Re: [PATCH] input: Add Nintendo extension controller driver
From: Grant Likely
Date: Mon Aug 01 2011 - 12:05:11 EST
Hi Dmitry,
Any thoughts on this patch? Can you send it on to Linus?
Thanks,
g.
On Fri, May 27, 2011 at 9:14 AM, Grant Likely <grant.likely@xxxxxxxxxxxx> wrote:
> This driver adds support for Nintendo Wiimote extension controllers
> directly attached to an i2c bus, such as when using an adaptor like
> the Wiichuck.
>
> v3: - Fixed and tested classic controller connection
> - Fixed comment block
> v2: - Fixed DMA buffers on stack problem
> - added classic controller support
>
> Signed-off-by: Grant Likely <grant.likely@xxxxxxxxxxxx>
> ---
> I've actually got my hands on a classic controller now, so this driver
> has been tested with both nunchuck and classic controller. I leave adding
> support for the motionplus to someone who actually has the hardware. :)
>
> This driver should be ready for merging now.
>
> g.
>
> drivers/input/joystick/Kconfig | 13 +
> drivers/input/joystick/Makefile | 1
> drivers/input/joystick/wiichuck.c | 435 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 449 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/joystick/wiichuck.c
>
> diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
> index 56eb471..5b7fba7 100644
> --- a/drivers/input/joystick/Kconfig
> +++ b/drivers/input/joystick/Kconfig
> @@ -193,6 +193,19 @@ config JOYSTICK_TWIDJOY
> To compile this driver as a module, choose M here: the
> module will be called twidjoy.
>
> +config JOYSTICK_WIICHUCK
> + tristate "Nintendo Wiimote Extension connector on i2c bus"
> + depends on I2C
> + select INPUT_POLLDEV
> + help
> + Say Y here if you have a Nintendo Wiimote extension connector
> + attached directly to an i2c bus, like the Sparcfun Wiichuck adapter
> + board. This driver supports both the Nunchuck and the Classic
> + Controller extensions.
> +
> + To compile this driver as a module, choose M here: the
> + modules will be called wiichuck.
> +
> config JOYSTICK_ZHENHUA
> tristate "5-byte Zhenhua RC transmitter"
> select SERIO
> diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
> index 92dc0de..78466d6 100644
> --- a/drivers/input/joystick/Makefile
> +++ b/drivers/input/joystick/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_JOYSTICK_TMDC) += tmdc.o
> obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o
> obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
> obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o
> +obj-$(CONFIG_JOYSTICK_WIICHUCK) += wiichuck.o
> obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o
> obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o
> obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o
> diff --git a/drivers/input/joystick/wiichuck.c b/drivers/input/joystick/wiichuck.c
> new file mode 100644
> index 0000000..ab26c34b
> --- /dev/null
> +++ b/drivers/input/joystick/wiichuck.c
> @@ -0,0 +1,435 @@
> +/*
> + * i2c Wiichuck driver (Nintendo Wiimote accessory connector)
> + *
> + * This driver supports Nintendo Wiimote accessories like the Nunchuck and
> + * the Classic Controller connected to an i2c bus.
> + *
> + * Copyright (c) 2011 Secret Lab Technologies Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of version 2 of the GNU General Public License as
> + * published by the Free Software Foundation.
> + *
> + * This driver uses the polled input device abstraction to implement an
> + * input driver for Nintendo expansion devices wired up to an i2c bus.
> + *
> + * A state machine implements the protocol handling. It starts in the
> + * DISCONNECTED state initially and polls every second waiting for a
> + * device to get attached, and reading the device id when one does.
> + * If the device is recognized, then the polling period is bumped
> + * to 100ms, and the state machine enters into a loop reading the data
> + * capture reports out of the controller. If at any time the device
> + * is disconnected, then it goes back to DISCONNECTED state and bumps
> + * the polling frequency back to 1 second.
> + *
> + * A callback is implemented for each supported devices, currently the
> + * Nunchuck and the Classic Controller. Wii Motion Plus has yet to be
> + * added.
