uses of irq_to_gpio() in drivers/staging/iio

[Ben Dooks]

Whilst looking in drivers/staging/iio/accel/lis3l02dq_core.c, I
came across the following lines of code

   708          if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
   709                  ret = request_threaded_irq(st->us->irq,
   710                                             &lis3l02dq_th,
   711 
&lis3l02dq_event_handler,
   712                                             IRQF_TRIGGER_RISING,
   713                                             "lis3l02dq",
   714                                             indio_dev);

Which gives rise to the following questions:

1) IRQ0 and GPIO0 are often valid numbers for GPIOs.

2) Not all interrupts are necessarily GPIO interrupts. What happens
   if the device is attached to a hardware interrupt line which is
   not a GPIO?

--
Ben Dooks <bjdooks@xxxxxxxxxxxxxx> http://www.fluff.org/ben/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/