Re: [BUG] 3.0-rc1 Bridge not forwarding unicast packages
From: Michael Guntsche
Date: Mon Aug 08 2011 - 14:03:06 EST
On 08 Aug 11 10:48, Stephen Hemminger wrote:
> On Mon, 8 Aug 2011 19:42:19 +0200
> Michael Guntsche <mike@xxxxxxxxxxxx> wrote:
> > Hi list,
> > I just upgraded my router/bridge combo to 3.1-rc1 from 3.0 for
> > testing. On a first look everything seemed to work fine, but when I
> > tried to connect via openvpn to my internal network (tap0 being bridged
> > with the internal network) I noticed that I was not able to access the
> > server on my internal network. I could access the bridge (which is
> > acting as the openvpn server as well) just fine though.
> > To debug this I ran tcpdump on the openvpn client and started a ping to the
> > internal network. I could see the ARP requests being answered.
> > 19:23:49.247846 ARP, Request who-has 192.168.42.127 tell 192.168.42.96,
> > length 28
> > 19:23:49.287752 ARP, Reply 192.168.42.127 is-at 00:13:d4:4f:a2:dc,
> > length 46
> > in this case .127 is the server on the internal net and .96 the openvpn
> > client, but the icmp request did not arrive on the server.
> > The strange thing I noticed was that I could see broadcasts packages
> > from the server on the client
> > 19:23:28.135185 IP 192.168.42.127.631 > 192.168.42.255.631: UDP, length
> > 187
> > 19:23:29.470975 IP 192.168.42.96.5353 > 188.8.131.52.5353: .......
> > but no icmp packages arrived on the server side.
> > brctl showmacs lan
> > port no mac addr is local? ageing timer
> > 1 00:0c:42:28:de:4e yes 0.00
> > 2 00:0c:42:61:7f:f2 yes 0.00
> > 1 00:13:d4:4f:a2:dc no 0.00 <---- server on the lan side
> > 3 8e:22:41:d9:95:23 yes 0.00
> > 3 b6:e1:e3:06:c9:1a no 5.00 <---- client connected via tap0
> > Reverting to 3.0 solves the problem for me. I tried just reverting the bridge code on the server to the 3.0 version to make sure that it is really Bridge related, but there are too many changes outside the bridge tree so compilation fails for me.
> > If you need more information, please to not hesitate to conact me.
> > Kind regards,
> > Michael Guntsche
> Do you have spanning tree enabled?
> If so you may have a packet loop and now it is being detected.
No STP is not enabled
brctl show lan
bridge name bridge id STP enabled interfaces
lan 8000.000c4228de4e no lan_wire
No ebtables rules either just checked that.
Is there a way to revert just the bridge code to the 3.0 version so i can make sure it is really the bridge code, and not something else?
PS: And of COURSE the subject line should be 3.1-rc1!!!! Sorry
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/