> + */
> +
> +#include <linux/cache.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/input.h>
> +#include <linux/input-polldev.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/slab.h>
> +
> +MODULE_AUTHOR("Grant Likely <grant.likely@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Wiichuck (i2c Nintendo Wiimote accessory) driver");
> +MODULE_LICENSE("GPL");
> +
> +#define WIICHUCK_POLL_PERIOD (1000) /* 1 second */
> +#ifdef DEBUG
> +#define WIICHUCK_CAPTURE_PERIOD (500) /* 1/2 second for debug */
> +#else
> +#define WIICHUCK_CAPTURE_PERIOD (100) /* 100 milliseconds */
> +#endif /* DEBUG */
> +
> +enum wiichuck_state {
> + WIICHUCK_STATE_DISCONNECTED = 0,
> + WIICHUCK_STATE_DATA,
> +};
> +
> +struct wiichuck_device {
> + struct input_polled_dev *poll_dev;
> + struct i2c_client *i2c_client;
> + int (*process)(struct wiichuck_device *wiichuck);
> + enum wiichuck_state state;
> +
> + /* transfer buffer, aligned to cache line so it can be used with DMA */
> + uint8_t buf[6] ____cacheline_aligned;
> +};
> +
> +static int wiichuck_transfer(struct wiichuck_device *wiichuck,
> + int len, bool read)
> +{
> + struct i2c_client *i2c = wiichuck->i2c_client;
> + struct i2c_msg msg = {
> + .addr = i2c->addr, .len = len, .buf = wiichuck->buf };
> +
> + if (read)
> + msg.flags = I2C_M_RD;
> + return i2c_transfer(i2c->adapter, &msg, 1);
> +}
> +
> +static int wiichuck_write(struct wiichuck_device *wiichuck,
> + uint8_t addr, uint8_t val)
> +{
> + wiichuck->buf[0] = addr;
> + wiichuck->buf[1] = val;
> + return wiichuck_transfer(wiichuck, 2, false);
> +}
> +
> +static inline int wiichuck_setaddr(struct wiichuck_device *wiichuck,
> + uint8_t addr)
> +{
> + wiichuck->buf[0] = addr;
> + return wiichuck_transfer(wiichuck, 1, false);
> +}
> +
> +static inline int wiichuck_read(struct wiichuck_device *wiichuck, int len)
> +{
> + return wiichuck_transfer(wiichuck, len, true);
> +}
> +
> +static inline bool WIIBTN(int val, int bit)
> +{
> + return (val & BIT(bit)) == 0;
> +}
> +
> +static int wiichuck_process_unknown(struct wiichuck_device *wiichuck)
> +{
> + return 0;
> +}
> +
> +static int wiichuck_process_nunchuck(struct wiichuck_device *wiichuck)
> +{
> + struct input_dev *input_dev = wiichuck->poll_dev->input;
> + uint8_t *b = wiichuck->buf;
> + int ax, ay, az, rc;
> +
> + rc = wiichuck_read(wiichuck, 6);
> + if (rc < 0)
> + return rc;
> +
> + ax = (b[2] << 2) | ((b[5] >> 2) & 0x3);
> + ay = (b[3] << 2) | ((b[5] >> 4) & 0x3);
> + az = (b[4] << 2) | ((b[5] >> 6) & 0x3);
> +
> + input_report_abs(input_dev, ABS_X, b[0]);
> + input_report_abs(input_dev, ABS_Y, b[1]);
> + input_report_abs(input_dev, ABS_RX, ax);
> + input_report_abs(input_dev, ABS_RY, ax);
> + input_report_abs(input_dev, ABS_RZ, ay);
> + input_report_key(input_dev, BTN_C, WIIBTN(b[5], 1));
