Re: [Bug 41622] [REGRESSION][BISECTED] Notebook crashes upondetecting the PCI subsystem with kernels >= 2.6.24-rc7

From: RogÃrio Brito
Date: Thu Aug 25 2011 - 10:49:43 EST

Next message: Pavel Emelyanov: "Re: [RFC] fs, proc: Introduce the /proc/<pid>/map_files/ directoryv2"
Previous message: Peter Zijlstra: "Re: perf: overflow signal survives an exec call starting in 3.0"
In reply to: Bjorn Helgaas: "Re: [Bug 41622] [REGRESSION][BISECTED] Notebook crashes upondetecting the PCI subsystem with kernels >= 2.6.24-rc7"
Next in thread: Bjorn Helgaas: "Re: [Bug 41622] [REGRESSION][BISECTED] Notebook crashes upondetecting the PCI subsystem with kernels >= 2.6.24-rc7"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi everybody.

2011/8/24 Bjorn Helgaas <bhelgaas@xxxxxxxxxx>:
>> If there is anything else that you would like me to change or to
>> provide any extra information, then please let me know and I will do
>> my best.
>
> I'd still like to see a dmesg log with no arguments (remove the
> "acpi=off pnpbios=off noapic nolapic" arguments). ÂYour machine is new
> enough that we'll use PCI _CRS by default, and I'd like to make sure
> we're doing the right thing.

OK. I put them there one by one, but let me report what I get with
those disabled, but *with* that small patch applied:

* "acpi=off pnpbios=off noapic": it works well, no problems with
dropping the nolapic.
* "acpi=off noapic": it works well, with no problems dropping
"pnpbios=off, aside from the "[Firmware Bug]: powernow-k8: No PSB or
ACPI _PSS objects" message.
* "acpi=off": does not work well---it books OK, but some accesses to
disk get very long and I get the following in the dmesg log:

[ 243.389359] ata1: EH in SWNCQ mode,QC:qc_active 0x7 sactive 0x7
[ 243.389367] ata1: SWNCQ:qc_active 0x3 defer_bits 0x4 last_issue_tag 0x1
[ 243.389368] dhfis 0x3 dmafis 0x0 sdbfis 0x0
[ 243.389374] ata1: ATA_REG 0x40 ERR_REG 0x0
[ 243.389377] ata1: tag : dhfis dmafis sdbfis sactive
[ 243.389380] ata1: tag 0x0: 1 0 0 1
[ 243.389383] ata1: tag 0x1: 1 0 0 1
[ 243.389398] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen
[ 243.389403] ata1.00: failed command: READ FPDMA QUEUED
[ 243.389411] ata1.00: cmd 60/08:00:c9:10:be/00:00:07:00:00/40 tag 0
ncq 4096 in
[ 243.389413] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 243.389417] ata1.00: status: { DRDY }
[ 243.389420] ata1.00: failed command: READ FPDMA QUEUED
[ 243.389428] ata1.00: cmd 60/08:08:19:10:be/00:00:07:00:00/40 tag 1
ncq 4096 in
[ 243.389430] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 243.389433] ata1.00: status: { DRDY }
[ 243.389437] ata1.00: failed command: WRITE FPDMA QUEUED
[ 243.389444] ata1.00: cmd 61/58:10:79:4f:62/00:00:06:00:00/40 tag 2
ncq 45056 out
[ 243.389446] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 243.389450] ata1.00: status: { DRDY }
[ 243.389457] ata1: hard resetting link
[ 243.389460] ata1: nv: skipping hardreset on occupied port
[ 244.289547] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 244.306186] Clocksource tsc unstable (delta = 429752755 ns)
[ 244.306214] Switching to clocksource jiffies
[ 244.309862] ata1.00: configured for UDMA/100
[ 244.309862] ata1.00: device reported invalid CHS sector 0
[ 244.309862] ata1.00: device reported invalid CHS sector 0
[ 244.309862] ata1.00: device reported invalid CHS sector 0
[ 244.309862] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 244.309862] sd 0:0:0:0: [sda] Sense Key : Aborted Command
[current] [descriptor]
[ 244.309862] Descriptor sense data with sense descriptors (in hex):
[ 244.309862] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 244.309862] 00 00 00 00
[ 244.309862] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 244.309862] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 07 be 10 c9 00 00 08 00
[ 244.309862] end_request: I/O error, dev sda, sector 129896649
[ 244.309862] ata1: EH complete
[ 293.834434] ata1: EH in SWNCQ mode,QC:qc_active 0x7FF sactive 0x7FF
[ 293.834442] ata1: SWNCQ:qc_active 0x1F defer_bits 0x7E0 last_issue_tag 0x4
[ 293.834444] dhfis 0x1F dmafis 0x0 sdbfis 0x0
[ 293.834449] ata1: ATA_REG 0x40 ERR_REG 0x0
[ 293.834452] ata1: tag : dhfis dmafis sdbfis sactive
[ 293.834456] ata1: tag 0x0: 1 0 0 1
[ 293.834459] ata1: tag 0x1: 1 0 0 1
[ 293.834462] ata1: tag 0x2: 1 0 0 1
[ 293.834465] ata1: tag 0x3: 1 0 0 1
[ 293.834468] ata1: tag 0x4: 1 0 0 1
[ 293.834483] ata1.00: exception Emask 0x0 SAct 0x7ff SErr 0x0 action
0x6 frozen
[ 293.834488] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834496] ata1.00: cmd 61/80:00:49:eb:6e/00:00:06:00:00/40 tag 0
ncq 65536 out
[ 293.834498] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 293.834502] ata1.00: status: { DRDY }
[ 293.834505] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834513] ata1.00: cmd 61/00:08:c9:f2:6e/02:00:06:00:00/40 tag 1
ncq 262144 out
[ 293.834515] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 293.834518] ata1.00: status: { DRDY }
[ 293.834522] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834530] ata1.00: cmd 61/c8:10:c9:f5:6e/01:00:06:00:00/40 tag 2
ncq 233472 out
[ 293.834531] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
(...)
[ 395.538669] ata1: tag 0x9: 1 0 0 1
[ 395.538672] ata1: tag 0xa: 1 0 0 1
[ 395.538675] ata1: tag 0xb: 1 0 0 1
[ 395.538678] ata1: tag 0xc: 1 0 0 1
[ 395.538681] ata1: tag 0xd: 1 0 0 1
[ 395.538684] ata1: tag 0xe: 0 0 0 1
[ 395.538697] ata1.00: NCQ disabled due to excessive errors
[ 395.538703] ata1.00: exception Emask 0x0 SAct 0x7fe00 SErr 0x0
action 0x6 frozen
[ 395.538708] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538717] ata1.00: cmd 61/80:48:49:34:8e/00:00:06:00:00/40 tag 9
ncq 65536 out
[ 395.538718] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538722] ata1.00: status: { DRDY }
[ 395.538725] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538733] ata1.00: cmd 61/00:50:c9:37:8e/01:00:06:00:00/40 tag 10
ncq 131072 out
[ 395.538735] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538739] ata1.00: status: { DRDY }
[ 395.538742] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538749] ata1.00: cmd 61/80:58:b9:37:7b/00:00:06:00:00/40 tag 11
ncq 65536 out
[ 395.538751] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538755] ata1.00: status: { DRDY }
[ 395.538758] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538766] ata1.00: cmd 61/08:60:c9:18:8e/00:00:06:00:00/40 tag 12
ncq 4096 out
[ 395.538767] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538771] ata1.00: status: { DRDY }
[ 395.538774] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538782] ata1.00: cmd 61/40:68:89:43:8e/00:00:06:00:00/40 tag 13
ncq 32768 out
[ 395.538783] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538787] ata1.00: status: { DRDY }
[ 395.538790] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538798] ata1.00: cmd 61/08:70:d9:ff:6e/00:00:06:00:00/40 tag 14
ncq 4096 out
[ 395.538800] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538803] ata1.00: status: { DRDY }
[ 395.538806] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538814] ata1.00: cmd 61/08:78:a9:34:6a/00:00:06:00:00/40 tag 15
ncq 4096 out
[ 395.538816] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538819] ata1.00: status: { DRDY }
[ 395.538822] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538830] ata1.00: cmd 61/10:80:71:d7:6f/00:00:06:00:00/40 tag 16
ncq 8192 out
[ 395.538832] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538835] ata1.00: status: { DRDY }
[ 395.538839] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538846] ata1.00: cmd 61/08:88:61:ff:6d/00:00:06:00:00/40 tag 17
ncq 4096 out
[ 395.538848] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538852] ata1.00: status: { DRDY }
[ 395.538855] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538862] ata1.00: cmd 61/08:90:e9:62:62/01:00:06:00:00/40 tag 18
ncq 135168 out
[ 395.538864] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 395.538868] ata1.00: status: { DRDY }
[ 395.538874] ata1: hard resetting link
[ 395.538877] ata1: nv: skipping hardreset on occupied port
[ 396.005559] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 396.025796] ata1.00: configured for UDMA/100
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1: EH complete

