Re: [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts

[Marc Zyngier]

On 19/09/11 16:05, Russell King - ARM Linux wrote:
> On Mon, Sep 19, 2011 at 04:00:34PM +0100, Marc Zyngier wrote:
>> Replying to myself after a quick investigation... Looks like the Qualcomm
>> implementation does exactly what is mentioned above:
>>
>> arch/arm/mach-msm/platsmp.c:
>> void __cpuinit platform_secondary_init(unsigned int cpu)
>> {
>> 	/* Configure edge-triggered PPIs */
>> 	writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
>> 	[...]
>>
>> The way I understand it, this "MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4"
>> is a banked register (otherwise we would not do it in platform_secondary_init(),
>> right?) So doing a set_type() from __setup_irq() would be just wrong. It really
>> needs to be done on a per-CPU basis.
> 
> All the registers to do with the first 32 interrupts in the distributer
> are banked - the enable, configuration, and priority registers are all
> only accessible to the specific CPU which owns the PPIs and SGIs.

Indeed. The major difference is that the configuration registers for the
PPIs seem to be writable on MSM (11MP and A9 have them RO).

	M.
-- 
Jazz is not dead. It just smells funny...

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/