[PATCH 1/8] pci: Make sriov work with hotplug removal

[Yinghai Lu]

When hot remove pci express module, got

[ 5918.610127] pciehp 0000:80:02.2:pcie04: pcie_isr: intr_loc 1
[ 5918.615779] pciehp 0000:80:02.2:pcie04: Attention button interrupt received
[ 5918.622730] pciehp 0000:80:02.2:pcie04: Button pressed on Slot(3)
[ 5918.629002] pciehp 0000:80:02.2:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 1f9
[ 5918.637416] pciehp 0000:80:02.2:pcie04: PCI slot #3 - powering off due to button press.
[ 5918.647125] pciehp 0000:80:02.2:pcie04: pcie_isr: intr_loc 10
[ 5918.653039] pciehp 0000:80:02.2:pcie04: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200
[ 5918.661229] pciehp 0000:80:02.2:pcie04: pciehp_set_attention_status: SLOTCTRL a8 write cmd c0
[ 5924.667627] pciehp 0000:80:02.2:pcie04: Disabling domain:bus:device=0000:b0:00
[ 5924.674909] pciehp 0000:80:02.2:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 2f9
[ 5924.683262] pciehp 0000:80:02.2:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:b0:00
[ 5924.693976] libfcoe_device_notification: NETDEV_UNREGISTER eth6
[ 5924.764979] libfcoe_device_notification: NETDEV_UNREGISTER eth14
[ 5924.873539] libfcoe_device_notification: NETDEV_UNREGISTER eth15
[ 5924.995209] libfcoe_device_notification: NETDEV_UNREGISTER eth16
[ 5926.114407] sxge 0000:b2:00.0: PCI INT A disabled
[ 5926.119342] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 5926.127189] IP: [<ffffffff81353a3b>] pci_stop_bus_device+0x33/0x83
[ 5926.133377] PGD 0
[ 5926.135402] Oops: 0000 [#1] SMP
[ 5926.138659] CPU 2
[ 5926.140499] Modules linked in:
...
[ 5926.143754]
[ 5926.275823] Call Trace:
[ 5926.278267]  [<ffffffff81353a38>] pci_stop_bus_device+0x30/0x83
[ 5926.284180]  [<ffffffff81353af4>] pci_remove_bus_device+0x1a/0xba
[ 5926.290264]  [<ffffffff81366311>] pciehp_unconfigure_device+0x110/0x17b
[ 5926.296866]  [<ffffffff81365dd9>] ? pciehp_disable_slot+0x188/0x188
[ 5926.303123]  [<ffffffff81365d6f>] pciehp_disable_slot+0x11e/0x188
[ 5926.309206]  [<ffffffff81365e68>] pciehp_power_thread+0x8f/0xe0
...

Root cause: when doing pci_stop_bus_device() with phys fn, it will stop virt fn and
remove the fn, so
	list_for_each_safe(l, n, &bus->devices)
will have problem to refer freed n that is pointed to vf entry.

Solution is just call pci_stop_bus_device() with phys fn only. and before that need to
save phys fn aside and avoid to use bus->devices to loop.

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

---
 drivers/pci/remove.c |   33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Index: linux-2.6/drivers/pci/remove.c
===================================================================
--- linux-2.6.orig/drivers/pci/remove.c
+++ linux-2.6/drivers/pci/remove.c
@@ -120,10 +120,43 @@ void pci_remove_behind_bridge(struct pci
 			pci_remove_bus_device(pci_dev_b(l));
 }
 
+struct dev_list {
+	struct pci_dev *dev;
+	struct list_head list;
+};
+
 static void pci_stop_bus_devices(struct pci_bus *bus)
 {
 	struct list_head *l, *n;
+	struct dev_list *dl, *dn;
+	LIST_HEAD(physfn_list);
+
+	/* Save phys_fn aside at first */
+	list_for_each(l, &bus->devices) {
+		struct pci_dev *dev = pci_dev_b(l);
+
+		if (!dev->is_virtfn) {
+			dl = kmalloc(sizeof(*dl), GFP_KERNEL);
+			if (!dl)
+				continue;
+			dl->dev = dev;
+			list_add_tail(&dl->list, &physfn_list);
+		}
+	}
+
+	/*
+	 * stop bus device for phys_fn at first
+	 *  it will stop and remove vf in driver remove action
+	 */
+	list_for_each_entry_safe(dl, dn, &physfn_list, list) {
+		struct pci_dev *dev = dl->dev;
+
+		pci_stop_bus_device(dev);
+
+		kfree(dl);
+	}
 
+	/* Do it again for left over in case */
 	list_for_each_safe(l, n, &bus->devices) {
 		struct pci_dev *dev = pci_dev_b(l);
 		pci_stop_bus_device(dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/