During that, the computer is frozen (well, not actually, the trackpad
is able to move the mouse). For all the details, please see the full
dmesg attached to this mail. After that, it seems that I can use the
computer and it doesn't happen anymore, but I get a a very high (98+%
of time) amount of hardware interrupts happening while I am using X
(not sure yet when I quit X). See the attached /proc/interrupts.

* without any boot options: without "acpi=off", the machine just hangs
at (hand copied, but photographed, if you want it):

(...)
CPU: Mobile AMD Sempron (tm) Processor 3400+ stepping 02
ACPI: Core revision 20110623

And nothing else happens.

> I assume that with no arguments, you still need the "skip transparent
> bridge sizing" change to boot.
>
> I don't really like that change because in __pci_bus_size_bridges(),
> it's not obvious why sizing transparent bridges should be a problem.
> If growing transparent bridge windows makes us run out of space, let's
> put the smarts ("this bridge is transparent, we can take advantage of
> subtractive decode so we may not need to grow the positive decode
> windows") at the point where we grow, not at the point where we size.
> If we do have enough space, growing the positive decode windows is
> better because they're faster than subtractive decode.

I'm afraid that I have understood almost nothing of what you just said
:-), but I will try to read some of the code.

Oh, Linux, all this is with "CONFIG_PCI_DEBUG=y" since the very first beginning.

