[PATCH net-next 2/5] ixgbevf: Convert printks to pr_<level>
From: Joe Perches
Date: Wed Oct 12 2011 - 12:18:40 EST
Use the current logging styles, prefix output with "ixgbevf: "
Add #define pr_fmt
Coalesce formats.
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/net/ethernet/intel/ixgbevf/ethtool.c | 6 +++-
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 26 ++++++++++----------
2 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
index e29ba45..c9c084b 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
@@ -27,6 +27,8 @@
/* ethtool support for ixgbevf */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -549,8 +551,8 @@ static const u32 register_test_patterns[] = {
writel((W & M), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if ((W & M) != (val & M)) { \
- printk(KERN_ERR "set/check reg %04X test failed: got 0x%08X " \
- "expected 0x%08X\n", R, (val & M), (W & M)); \
+ pr_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", \
+ R, (val & M), (W & M)); \
*data = R; \
writel(before, (adapter->hw.hw_addr + R)); \
return 1; \
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 4930c46..51e944d 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -29,6 +29,9 @@
/******************************************************************************
Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code
******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/bitops.h>
#include <linux/module.h>
@@ -1437,7 +1440,7 @@ static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
int count = 0;
if ((netdev_uc_count(netdev)) > 10) {
- printk(KERN_ERR "Too many unicast filters - No Space\n");
+ pr_err("Too many unicast filters - No Space\n");
return -ENOSPC;
}
@@ -2135,7 +2138,7 @@ static int ixgbevf_init_interrupt_scheme(struct ixgbevf_adapter *adapter)
err = ixgbevf_alloc_queues(adapter);
if (err) {
- printk(KERN_ERR "Unable to allocate memory for queues\n");
+ pr_err("Unable to allocate memory for queues\n");
goto err_alloc_queues;
}
@@ -2189,7 +2192,7 @@ static int __devinit ixgbevf_sw_init(struct ixgbevf_adapter *adapter)
} else {
err = hw->mac.ops.init_hw(hw);
if (err) {
- printk(KERN_ERR "init_shared_code failed: %d\n", err);
+ pr_err("init_shared_code failed: %d\n", err);
goto out;
}
}
@@ -2630,8 +2633,7 @@ static int ixgbevf_open(struct net_device *netdev)
* the vf can't start. */
if (hw->adapter_stopped) {
err = IXGBE_ERR_MBX;
- printk(KERN_ERR "Unable to start - perhaps the PF"
- " Driver isn't up yet\n");
+ pr_err("Unable to start - perhaps the PF Driver isn't up yet\n");
goto err_setup_reset;
}
}
@@ -2842,10 +2844,8 @@ static bool ixgbevf_tx_csum(struct ixgbevf_adapter *adapter,
break;
default:
if (unlikely(net_ratelimit())) {
- printk(KERN_WARNING
- "partial checksum but "
- "proto=%x!\n",
- skb->protocol);
+ pr_warn("partial checksum but proto=%x!\n",
+ skb->protocol);
}
break;
}
@@ -3414,7 +3414,7 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->dev_addr)) {
- printk(KERN_ERR "invalid MAC address\n");
+ pr_err("invalid MAC address\n");
err = -EIO;
goto err_sw_init;
}
@@ -3535,10 +3535,10 @@ static struct pci_driver ixgbevf_driver = {
static int __init ixgbevf_init_module(void)
{
int ret;
- printk(KERN_INFO "ixgbevf: %s - version %s\n", ixgbevf_driver_string,
- ixgbevf_driver_version);
+ pr_info("%s - version %s\n",
+ ixgbevf_driver_string, ixgbevf_driver_version);
- printk(KERN_INFO "%s\n", ixgbevf_copyright);
+ pr_info("%s\n", ixgbevf_copyright);
ret = pci_register_driver(&ixgbevf_driver);
return ret;
--
1.7.6.405.gc1be0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/