> + input_report_key(input_dev, BTN_Z, WIIBTN(b[5], 0));
> + input_sync(input_dev);
> +
> + dev_dbg(&wiichuck->i2c_client->dev,
> + "nunchuck: j=%.3i,%.3i a=%.3x,%.3x,%.3x c,z=%i,%i\n",
> + b[0],b[1], ax,ay,az, WIIBTN(b[5], 1), WIIBTN(b[5], 0));
> + return 0;
> +};
> +
> +static int wiichuck_process_classic(struct wiichuck_device *wiichuck)
> +{
> + struct input_dev *input_dev = wiichuck->poll_dev->input;
> + uint8_t *b = wiichuck->buf;
> + int lx, ly, lt, rx, ry, rt, rc;
> +
> + rc = wiichuck_read(wiichuck, 6);
> + if (rc < 0)
> + return rc;
> +
> + /* Analog measurements; some values are split between registers */
> + rx = ((b[0] >> 3) & 0x18) | ((b[1] >> 5) & 6) | ((b[2] >> 7) & 1);
> + ry = b[2] & 0x1f;
> + rt = b[3] & 0x1f;
> + lx = b[0] & 0x3f;
> + ly = b[1] & 0x3f;
> + lt = ((b[2] >> 2) & 0x18) | ((b[3] >> 5) & 7);
> +
> + input_report_abs(input_dev, ABS_HAT0X, lx); /* left joystick */
> + input_report_abs(input_dev, ABS_HAT0Y, ly);
> + input_report_abs(input_dev, ABS_BRAKE, lt); /* left trigger */
> + input_report_abs(input_dev, ABS_HAT1X, rx); /* right joystick */
> + input_report_abs(input_dev, ABS_HAT1Y, ry);
> + input_report_abs(input_dev, ABS_GAS, rt); /* right trigger */
> +
> + /* D-pad */
> + input_report_abs(input_dev, ABS_HAT2X, WIIBTN(b[4],7) - WIIBTN(b[5],1));
> + input_report_abs(input_dev, ABS_HAT2Y, WIIBTN(b[4],6) - WIIBTN(b[5],0));
> +
> + /* Buttons */
> + input_report_key(input_dev, BTN_TL, WIIBTN(b[4], 5)); /* left trigger */
> + input_report_key(input_dev, BTN_SELECT, WIIBTN(b[4], 4)); /* minus */
> + input_report_key(input_dev, BTN_MODE, WIIBTN(b[4], 3)); /* home */
> + input_report_key(input_dev, BTN_START, WIIBTN(b[4], 2)); /* plus */
> + input_report_key(input_dev, BTN_TR, WIIBTN(b[4], 1)); /* right trigger */
> +
> + input_report_key(input_dev, BTN_TL2, WIIBTN(b[5], 7)); /* left z */
> + input_report_key(input_dev, BTN_B, WIIBTN(b[5], 6));
> + input_report_key(input_dev, BTN_Y, WIIBTN(b[5], 5));
> + input_report_key(input_dev, BTN_A, WIIBTN(b[5], 4));
> + input_report_key(input_dev, BTN_X, WIIBTN(b[5], 3));
> + input_report_key(input_dev, BTN_TR2, WIIBTN(b[5], 2)); /* right z */
> + input_sync(input_dev);
> +
> + dev_dbg(&wiichuck->i2c_client->dev,
> + "classic: r=%.3i,%.3i,%.3i l=%.3x,%.3x,%.3x b=%.2x,%.2x\n",
> + lx,ly,lt, rx,ry,rt, b[4],b[5]);
> + return 0;
> +};
> +
> +/**
> + * wiichuck_poll() - Protocol state machine implementation
> + *
> + * A state machine is used here to keep the protocol processing
> + * reentrant. Any of the i2c transactions will indeed sleep because
> + * i2c transactions are slow, but there is a mandatory delay between
> + * triggering the data capture (set address) and reading the data
> + * back. Using a state machine means the poll function can return and
> + * free up the worker thread while waiting for the data.