Thanks,

--
RogÃrio Brito : rbrito@{ime.usp.br,gmail.com} : GPG key 4096R/BCFCAAAA
http://rb.doesntexist.org : Packages for LaTeX : algorithms.berlios.de
DebianQA: http://qa.debian.org/developer.php?login=rbrito%40ime.usp.br
[ 0.000000] Linux version 3.1.0-rc3+ (marcia@marcia-desktop) (gcc version 4.6.1 (Debian 4.6.1-7) ) #24 Thu Aug 25 10:53:35 BRT 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf10000 (usable)
[ 0.000000] BIOS-e820: 000000007bf10000 - 000000007bf18000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bf18000 - 000000007bf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bf80000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: CLEVO M5X0JE /M5X0JE , BIOS 2005Q2 03/10/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7bf10 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f8260] f8260
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 379fc000 - 37cf6000
[ 0.000000] Allocated new RAMDISK: 37702000 - 379fb5b5
[ 0.000000] Move RAMDISK from 00000000379fc000 - 0000000037cf55b4 to 37702000 - 379fb5b4
[ 0.000000] 1091MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0007bf10
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007bf10
[ 0.000000] On node 0 totalpages: 507549
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2183 pages used for memmap
[ 0.000000] HighMem zone: 277131 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: nVIDIA
[ 0.000000] MPTABLE: Product ID: C51-MCP51
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 1
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503582
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc3+ root=UUID=92b6c2a8-b801-4435-b8b3-f36ad6a17a69 ro acpi=off
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007bf10)
[ 0.000000] Memory: 2006108k/2030656k available (1830k kernel code, 24088k reserved, 1179k data, 300k init, 1117256k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc12f1000 - 0xc133c000 ( 300 kB)
[ 0.000000] .data : 0xc11c9895 - 0xc12f0620 (1179 kB)
[ 0.000000] .text : 0xc1000000 - 0xc11c9895 (1830 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:288
[ 0.000000] CPU 0 irqstacks, hard=f600e000 soft=f6010000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1808.641 MHz processor.
[ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 3618.00 BogoMIPS (lpj=6028803)
[ 0.006800] pid_max: default: 32768 minimum: 301
[ 0.006920] Mount-cache hash table entries: 512
[ 0.007102] mce: CPU supports 5 MCE banks
[ 0.007176] using AMD E400 aware idle routine
[ 0.007246] CPU: Mobile AMD Sempron(tm) Processor 3400+ stepping 02
[ 0.007447] Performance Events: AMD PMU driver.
[ 0.007558] ... version: 0
[ 0.007621] ... bit width: 48
[ 0.007685] ... generic registers: 4
[ 0.007748] ... value mask: 0000ffffffffffff
[ 0.007814] ... max period: 00007fffffffffff
[ 0.007879] ... fixed-purpose events: 0
[ 0.007942] ... event mask: 000000000000000f
[ 0.008166] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.008248] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.010079] ExtINT not setup in hardware but reported by MP table
[ 0.010625] ..TIMER: vector=0x30 apic1=-1 pin1=-1 apic2=0 pin2=0
[ 0.150092] devtmpfs: initialized
[ 0.150252] PM: Registering ACPI NVS region at 7bf18000 (425984 bytes)
[ 0.150389] RTC time: 11:11:27, date: 08/25/11
[ 0.150479] NET: Registered protocol family 16
[ 0.150638] node 0 link 0: io port [1000, fffff]
[ 0.150642] TOM: 0000000080000000 aka 2048M
[ 0.150708] node 0 link 0: mmio [a0000, bffff]
[ 0.150712] node 0 link 0: mmio [80000000, dfffffff]
[ 0.150715] node 0 link 0: mmio [e0000000, efffffff]
[ 0.150719] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.150722] bus: [00, ff] on node 0 link 0
[ 0.150726] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.150729] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.150732] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
[ 0.159491] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.159572] PCI: BIOS BUG #81[00000000] found
[ 0.159636] PCI: Using configuration type 1 for base access
[ 0.160240] bio: create slab <bio-0> at 0
[ 0.160359] ACPI: Interpreter disabled.
[ 0.160477] vgaarb: loaded
[ 0.160574] PCI: Probing PCI hardware
[ 0.160576] PCI: Probing PCI hardware (bus 00)
[ 0.160607] pci_bus 0000:00: scanning bus
[ 0.160621] pci 0000:00:00.0: [10de:02f3] type 0 class 0x000500
[ 0.160632] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.160659] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.160681] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.160685] pci 0000:00:00.1: calling quirk_mmio_always_on+0x0/0x13
[ 0.160711] pci 0000:00:00.1: calling quirk_resource_alignment+0x0/0x166
[ 0.160721] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.160726] pci 0000:00:00.2: calling quirk_mmio_always_on+0x0/0x13
[ 0.160758] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x166
[ 0.160770] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.160774] pci 0000:00:00.3: calling quirk_mmio_always_on+0x0/0x13
[ 0.160806] pci 0000:00:00.3: calling quirk_resource_alignment+0x0/0x166
[ 0.160818] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.160823] pci 0000:00:00.4: calling quirk_mmio_always_on+0x0/0x13
[ 0.160857] pci 0000:00:00.4: calling quirk_resource_alignment+0x0/0x166
[ 0.160870] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.160876] pci 0000:00:00.5: calling quirk_mmio_always_on+0x0/0x13
[ 0.160901] pci 0000:00:00.5: calling quirk_resource_alignment+0x0/0x166
[ 0.160920] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.160925] pci 0000:00:00.6: calling quirk_mmio_always_on+0x0/0x13
[ 0.160950] pci 0000:00:00.6: calling quirk_resource_alignment+0x0/0x166
[ 0.160961] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.160965] pci 0000:00:00.7: calling quirk_mmio_always_on+0x0/0x13
[ 0.160998] pci 0000:00:00.7: calling quirk_resource_alignment+0x0/0x166
[ 0.161014] pci 0000:00:02.0: [10de:02fc] type 1 class 0x000604
[ 0.161018] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.161032] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x166
[ 0.161046] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161050] pci 0000:00:02.0: PME# disabled
[ 0.161066] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604
[ 0.161070] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.161085] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x166
[ 0.161097] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161101] pci 0000:00:03.0: PME# disabled
[ 0.161116] pci 0000:00:05.0: [10de:0247] type 0 class 0x000300
[ 0.161122] pci 0000:00:05.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.161129] pci 0000:00:05.0: reg 10: [mem 0xb2000000-0xb2ffffff]
[ 0.161136] pci 0000:00:05.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.161143] pci 0000:00:05.0: reg 1c: [mem 0xb1000000-0xb1ffffff 64bit]
[ 0.161151] pci 0000:00:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.161157] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x166
[ 0.161196] pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
[ 0.161214] pci 0000:00:09.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.161330] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x166
[ 0.161396] pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
[ 0.161401] pci 0000:00:0a.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.161452] pci 0000:00:0a.0: calling nvidia_force_enable_hpet+0x0/0x7e
[ 0.161455] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.161525] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x166
[ 0.161545] pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
[ 0.161556] pci 0000:00:0a.1: calling quirk_mmio_always_on+0x0/0x13
[ 0.161596] pci 0000:00:0a.1: reg 20: [io 0x3040-0x307f]
[ 0.161606] pci 0000:00:0a.1: reg 24: [io 0x3000-0x303f]
[ 0.161620] pci 0000:00:0a.1: calling quirk_resource_alignment+0x0/0x166
[ 0.161643] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.161650] pci 0000:00:0a.1: PME# disabled
[ 0.161678] pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
[ 0.161686] pci 0000:00:0b.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.161698] pci 0000:00:0b.0: reg 10: [mem 0xb0004000-0xb0004fff]
[ 0.161741] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x166
[ 0.161756] pci 0000:00:0b.0: supports D1 D2
[ 0.161759] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161764] pci 0000:00:0b.0: PME# disabled
[ 0.161782] pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
[ 0.161792] pci 0000:00:0b.1: calling quirk_mmio_always_on+0x0/0x13
