Re: [PATCH] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency

[Arnd Bergmann]

On Wednesday 13 July 2011, Manoj Iyer wrote:
> 
> Chris/Arnd,
> 
> Here is a series of test I did with the patched kernel.

> == cold boot insert SD card ==
> u@u:~/flash/flashbench$ sudo ./flashbench -O --erasesize=$[4 * 1024 * 
> 1024] --blocksize=$[256 * 1024] /dev/mmcblk0  --open-au-nr=2
> 4MiB    4.96M/s
> 2MiB    6.3M/s
> 1MiB    6.23M/s
> 512KiB  6.23M/s
> 256KiB  6.26M/s

The very first one obviously triggers a garbage collection.
Everything after that is well within measuring accuracy around 6.25MB/s

> On Wed, 13 Jul 2011, Chris Ball wrote:

> >
> > That makes sense.  Do you think this explains Manoj getting a slower
> > first file copy speed (757ms vs. 480ms) after applying his patch?
> > (Manoj, perhaps you could retry your test without GC being needed?)

Yes. For a single sample, it can easily explain differences up to 500ms.
You have to average out file system benchmarks across a lot of files
to be sure.

> > What would we expect lowering the SD base clock frequency from 200MHz
> > to 50MHz to do to performance theoretically?

Not much. This card only has a 6MB/s write speed, which is well below
what a 50 MHz bus can do. It mgiht be different on a fast eMMC device
or a Sandisk Extreme Pro UHS-1 card.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/