
int i, n, chan_range;
unsigned long irq_flags;
- const int range_mask = 0x3; /* masks unipolar/bipolar bit off range */
+ /* masks unipolar/bipolar bit off range */
+ const int range_mask = 0x3;
const int range_bitshift = 8;
n = cmd.chanlist_len;
/* spinlock protects indirect addressing */
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(QRAM, dev->iobase + DAS1800_SELECT); /* select QRAM for baseAddress + 0x0 */
- outb(n - 1, dev->iobase + DAS1800_QRAM_ADDRESS); /*set QRAM address start */
+ /* select QRAM for baseAddress + 0x0 */
+ outb(QRAM, dev->iobase + DAS1800_SELECT);
+ /*set QRAM address start */
+ outb(n - 1, dev->iobase + DAS1800_QRAM_ADDRESS);
/* make channel / gain list */
for (i = 0; i < n; i++) {
chan_range =
--
1.6.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/