[ 0.161803] pci 0000:00:0b.1: reg 10: [mem 0xb0005000-0xb00050ff]
[ 0.161844] pci 0000:00:0b.1: calling quirk_resource_alignment+0x0/0x166
[ 0.161864] pci 0000:00:0b.1: supports D1 D2
[ 0.161867] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161871] pci 0000:00:0b.1: PME# disabled
[ 0.161898] pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
[ 0.161905] pci 0000:00:0d.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.161938] pci 0000:00:0d.0: reg 20: [io 0x3080-0x308f]
[ 0.161957] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x166
[ 0.161988] pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
[ 0.161999] pci 0000:00:0e.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.162010] pci 0000:00:0e.0: reg 10: [io 0x30b0-0x30b7]
[ 0.162019] pci 0000:00:0e.0: reg 14: [io 0x30a4-0x30a7]
[ 0.162028] pci 0000:00:0e.0: reg 18: [io 0x30a8-0x30af]
[ 0.162037] pci 0000:00:0e.0: reg 1c: [io 0x30a0-0x30a3]
[ 0.162046] pci 0000:00:0e.0: reg 20: [io 0x3090-0x309f]
[ 0.162055] pci 0000:00:0e.0: reg 24: [mem 0xb0006000-0xb0006fff]
[ 0.162069] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x166
[ 0.162109] pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
[ 0.162118] pci 0000:00:10.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.162144] pci 0000:00:10.0: calling quirk_resource_alignment+0x0/0x166
[ 0.162179] pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
[ 0.162191] pci 0000:00:10.1: calling quirk_mmio_always_on+0x0/0x13
[ 0.162202] pci 0000:00:10.1: reg 10: [mem 0xb0000000-0xb0003fff]
[ 0.162245] pci 0000:00:10.1: calling quirk_resource_alignment+0x0/0x166
[ 0.162268] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.162272] pci 0000:00:10.1: PME# disabled
[ 0.162304] pci 0000:00:14.0: [10de:0269] type 0 class 0x000680
[ 0.162311] pci 0000:00:14.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.162322] pci 0000:00:14.0: reg 10: [mem 0xb0007000-0xb0007fff]
[ 0.162331] pci 0000:00:14.0: reg 14: [io 0x30b8-0x30bf]
[ 0.162367] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x166
[ 0.162380] pci 0000:00:14.0: supports D1 D2
[ 0.162383] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162388] pci 0000:00:14.0: PME# disabled
[ 0.162403] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.162407] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.162418] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x166
[ 0.162430] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.162434] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x13
[ 0.162446] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x166
[ 0.162455] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.162459] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x13
[ 0.162470] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x166
[ 0.162479] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.162483] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x13
[ 0.162494] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x166
[ 0.162508] pci_bus 0000:00: fixups for bus
[ 0.162511] PCI: peer root bus 00 res updated from pci conf
[ 0.162517] pci 0000:00:02.0: scanning [bus 01-02] behind bridge, pass 0
[ 0.162539] pci_bus 0000:01: scanning bus
[ 0.162542] pci_bus 0000:01: fixups for bus
[ 0.162546] pci 0000:00:02.0: PCI bridge to [bus 01-02]
[ 0.162613] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.162616] pci 0000:00:02.0: bridge window [mem 0xb3000000-0xb31fffff]
[ 0.162621] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.162625] pci_bus 0000:01: bus scan returning with max=01
[ 0.162629] pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 0
[ 0.162650] pci_bus 0000:03: scanning bus
[ 0.162654] pci_bus 0000:03: fixups for bus
[ 0.162657] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.162725] pci_bus 0000:03: bus scan returning with max=03
[ 0.162730] pci 0000:00:10.0: scanning [bus 05-06] behind bridge, pass 0
[ 0.162754] pci_bus 0000:05: scanning bus
[ 0.162777] pci 0000:05:07.0: [104c:8039] type 2 class 0x000607
[ 0.162786] pci 0000:05:07.0: calling quirk_mmio_always_on+0x0/0x13
[ 0.162800] pci 0000:05:07.0: reg 10: [mem 0xb3200000-0xb3200fff]
[ 0.162808] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x166
[ 0.162825] pci 0000:05:07.0: supports D1 D2
[ 0.162828] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162834] pci 0000:05:07.0: PME# disabled
[ 0.162853] pci 0000:05:07.1: [104c:803a] type 0 class 0x000c00
[ 0.162862] pci 0000:05:07.1: calling quirk_mmio_always_on+0x0/0x13
[ 0.162876] pci 0000:05:07.1: reg 10: [mem 0xb3201000-0xb32017ff]
[ 0.162888] pci 0000:05:07.1: reg 14: [mem 0xb3204000-0xb3207fff]
[ 0.162936] pci 0000:05:07.1: calling quirk_resource_alignment+0x0/0x166
[ 0.162953] pci 0000:05:07.1: supports D1 D2
[ 0.162956] pci 0000:05:07.1: PME# supported from D0 D1 D2 D3hot
[ 0.162961] pci 0000:05:07.1: PME# disabled
[ 0.162980] pci 0000:05:07.2: [104c:803b] type 0 class 0x000180
[ 0.162989] pci 0000:05:07.2: calling quirk_mmio_always_on+0x0/0x13
[ 0.163003] pci 0000:05:07.2: reg 10: [mem 0xb3202000-0xb3202fff]
[ 0.163058] pci 0000:05:07.2: calling quirk_resource_alignment+0x0/0x166
[ 0.163074] pci 0000:05:07.2: supports D1 D2
[ 0.163077] pci 0000:05:07.2: PME# supported from D0 D1 D2 D3hot
[ 0.163082] pci 0000:05:07.2: PME# disabled
[ 0.163101] pci 0000:05:07.3: [104c:803c] type 0 class 0x000805
[ 0.163110] pci 0000:05:07.3: calling quirk_mmio_always_on+0x0/0x13
[ 0.163124] pci 0000:05:07.3: reg 10: [mem 0xb3201800-0xb32018ff]
[ 0.163178] pci 0000:05:07.3: calling quirk_resource_alignment+0x0/0x166
[ 0.163195] pci 0000:05:07.3: supports D1 D2
[ 0.163198] pci 0000:05:07.3: PME# supported from D0 D1 D2 D3hot
[ 0.163203] pci 0000:05:07.3: PME# disabled
[ 0.163245] pci_bus 0000:05: fixups for bus
[ 0.163248] pci 0000:00:10.0: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.163320] pci 0000:00:10.0: bridge window [mem 0xb3200000-0xb32fffff]
[ 0.163330] pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.163334] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.163338] pci 0000:00:10.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.163343] pci 0000:05:07.0: scanning [bus 06-06] behind bridge, pass 0
[ 0.163351] pci 0000:05:07.0: scanning [bus 06-06] behind bridge, pass 1
[ 0.163384] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
[ 0.163469] pci_bus 0000:05: bus scan returning with max=09
[ 0.163474] pci 0000:00:02.0: scanning [bus 01-02] behind bridge, pass 1
[ 0.163479] pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 1
[ 0.163484] pci 0000:00:10.0: scanning [bus 05-06] behind bridge, pass 1
[ 0.163490] pci_bus 0000:00: bus scan returning with max=09
[ 0.163788] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.170894] pci 0000:00:0a.0: default IRQ router [10de:0260]
[ 0.170969] PCI: pci_cache_line_size set to 64 bytes
[ 0.170985] pci 0000:00:05.0: BAR 0: reserving [mem 0xb2000000-0xb2ffffff flags 0x40200] (d=0, p=0)
[ 0.170990] pci 0000:00:05.0: BAR 1: reserving [mem 0xc0000000-0xcfffffff flags 0x14220c] (d=0, p=0)
[ 0.170995] pci 0000:00:05.0: BAR 3: reserving [mem 0xb1000000-0xb1ffffff flags 0x140204] (d=0, p=0)
[ 0.171005] pci 0000:00:0a.1: BAR 4: reserving [io 0x3040-0x307f flags 0x40101] (d=0, p=0)
[ 0.171009] pci 0000:00:0a.1: BAR 5: reserving [io 0x3000-0x303f flags 0x40101] (d=0, p=0)
[ 0.171015] pci 0000:00:0b.0: BAR 0: reserving [mem 0xb0004000-0xb0004fff flags 0x40200] (d=0, p=0)
[ 0.171021] pci 0000:00:0b.1: BAR 0: reserving [mem 0xb0005000-0xb00050ff flags 0x40200] (d=0, p=0)
[ 0.171027] pci 0000:00:0d.0: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[ 0.171031] pci 0000:00:0d.0: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0)
[ 0.171036] pci 0000:00:0d.0: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0)
[ 0.171040] pci 0000:00:0d.0: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0)
[ 0.171044] pci 0000:00:0d.0: BAR 4: reserving [io 0x3080-0x308f flags 0x40101] (d=0, p=0)
[ 0.171050] pci 0000:00:0e.0: BAR 0: reserving [io 0x30b0-0x30b7 flags 0x40101] (d=0, p=0)
[ 0.171055] pci 0000:00:0e.0: BAR 1: reserving [io 0x30a4-0x30a7 flags 0x40101] (d=0, p=0)
[ 0.171059] pci 0000:00:0e.0: BAR 2: reserving [io 0x30a8-0x30af flags 0x40101] (d=0, p=0)
[ 0.171064] pci 0000:00:0e.0: BAR 3: reserving [io 0x30a0-0x30a3 flags 0x40101] (d=0, p=0)
[ 0.171068] pci 0000:00:0e.0: BAR 4: reserving [io 0x3090-0x309f flags 0x40101] (d=0, p=0)
[ 0.171075] pci 0000:00:10.1: BAR 0: reserving [mem 0xb0000000-0xb0003fff flags 0x40200] (d=0, p=0)