> + */
> +static void wiichuck_poll(struct input_polled_dev *poll_dev)
> +{
> + struct wiichuck_device *wiichuck = poll_dev->private;
> + int id;
> +
> + switch (wiichuck->state) {
> + case WIICHUCK_STATE_DISCONNECTED:
> + /* Disable encryption */
> + if (wiichuck_write(wiichuck, 0xf0, 0x55) < 0)
> + return;
> + if (wiichuck_write(wiichuck, 0xfb, 0x00) < 0)
> + return;
> +
> + /* Read device id */
> + if (wiichuck_setaddr(wiichuck, 0xfe) < 0)
> + return;
> + if (wiichuck_read(wiichuck, 2) < 0)
> + return;
> + id = (wiichuck->buf[0] << 8) | wiichuck->buf[1];
> +
> + switch (id) {
> + case 0x0000: /* Nunchuck */
> + wiichuck->process = wiichuck_process_nunchuck;
> + dev_info(&wiichuck->i2c_client->dev,
> + "Connected Nunchuck\n");
> + break;
> +
> + case 0x0101: /* Classic Controller */
> + wiichuck->process = wiichuck_process_classic;
> + dev_info(&wiichuck->i2c_client->dev,
> + "Connected Classic Controller\n");
> + break;
> +
> + default: /* No connection or unsupported device */
> + wiichuck->process = wiichuck_process_unknown;
> + dev_dbg(&wiichuck->i2c_client->dev,
> + "Connected unknown id: %x\n", id);
> + return;
> + }
> +
> + /* Setup the first data transfer */
> + if (wiichuck_setaddr(wiichuck, 0) < 0)
> + return;
> +
> + wiichuck->state = WIICHUCK_STATE_DATA;
> + poll_dev->poll_interval = WIICHUCK_CAPTURE_PERIOD;
> + break;
> +
> + case WIICHUCK_STATE_DATA:
> + /* Read the input report */
> + if (wiichuck->process(wiichuck) < 0)
> + goto disconnect;
> +
> + /* Setup the next transfer */
> + if (wiichuck_setaddr(wiichuck, 0) < 0)
> + goto disconnect;
> + break;
> +
> + default:
> + goto disconnect;
> + }
> + return;
> +
> + disconnect:
> + dev_info(&wiichuck->i2c_client->dev, "disconnected\n");
> + wiichuck->state = WIICHUCK_STATE_DISCONNECTED;
> + poll_dev->poll_interval = WIICHUCK_POLL_PERIOD;
> +}
> +
> +/**
> + * wiichuck_open() - Set up initial state machine state
> + *
> + * Called exactly once the first time the device is opened by
> + * userspace. Will not be called again unless all users close it
> + * before reopening. This simply clears the state to disconnected and
> + * sets the poll rate back to the slow speed
> + */
> +static void wiichuck_open(struct input_polled_dev *poll_dev)
> +{
> + struct wiichuck_device *wiichuck = poll_dev->private;
> +
> + wiichuck->process = wiichuck_process_unknown;
> + wiichuck->state = WIICHUCK_STATE_DISCONNECTED;
> + wiichuck->poll_dev->poll_interval = WIICHUCK_POLL_PERIOD;
> +}
> +
> +static int __devinit wiichuck_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct wiichuck_device *wiichuck;
> + struct input_polled_dev *poll_dev;
> + struct input_dev *input_dev;
> + int rc;
> +
> + wiichuck = kzalloc(sizeof(*wiichuck), GFP_KERNEL);
> + if (!wiichuck)
> + return -ENOMEM;
> +
> + poll_dev = input_allocate_polled_device();
> + if (!poll_dev) {
> + rc = -ENOMEM;
> + goto err_alloc;
> + }
> +
> + wiichuck->i2c_client = client;
> + wiichuck->poll_dev = poll_dev;
> +
> + poll_dev->private = wiichuck;
> + poll_dev->poll = wiichuck_poll;
> + poll_dev->open = wiichuck_open;
> +
> + input_dev = poll_dev->input;
> + input_dev->name = "Wiichuck expansion connector";
> + input_dev->id.bustype = BUS_I2C;
> + input_dev->dev.parent = &client->dev;
> +
> + /* Declare the events generated by this driver */
> + __set_bit(EV_ABS, input_dev->evbit);
> + __set_bit(EV_KEY, input_dev->evbit);
> +
> + /* Nunchuck ranges */
> + __set_bit(ABS_X, input_dev->absbit); /* joystick */
> + __set_bit(ABS_Y, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_X, 30, 220, 4, 8);
> + input_set_abs_params(input_dev, ABS_Y, 40, 200, 4, 8);
