[PATCH 2/3] Input: penmount - add PenMount 3000 support

[John Sung]

Add dual touch support for PenMount 3000 touch controller.

Signed-off-by: John Sung <penmount.touch@xxxxxxxxx>
---
 drivers/input/touchscreen/penmount.c |   61 ++++++++++++++++++++++++++++++++++
 1 files changed, 61 insertions(+), 0 deletions(-)

diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
index 240f6a2..e4f953e 100644
--- a/drivers/input/touchscreen/penmount.c
+++ b/drivers/input/touchscreen/penmount.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/init.h>
 
@@ -34,6 +35,17 @@ MODULE_LICENSE("GPL");
  */
 
 #define	PM_MAX_LENGTH	6
+#define	PM_MAX_MTSLOT	16
+#define	PM_3000_MTSLOT	2
+
+/*
+ * Multi-touch slot
+ */
+
+struct mt_slot {
+	unsigned short x, y;
+	unsigned char state; /* is the touch valid? */
+};
 
 /*
  * Per-touchscreen data.
@@ -46,9 +58,33 @@ struct pm {
 	unsigned char data[PM_MAX_LENGTH];
 	char phys[32];
 	unsigned char packetsize;
+	unsigned char maxcontacts;
+	struct mt_slot slots[PM_MAX_MTSLOT];
 };
 
 /*
+ * pm_mtevent() sends mt events and also emulates pointer movement
+ */
+
+static void pm_mtevent(struct pm *pm, struct input_dev *input)
+{
+	int i;
+
+	for (i = 0; i < pm->maxcontacts; ++i) {
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER,
+				pm->slots[i].state);
+		if (pm->slots[i].state) {
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, pm->slots[i].x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, pm->slots[i].y);
+		}
+	}
+
+	input_mt_report_pointer_emulation(input, true);
+	input_sync(input);
+}
+
+/*
  * pm_checkpacket() checks if data packet is valid
  */
 
@@ -99,6 +135,20 @@ static irqreturn_t pm_interrupt(struct serio *serio,
 			}
 		}
 		break;
+	case 0x3000:
+		if ((pm->data[0] & 0xce) == 0x40) {
+			if (pm->packetsize == ++pm->idx) {
+				if (pm_checkpacket(pm->data)) {
+					int slotnum = pm->data[0] & 0x0f;
+					pm->slots[slotnum].state = !!(pm->data[0] & 0x30);
+					pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1];
+					pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3];
+					pm_mtevent(pm, dev);
+				}
+				pm->idx = 0;
+			}
+		}
+		break;
 	}
 
 	return IRQ_HANDLED;
@@ -142,6 +192,7 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv)
 	pm->serio = serio;
 	pm->dev = input_dev;
 	snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
+	pm->maxcontacts = 1;
 
 	input_dev->name = "PenMount Serial TouchScreen";
 	input_dev->phys = pm->phys;
@@ -166,6 +217,16 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv)
 		pm->packetsize = 6;
 		input_dev->id.product = 0x6000;
 		break;
+	case 2:
+		pm->packetsize = 6;
+		input_dev->id.product = 0x3000;
+		input_set_abs_params(pm->dev, ABS_X, 0, 0x7ff, 0, 0);
+		input_set_abs_params(pm->dev, ABS_Y, 0, 0x7ff, 0, 0);
+		pm->maxcontacts = PM_3000_MTSLOT;
+		input_mt_init_slots(pm->dev, PM_3000_MTSLOT);
+		input_set_abs_params(pm->dev, ABS_MT_POSITION_X, 0, 0x7ff, 0, 0);
+		input_set_abs_params(pm->dev, ABS_MT_POSITION_Y, 0, 0x7ff, 0, 0);
+		break;
 	}
 
 	serio_set_drvdata(serio, pm);
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/