[ 0.171081] pci 0000:00:14.0: BAR 0: reserving [mem 0xb0007000-0xb0007fff flags 0x40200] (d=0, p=0)
[ 0.171086] pci 0000:00:14.0: BAR 1: reserving [io 0x30b8-0x30bf flags 0x40101] (d=0, p=0)
[ 0.171096] pci 0000:05:07.1: BAR 0: reserving [mem 0xb3201000-0xb32017ff flags 0x40200] (d=0, p=0)
[ 0.171100] pci 0000:05:07.1: BAR 1: reserving [mem 0xb3204000-0xb3207fff flags 0x40200] (d=0, p=0)
[ 0.171107] pci 0000:05:07.2: BAR 0: reserving [mem 0xb3202000-0xb3202fff flags 0x40200] (d=0, p=0)
[ 0.171113] pci 0000:05:07.3: BAR 0: reserving [mem 0xb3201800-0xb32018ff flags 0x40200] (d=0, p=0)
[ 0.171136] pci 0000:00:0e.0: BAR 5: reserving [mem 0xb0006000-0xb0006fff flags 0x40200] (d=1, p=1)
[ 0.171148] pci 0000:05:07.0: BAR 0: reserving [mem 0xb3200000-0xb3200fff flags 0x40200] (d=1, p=1)
[ 0.171158] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.171162] reserve RAM buffer: 000000007bf10000 - 000000007bffffff
[ 0.172436] pnp: PnP ACPI: disabled
[ 0.174550] PCI: max bus depth: 2 pci_try_num: 3
[ 0.174580] pci 0000:00:05.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.174664] pci 0000:00:02.0: PCI bridge to [bus 01-02]
[ 0.174731] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.174799] pci 0000:00:02.0: bridge window [mem 0xb3000000-0xb31fffff]
[ 0.174869] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.174952] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.175026] pci 0000:05:07.0: BAR 10: assigned [mem 0x84000000-0x87ffffff]
[ 0.175098] pci 0000:05:07.0: BAR 9: assigned [mem 0x88000000-0x8bffffff pref]
[ 0.175181] pci 0000:05:07.0: BAR 8: assigned [io 0x1000-0x10ff]
[ 0.175250] pci 0000:05:07.0: BAR 7: assigned [io 0x1400-0x14ff]
[ 0.175318] pci 0000:05:07.0: CardBus bridge to [bus 06-09]
[ 0.175384] pci 0000:05:07.0: bridge window [io 0x1400-0x14ff]
[ 0.175454] pci 0000:05:07.0: bridge window [io 0x1000-0x10ff]
[ 0.175524] pci 0000:05:07.0: bridge window [mem 0x88000000-0x8bffffff pref]
[ 0.175607] pci 0000:05:07.0: bridge window [mem 0x84000000-0x87ffffff]
[ 0.175678] pci 0000:00:10.0: PCI bridge to [bus 05-06]
[ 0.175746] pci 0000:00:10.0: bridge window [mem 0xb3200000-0xb32fffff]
[ 0.175825] pci 0000:00:02.0: setting latency timer to 64
[ 0.175830] pci 0000:00:03.0: setting latency timer to 64
[ 0.175836] pci 0000:00:10.0: setting latency timer to 64
[ 0.175843] pci 0000:05:07.0: enabling device (0104 -> 0107)
[ 0.175916] pci 0000:05:07.0: can't find IRQ for PCI INT D; probably buggy MP table
[ 0.176001] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.176004] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.176008] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
[ 0.176011] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.176015] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb31fffff]
[ 0.176018] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.176022] pci_bus 0000:05: resource 1 [mem 0xb3200000-0xb32fffff]
[ 0.176025] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.176029] pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.176032] pci_bus 0000:05: resource 6 [mem 0x80000000-0xfcffffffff]
[ 0.176036] pci_bus 0000:06: resource 0 [io 0x1400-0x14ff]
[ 0.176039] pci_bus 0000:06: resource 1 [io 0x1000-0x10ff]
[ 0.176042] pci_bus 0000:06: resource 2 [mem 0x88000000-0x8bffffff pref]
[ 0.176046] pci_bus 0000:06: resource 3 [mem 0x84000000-0x87ffffff]
[ 0.176087] NET: Registered protocol family 2
[ 0.176188] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.176418] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.177359] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.177638] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.177706] TCP reno registered
[ 0.177770] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.177843] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.177980] NET: Registered protocol family 1
[ 0.178058] pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178077] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.178147] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.178217] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178222] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178227] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x8b
[ 0.178232] pci 0000:00:00.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178237] pci 0000:00:00.1: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178242] pci 0000:00:00.1: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178246] pci 0000:00:00.1: calling pci_fixup_video+0x0/0x8b
[ 0.178251] pci 0000:00:00.2: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178256] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178261] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178265] pci 0000:00:00.2: calling pci_fixup_video+0x0/0x8b
[ 0.178270] pci 0000:00:00.3: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178275] pci 0000:00:00.3: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178280] pci 0000:00:00.3: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178284] pci 0000:00:00.3: calling pci_fixup_video+0x0/0x8b
[ 0.178289] pci 0000:00:00.4: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178294] pci 0000:00:00.4: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178299] pci 0000:00:00.4: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178303] pci 0000:00:00.4: calling pci_fixup_video+0x0/0x8b
[ 0.178308] pci 0000:00:00.5: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178315] pci 0000:00:00.5: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178320] pci 0000:00:00.5: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178324] pci 0000:00:00.5: calling pci_fixup_video+0x0/0x8b
[ 0.178329] pci 0000:00:00.6: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178334] pci 0000:00:00.6: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178338] pci 0000:00:00.6: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178342] pci 0000:00:00.6: calling pci_fixup_video+0x0/0x8b
[ 0.178347] pci 0000:00:00.7: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178352] pci 0000:00:00.7: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178357] pci 0000:00:00.7: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178361] pci 0000:00:00.7: calling pci_fixup_video+0x0/0x8b
[ 0.178366] pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178387] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.178454] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178458] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178463] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x8b
[ 0.178468] pci 0000:00:03.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178491] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.178558] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178563] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178567] pci 0000:00:03.0: calling pci_fixup_video+0x0/0x8b
[ 0.178572] pci 0000:00:05.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178578] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178583] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178587] pci 0000:00:05.0: calling pci_fixup_video+0x0/0x8b
[ 0.178590] pci 0000:00:05.0: Boot video device
[ 0.178595] pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178620] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178624] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178629] pci 0000:00:09.0: calling pci_fixup_video+0x0/0x8b
[ 0.178636] pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178641] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178645] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178650] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0x8b
[ 0.178655] pci 0000:00:0a.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178666] pci 0000:00:0a.1: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178671] pci 0000:00:0a.1: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.178675] pci 0000:00:0a.1: calling pci_fixup_video+0x0/0x8b
[ 0.178680] pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.178689] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.178693] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243327] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0x8b
[ 0.243334] pci 0000:00:0b.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.243344] pci 0000:00:0b.1: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243350] pci 0000:00:0b.1: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243369] pci 0000:00:0b.1: calling pci_fixup_video+0x0/0x8b