> +
> + __set_bit(ABS_RX, input_dev->absbit); /* accelerometer */
> + __set_bit(ABS_RY, input_dev->absbit);
> + __set_bit(ABS_RZ, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_RX, 0, 0x3ff, 4, 8);
> + input_set_abs_params(input_dev, ABS_RY, 0, 0x3ff, 4, 8);
> + input_set_abs_params(input_dev, ABS_RZ, 0, 0x3ff, 4, 8);
> +
> + /* Nunchuck buttons */
> + __set_bit(BTN_C, input_dev->keybit);
> + __set_bit(BTN_Z, input_dev->keybit);
> +
> + /* Classic ranges */
> + __set_bit(ABS_HAT0X, input_dev->absbit); /* Left Joystick */
> + __set_bit(ABS_HAT0Y, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_HAT0X, 0, 63, 2, 4);
> + input_set_abs_params(input_dev, ABS_HAT0Y, 0, 63, 2, 4);
> +
> + __set_bit(ABS_HAT1X, input_dev->absbit); /* Right Joystick */
> + __set_bit(ABS_HAT1Y, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_HAT1X, 0, 31, 1, 2);
> + input_set_abs_params(input_dev, ABS_HAT1Y, 0, 31, 1, 2);
> +
> + __set_bit(ABS_HAT2X, input_dev->absbit); /* D-pad */
> + __set_bit(ABS_HAT2Y, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_HAT2X, -1, 1, 0, 0);
> + input_set_abs_params(input_dev, ABS_HAT2Y, -1, 1, 0, 0);
> +
> + __set_bit(ABS_BRAKE, input_dev->absbit); /* Left trigger */
> + input_set_abs_params(input_dev, ABS_BRAKE, 0, 31, 1, 2);
> + __set_bit(ABS_GAS, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_GAS, 0, 31, 1, 2);
> +
> + /* Classic buttons */
> + __set_bit(BTN_TL, input_dev->keybit);
> + __set_bit(BTN_SELECT, input_dev->keybit);
> + __set_bit(BTN_MODE, input_dev->keybit);
> + __set_bit(BTN_START, input_dev->keybit);
> + __set_bit(BTN_TR, input_dev->keybit);
> + __set_bit(BTN_TL2, input_dev->keybit);
> + __set_bit(BTN_B, input_dev->keybit);
> + __set_bit(BTN_Y, input_dev->keybit);
> + __set_bit(BTN_A, input_dev->keybit);
> + __set_bit(BTN_X, input_dev->keybit);
> + __set_bit(BTN_TR2, input_dev->keybit);
> +
> + i2c_set_clientdata(client, wiichuck);
> +
> + /* Register the device; it is 'live' after this point */
> + rc = input_register_polled_device(wiichuck->poll_dev);
> + if (rc) {
> + dev_err(&client->dev, "Failed to register input device\n");
> + goto err_register;
> + }
> +
> + return 0;
> +
> + err_register:
> + i2c_set_clientdata(client, NULL);
> + input_free_polled_device(poll_dev);
> + err_alloc:
> + kfree(wiichuck);
> +
> + return rc;
> +}
> +
> +static int __devexit wiichuck_remove(struct i2c_client *client)
> +{
> + struct wiichuck_device *wiichuck = i2c_get_clientdata(client);
> +
> + i2c_set_clientdata(client, NULL);
> + input_unregister_polled_device(wiichuck->poll_dev);
> + input_free_polled_device(wiichuck->poll_dev);
> + kfree(wiichuck);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id wiichuck_id[] = {
> + { "wiichuck", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, wiichuck_id);
> +
> +#ifdef CONFIG_OF
> +static struct of_device_id wiichuck_match_table[] __devinitdata = {
> + { .compatible = "nintendo,wiimote-extension", },
> + { }
> +};
> +#else
> +#define wiichuck_match_table NULL
> +#endif
> +
> +static struct i2c_driver wiichuck_driver = {
> + .driver = {
> + .name = "wiichuck",
> + .owner = THIS_MODULE,
> + .of_match_table = wiichuck_match_table,
> + },
> + .probe = wiichuck_probe,
> + .remove = __devexit_p(wiichuck_remove),
> + .id_table = wiichuck_id,
> +};
> +
> +static int __init wiichuck_init(void)
> +{
> + return i2c_add_driver(&wiichuck_driver);
> +}
> +module_init(wiichuck_init);
> +
> +static void __exit wiichuck_exit(void)
> +{
> + i2c_del_driver(&wiichuck_driver);
> +}
> +module_exit(wiichuck_exit);
>
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/