Re: PME via interrupt or SCI mechanism?

[Sarah Sharp]

On Fri, Sep 30, 2011 at 10:21:06PM +0200, Rafael J. Wysocki wrote:
> OK, please test the appended patch.  The difference is that it should only
> continuously poll devices that don't get notifications.  You'll still see
> the debug messages from your previous patches, but this one should be a bit
> less wasteful than the previous one in general.

This patch seems to work.  The GPE fires and the xHCI host controller
comes out of D3 after a stream of:

Sep 30 17:07:32 talon kernel: [  197.745312] ehci_hcd 0000:00:1d.0: pci_acpi_wake_dev
Sep 30 17:07:32 talon kernel: [  197.745321] ehci_hcd 0000:00:1a.0: pci_acpi_wake_dev
Sep 30 17:07:32 talon kernel: [  197.745326] snd_hda_intel 0000:00:1b.0: pci_acpi_wake_dev
Sep 30 17:07:32 talon kernel: [  197.745331] e1000e 0000:00:19.0: pci_acpi_wake_dev

It does seem to take less time to come out of D3 than the previous patch
though.

I occasionally do not see the host controller come out of D3 when I plug
in a new device, but the interrupt count for GPE 0D doesn't increment
when that happens, so it's probably just a BIOS or hardware bug.  Did
mention this was bleeding edge hardware?

Sarah Sharp
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/