[ 0.243375] pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.243383] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243387] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243392] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0x8b
[ 0.243397] pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.243458] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.243526] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243530] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243534] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0x8b
[ 0.243540] pci 0000:00:10.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.243603] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.243671] pci 0000:00:10.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243675] pci 0000:00:10.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243679] pci 0000:00:10.0: calling pci_fixup_video+0x0/0x8b
[ 0.243685] pci 0000:00:10.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.243751] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.243818] pci 0000:00:10.1: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243823] pci 0000:00:10.1: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243827] pci 0000:00:10.1: calling pci_fixup_video+0x0/0x8b
[ 0.243833] pci 0000:00:14.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18
[ 0.243841] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243845] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243849] pci 0000:00:14.0: calling pci_fixup_video+0x0/0x8b
[ 0.243856] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243860] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243864] pci 0000:00:18.0: calling pci_fixup_video+0x0/0x8b
[ 0.243870] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243874] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243878] pci 0000:00:18.1: calling pci_fixup_video+0x0/0x8b
[ 0.243884] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243888] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243892] pci 0000:00:18.2: calling pci_fixup_video+0x0/0x8b
[ 0.243898] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243902] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243906] pci 0000:00:18.3: calling pci_fixup_video+0x0/0x8b
[ 0.243912] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243917] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243922] pci 0000:05:07.0: calling pci_fixup_video+0x0/0x8b
[ 0.243928] pci 0000:05:07.1: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243933] pci 0000:05:07.1: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243937] pci 0000:05:07.1: calling pci_fixup_video+0x0/0x8b
[ 0.243943] pci 0000:05:07.2: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243947] pci 0000:05:07.2: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243952] pci 0000:05:07.2: calling pci_fixup_video+0x0/0x8b
[ 0.243958] pci 0000:05:07.3: calling quirk_cardbus_legacy+0x0/0x16
[ 0.243962] pci 0000:05:07.3: calling quirk_usb_early_handoff+0x0/0x4bd
[ 0.243967] pci 0000:05:07.3: calling pci_fixup_video+0x0/0x8b
[ 0.243971] PCI: CLS 64 bytes, default 64
[ 0.244025] Unpacking initramfs...
[ 0.343284] Freeing initrd memory: 3048k freed
[ 0.345671] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.350093] highmem bounce pool size: 64 pages
[ 0.350100] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.367010] msgmni has been set to 1741
[ 0.367232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.367315] io scheduler noop registered
[ 0.367378] io scheduler deadline registered
[ 0.367451] io scheduler cfq registered (default)
[ 0.367949] vga16fb: initializing
[ 0.367953] vga16fb: mapped to 0xc00a0000
[ 0.368101] fb0: VGA16 VGA frame buffer device
[ 0.415556] Linux agpgart interface v0.103
[ 0.415770] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.417517] i8042: Detected active multiplexing controller, rev 1.1
[ 0.418613] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.418682] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.418788] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.418866] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.419986] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.420385] mousedev: PS/2 mouse device common for all mice
[ 0.420788] rtc_cmos: dev (254:0)
[ 0.420798] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.420895] rtc0: alarms up to one day, 114 bytes nvram
[ 0.420989] cpuidle: using governor ladder
[ 0.421053] cpuidle: using governor menu
[ 0.421129] TCP cubic registered
[ 0.421192] NET: Registered protocol family 17
[ 0.421262] Registering the dns_resolver key type
[ 0.421350] Using IPI Shortcut mode
[ 0.421631] PM: Hibernation image not present or could not be loaded.
[ 0.426971] Magic number: 7:672:176
[ 0.427084] tty ttyr2: hash matches
[ 0.427260] rtc_cmos rtc_cmos: setting system clock to 2011-08-25 11:11:27 UTC (1314270687)
[ 0.427454] Freeing unused kernel memory: 300k freed
[ 0.427737] Write protecting the kernel text: 1832k
[ 0.427826] Write protecting the kernel read-only data: 984k
[ 0.427892] NX-protecting the kernel data: 2264k
[ 0.446798] udevd[668]: starting version 172
[ 0.452280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.545243] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.545348] forcedeth 0000:00:14.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 0.546648] forcedeth 0000:00:14.0: setting latency timer to 64
[ 0.562858] SCSI subsystem initialized
[ 0.574040] usbcore: registered new interface driver usbfs
[ 0.574133] usbcore: registered new interface driver hub
[ 0.577241] usbcore: registered new device driver usb
[ 0.577780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.597363] libata version 3.00 loaded.
[ 1.100432] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:90:f5:67:a6:d3
[ 1.100521] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
[ 1.100737] ehci_hcd 0000:00:0b.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 1.100837] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 1.100842] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 1.100930] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 1.101040] ehci_hcd 0000:00:0b.1: debug port 1
[ 1.101112] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 1.101129] ehci_hcd 0000:00:0b.1: irq 10, io mem 0xb0005000
[ 1.109939] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 1.110265] hub 1-0:1.0: USB hub found
[ 1.110332] hub 1-0:1.0: 8 ports detected
[ 1.110598] sata_nv 0000:00:0e.0: version 3.5
[ 1.110607] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
[ 1.110682] sata_nv 0000:00:0e.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 1.110765] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 1.110882] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 1.113583] scsi0 : sata_nv
[ 1.115331] scsi1 : sata_nv
[ 1.115472] ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 7
[ 1.115543] ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 7
[ 1.115656] pata_amd 0000:00:0d.0: version 0.4.1
[ 1.115701] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 1.116422] scsi2 : pata_amd
[ 1.116648] scsi3 : pata_amd
[ 1.116765] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 1.116834] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 1.117172] ata3: port disabled--ignoring
[ 1.193726] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.193823] ohci_hcd 0000:00:0b.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 1.193923] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 1.193927] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 1.194004] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 1.194114] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000
[ 1.248829] hub 2-0:1.0: USB hub found
[ 1.248902] hub 2-0:1.0: 8 ports detected
[ 1.346618] Switching to clocksource tsc
[ 1.416464] usb 1-5: new high speed USB device number 2 using ehci_hcd
[ 1.579773] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.586827] ata1.00: HPA detected: current 153356490, native 156301488
[ 1.586899] ata1.00: ATA-7: FUJITSU MHV2080BH, 0085002A, max UDMA/100
[ 1.586968] ata1.00: 153356490 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.600160] ata1.00: configured for UDMA/100
[ 1.600329] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0085 PQ: 0 ANSI: 5
[ 1.912989] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.073304] ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33
[ 2.073376] ata4: nv_mode_filter: 0x739f&0x3f3ff->0x739f, BIOS=0x3f000 (0xc600) ACPI=0x0
[ 2.086565] ata4.00: configured for UDMA/33
[ 2.088881] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.60 PQ: 0 ANSI: 5
[ 2.102505] sd 0:0:0:0: [sda] 153356490 512-byte logical blocks: (78.5 GB/73.1 GiB)
[ 2.102636] sd 0:0:0:0: [sda] Write Protect is off
[ 2.102703] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.102723] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.105139] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.105145] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.105610] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.397299] sda: sda1 sda2 < sda5 sda6 >
[ 2.397838] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.403758] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.403992] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.910874] PM: Starting manual resume from disk
[ 2.910957] PM: Hibernation image partition 8:6 present
[ 2.910960] PM: Looking for hibernation image.
[ 2.911236] PM: Image not found (code -22)
[ 2.911239] PM: Hibernation image not present or could not be loaded.
[ 2.914983] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 2.914990] PM: Basic memory bitmaps created
[ 2.932763] PM: Basic memory bitmaps freed
[ 2.966467] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 3.216530] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.863220] udevd[846]: starting version 172
[ 7.832756] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.042432] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 8.042531] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 8.100300] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 8.100462] NV_TCO: Watchdog reboot not detected.
[ 8.100664] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 8.446989] cfg80211: Calling CRDA to update world regulatory domain
[ 8.580244] snd_hda_intel 0000:00:10.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 8.580335] hda_intel: Disabling MSI
[ 8.580421] snd_hda_intel 0000:00:10.1: setting latency timer to 64
[ 8.875261] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.875401] ieee80211 phy0: hwaddr 00:15:af:65:3e:90, RTL8187vB (default) V1 + rtl8225, rfkill mask 2
[ 8.886791] rtl8187: Customer ID is 0x00
[ 8.886890] Registered led device: rtl8187-phy0::radio
[ 8.886912] Registered led device: rtl8187-phy0::tx
[ 8.886934] Registered led device: rtl8187-phy0::rx
[ 8.888157] rtl8187: wireless switch is off
[ 8.888261] usbcore: registered new interface driver rtl8187
[ 9.034998] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04713/0x204000/0x0
[ 9.068725] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[ 9.091522] udevd[864]: renamed network interface wlan0 to wlan1
[ 11.623392] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 12.459813] hda_codec: ALC883: SKU not ready 0x411111f0
[ 12.546538] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input2
[ 13.781495] Adding 1004024k swap on /dev/sda6. Priority:-1 extents:1 across:1004024k
[ 13.785700] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 14.106572] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 14.262374] fuse init (API version 7.17)
[ 15.931277] RPC: Registered named UNIX socket transport module.
[ 15.931361] RPC: Registered udp transport module.
[ 15.931426] RPC: Registered tcp transport module.
[ 15.931490] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.612578] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
[ 19.618051] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 19.618120] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 141.287349] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 161.123878] wlan1: authenticate with 6c:2e:85:67:00:28 (try 1)
[ 161.126007] wlan1: authenticated
[ 161.220906] wlan1: associate with 6c:2e:85:67:00:28 (try 1)
[ 161.223779] wlan1: RX AssocResp from 6c:2e:85:67:00:28 (capab=0x411 status=0 aid=1)
[ 161.223783] wlan1: associated
[ 179.014671] wlan1: deauthenticating from 6c:2e:85:67:00:28 by local choice (reason=3)
[ 179.060837] cfg80211: Calling CRDA to update world regulatory domain
[ 243.389359] ata1: EH in SWNCQ mode,QC:qc_active 0x7 sactive 0x7
[ 243.389367] ata1: SWNCQ:qc_active 0x3 defer_bits 0x4 last_issue_tag 0x1
[ 243.389368] dhfis 0x3 dmafis 0x0 sdbfis 0x0
[ 243.389374] ata1: ATA_REG 0x40 ERR_REG 0x0
[ 243.389377] ata1: tag : dhfis dmafis sdbfis sactive
[ 243.389380] ata1: tag 0x0: 1 0 0 1
[ 243.389383] ata1: tag 0x1: 1 0 0 1
[ 243.389398] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen
[ 243.389403] ata1.00: failed command: READ FPDMA QUEUED
[ 243.389411] ata1.00: cmd 60/08:00:c9:10:be/00:00:07:00:00/40 tag 0 ncq 4096 in
[ 243.389413] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 243.389417] ata1.00: status: { DRDY }
[ 243.389420] ata1.00: failed command: READ FPDMA QUEUED
[ 243.389428] ata1.00: cmd 60/08:08:19:10:be/00:00:07:00:00/40 tag 1 ncq 4096 in
[ 243.389430] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 243.389433] ata1.00: status: { DRDY }
[ 243.389437] ata1.00: failed command: WRITE FPDMA QUEUED
[ 243.389444] ata1.00: cmd 61/58:10:79:4f:62/00:00:06:00:00/40 tag 2 ncq 45056 out
[ 243.389446] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 243.389450] ata1.00: status: { DRDY }
[ 243.389457] ata1: hard resetting link
[ 243.389460] ata1: nv: skipping hardreset on occupied port
[ 244.289547] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 244.306186] Clocksource tsc unstable (delta = 429752755 ns)
[ 244.306214] Switching to clocksource jiffies
[ 244.309862] ata1.00: configured for UDMA/100
[ 244.309862] ata1.00: device reported invalid CHS sector 0
[ 244.309862] ata1.00: device reported invalid CHS sector 0
[ 244.309862] ata1.00: device reported invalid CHS sector 0
[ 244.309862] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 244.309862] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 244.309862] Descriptor sense data with sense descriptors (in hex):
[ 244.309862] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 244.309862] 00 00 00 00
[ 244.309862] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 244.309862] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 07 be 10 c9 00 00 08 00
[ 244.309862] end_request: I/O error, dev sda, sector 129896649
[ 244.309862] ata1: EH complete
[ 293.834434] ata1: EH in SWNCQ mode,QC:qc_active 0x7FF sactive 0x7FF
[ 293.834442] ata1: SWNCQ:qc_active 0x1F defer_bits 0x7E0 last_issue_tag 0x4
[ 293.834444] dhfis 0x1F dmafis 0x0 sdbfis 0x0
[ 293.834449] ata1: ATA_REG 0x40 ERR_REG 0x0
[ 293.834452] ata1: tag : dhfis dmafis sdbfis sactive
[ 293.834456] ata1: tag 0x0: 1 0 0 1
[ 293.834459] ata1: tag 0x1: 1 0 0 1
[ 293.834462] ata1: tag 0x2: 1 0 0 1
[ 293.834465] ata1: tag 0x3: 1 0 0 1
[ 293.834468] ata1: tag 0x4: 1 0 0 1
[ 293.834483] ata1.00: exception Emask 0x0 SAct 0x7ff SErr 0x0 action 0x6 frozen
[ 293.834488] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834496] ata1.00: cmd 61/80:00:49:eb:6e/00:00:06:00:00/40 tag 0 ncq 65536 out
[ 293.834498] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834502] ata1.00: status: { DRDY }
[ 293.834505] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834513] ata1.00: cmd 61/00:08:c9:f2:6e/02:00:06:00:00/40 tag 1 ncq 262144 out
[ 293.834515] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834518] ata1.00: status: { DRDY }
[ 293.834522] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834530] ata1.00: cmd 61/c8:10:c9:f5:6e/01:00:06:00:00/40 tag 2 ncq 233472 out
[ 293.834531] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834535] ata1.00: status: { DRDY }
[ 293.834538] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834546] ata1.00: cmd 61/00:18:c9:47:6f/01:00:06:00:00/40 tag 3 ncq 131072 out
[ 293.834547] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834551] ata1.00: status: { DRDY }
[ 293.834554] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834562] ata1.00: cmd 61/80:20:01:07:7b/00:00:06:00:00/40 tag 4 ncq 65536 out
[ 293.834564] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834567] ata1.00: status: { DRDY }
[ 293.834570] ata1.00: failed command: READ FPDMA QUEUED
[ 293.834578] ata1.00: cmd 60/08:28:41:8e:82/00:00:08:00:00/40 tag 5 ncq 4096 in
[ 293.834580] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834583] ata1.00: status: { DRDY }
[ 293.834587] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834594] ata1.00: cmd 61/08:30:a9:34:7b/00:00:06:00:00/40 tag 6 ncq 4096 out
[ 293.834596] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834599] ata1.00: status: { DRDY }
[ 293.834603] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834610] ata1.00: cmd 61/10:38:21:35:7b/00:00:06:00:00/40 tag 7 ncq 8192 out
[ 293.834612] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834616] ata1.00: status: { DRDY }
[ 293.834619] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834626] ata1.00: cmd 61/08:40:d1:33:7b/00:00:06:00:00/40 tag 8 ncq 4096 out
[ 293.834628] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834632] ata1.00: status: { DRDY }
[ 293.834635] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834643] ata1.00: cmd 61/08:48:99:5f:62/00:00:06:00:00/40 tag 9 ncq 4096 out
[ 293.834644] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834648] ata1.00: status: { DRDY }
[ 293.834651] ata1.00: failed command: WRITE FPDMA QUEUED
[ 293.834659] ata1.00: cmd 61/58:50:a1:5f:62/00:00:06:00:00/40 tag 10 ncq 45056 out
[ 293.834661] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 293.834664] ata1.00: status: { DRDY }
[ 293.834671] ata1: hard resetting link
[ 293.834674] ata1: nv: skipping hardreset on occupied port
[ 294.301320] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 294.321806] ata1.00: configured for UDMA/100
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1.00: device reported invalid CHS sector 0
[ 294.321806] ata1: EH complete
[ 359.603023] ata1: EH in SWNCQ mode,QC:qc_active 0x1E3 sactive 0x1E3
[ 359.603030] ata1: SWNCQ:qc_active 0x1E1 defer_bits 0x2 last_issue_tag 0x0
[ 359.603032] dhfis 0x1E0 dmafis 0x0 sdbfis 0x0
[ 359.603038] ata1: ATA_REG 0x40 ERR_REG 0x0
[ 359.603041] ata1: tag : dhfis dmafis sdbfis sactive
[ 359.603044] ata1: tag 0x0: 0 0 0 1
[ 359.603047] ata1: tag 0x5: 1 0 0 1
[ 359.603050] ata1: tag 0x6: 1 0 0 1
[ 359.603053] ata1: tag 0x7: 1 0 0 1
[ 359.603056] ata1: tag 0x8: 1 0 0 1
[ 359.603072] ata1.00: exception Emask 0x0 SAct 0x1e3 SErr 0x0 action 0x6 frozen
[ 359.603077] ata1.00: failed command: WRITE FPDMA QUEUED
[ 359.603085] ata1.00: cmd 61/70:00:c1:61:62/00:00:06:00:00/40 tag 0 ncq 57344 out
[ 359.603087] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 359.603090] ata1.00: status: { DRDY }
[ 359.603094] ata1.00: failed command: READ FPDMA QUEUED
[ 359.603101] ata1.00: cmd 60/20:08:91:23:9b/00:00:07:00:00/40 tag 1 ncq 16384 in
[ 359.603103] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 359.603107] ata1.00: status: { DRDY }
[ 359.603110] ata1.00: failed command: WRITE FPDMA QUEUED
[ 359.603118] ata1.00: cmd 61/40:28:31:37:7b/00:00:06:00:00/40 tag 5 ncq 32768 out
[ 359.603120] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 359.603123] ata1.00: status: { DRDY }
[ 359.603126] ata1.00: failed command: WRITE FPDMA QUEUED
[ 359.603134] ata1.00: cmd 61/08:30:21:37:7b/00:00:06:00:00/40 tag 6 ncq 4096 out
[ 359.603136] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 359.603139] ata1.00: status: { DRDY }
[ 359.603143] ata1.00: failed command: WRITE FPDMA QUEUED
[ 359.603150] ata1.00: cmd 61/30:38:81:36:7b/00:00:06:00:00/40 tag 7 ncq 24576 out
[ 359.603152] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 359.603155] ata1.00: status: { DRDY }
[ 359.603159] ata1.00: failed command: WRITE FPDMA QUEUED
[ 359.603166] ata1.00: cmd 61/08:40:b9:61:62/00:00:06:00:00/40 tag 8 ncq 4096 out
[ 359.603168] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 359.603172] ata1.00: status: { DRDY }
[ 359.603179] ata1: hard resetting link
[ 359.603181] ata1: nv: skipping hardreset on occupied port
[ 360.069906] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 360.090174] ata1.00: configured for UDMA/100
[ 360.090174] ata1.00: device reported invalid CHS sector 0
[ 360.090174] ata1.00: device reported invalid CHS sector 0
[ 360.090174] ata1.00: device reported invalid CHS sector 0
[ 360.090174] ata1.00: device reported invalid CHS sector 0
[ 360.090174] ata1.00: device reported invalid CHS sector 0
[ 360.090174] ata1.00: device reported invalid CHS sector 0
[ 360.090174] ata1: EH complete
[ 395.538647] ata1: EH in SWNCQ mode,QC:qc_active 0x7FE00 sactive 0x7FE00
[ 395.538655] ata1: SWNCQ:qc_active 0x7E00 defer_bits 0x78000 last_issue_tag 0xe
[ 395.538657] dhfis 0x3E00 dmafis 0x0 sdbfis 0x0
[ 395.538662] ata1: ATA_REG 0x40 ERR_REG 0x0
[ 395.538665] ata1: tag : dhfis dmafis sdbfis sactive
[ 395.538669] ata1: tag 0x9: 1 0 0 1
[ 395.538672] ata1: tag 0xa: 1 0 0 1
[ 395.538675] ata1: tag 0xb: 1 0 0 1
[ 395.538678] ata1: tag 0xc: 1 0 0 1
[ 395.538681] ata1: tag 0xd: 1 0 0 1
[ 395.538684] ata1: tag 0xe: 0 0 0 1
[ 395.538697] ata1.00: NCQ disabled due to excessive errors
[ 395.538703] ata1.00: exception Emask 0x0 SAct 0x7fe00 SErr 0x0 action 0x6 frozen
[ 395.538708] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538717] ata1.00: cmd 61/80:48:49:34:8e/00:00:06:00:00/40 tag 9 ncq 65536 out
[ 395.538718] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538722] ata1.00: status: { DRDY }
[ 395.538725] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538733] ata1.00: cmd 61/00:50:c9:37:8e/01:00:06:00:00/40 tag 10 ncq 131072 out
[ 395.538735] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538739] ata1.00: status: { DRDY }
[ 395.538742] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538749] ata1.00: cmd 61/80:58:b9:37:7b/00:00:06:00:00/40 tag 11 ncq 65536 out
[ 395.538751] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538755] ata1.00: status: { DRDY }
[ 395.538758] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538766] ata1.00: cmd 61/08:60:c9:18:8e/00:00:06:00:00/40 tag 12 ncq 4096 out
[ 395.538767] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538771] ata1.00: status: { DRDY }
[ 395.538774] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538782] ata1.00: cmd 61/40:68:89:43:8e/00:00:06:00:00/40 tag 13 ncq 32768 out
[ 395.538783] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538787] ata1.00: status: { DRDY }
[ 395.538790] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538798] ata1.00: cmd 61/08:70:d9:ff:6e/00:00:06:00:00/40 tag 14 ncq 4096 out
[ 395.538800] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538803] ata1.00: status: { DRDY }
[ 395.538806] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538814] ata1.00: cmd 61/08:78:a9:34:6a/00:00:06:00:00/40 tag 15 ncq 4096 out
[ 395.538816] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538819] ata1.00: status: { DRDY }
[ 395.538822] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538830] ata1.00: cmd 61/10:80:71:d7:6f/00:00:06:00:00/40 tag 16 ncq 8192 out
[ 395.538832] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538835] ata1.00: status: { DRDY }
[ 395.538839] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538846] ata1.00: cmd 61/08:88:61:ff:6d/00:00:06:00:00/40 tag 17 ncq 4096 out
[ 395.538848] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538852] ata1.00: status: { DRDY }
[ 395.538855] ata1.00: failed command: WRITE FPDMA QUEUED
[ 395.538862] ata1.00: cmd 61/08:90:e9:62:62/01:00:06:00:00/40 tag 18 ncq 135168 out
[ 395.538864] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.538868] ata1.00: status: { DRDY }
[ 395.538874] ata1: hard resetting link
[ 395.538877] ata1: nv: skipping hardreset on occupied port
[ 396.005559] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 396.025796] ata1.00: configured for UDMA/100
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1.00: device reported invalid CHS sector 0
[ 396.025796] ata1: EH complete
CPU0
0: 78 IO-APIC-edge timer
1: 2746 IO-APIC-edge i8042
2: 0 XT-PIC-XT-PIC cascade
7: 31224 IO-APIC-edge sata_nv
8: 0 IO-APIC-edge rtc0
10: 41573 IO-APIC-edge ehci_hcd:usb1, eth0
11: 0 IO-APIC-edge ohci_hcd:usb2, snd_hda_intel
12: 73107 IO-APIC-edge i8042
14: 0 IO-APIC-edge pata_amd
15: 3773 IO-APIC-edge pata_amd
NMI: 5 Non-maskable interrupts
LOC: 244575 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 5 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 3 Machine check polls
ERR: 1
MIS: 0

Next message: Pavel Emelyanov: "Re: [RFC] fs, proc: Introduce the /proc/<pid>/map_files/ directoryv2"
Previous message: Peter Zijlstra: "Re: perf: overflow signal survives an exec call starting in 3.0"
In reply to: Bjorn Helgaas: "Re: [Bug 41622] [REGRESSION][BISECTED] Notebook crashes upondetecting the PCI subsystem with kernels >= 2.6.24-rc7"
Next in thread: Bjorn Helgaas: "Re: [Bug 41622] [REGRESSION][BISECTED] Notebook crashes upondetecting the PCI subsystem with kernels >= 2.6.24-rc7"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]