Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B

[Giuseppe CAVALLARO]

On 10/21/2011 7:33 PM, Wu Zhangjin wrote:
> On Fri, Oct 21, 2011 at 6:28 PM,  <keguang.zhang@xxxxxxxxx> wrote:
>> From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
>>
>> This patch adds basic platform support for Loongson1B
>> including serial port, ethernet, and interrupt handler.
>>
>> Loongson1B UART is compatible with NS16550A.
>> Loongson1B GMAC is built around Synopsys IP Core.
>>
> 
> Perhaps you'd better split out the GMAC support to its own patch and
> send it to the net/ maintainer and the authors of the original files.

Also suggest you to provide the stmmac patches for net-next.
The stmmac driver has been recently updated and I've also several
patches to commit (for example for PCI etc) on it.

I'm happy that the support for big endianess arrived.
I supported a guy some time ago but he didn't provided me the patches
tested on his side :-(. So welcome yours and many thanks Kelvin!

Please send the stmmac patches and add me on CC. I'm happy to help you
on reviewing them.

>> diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h
>> index 63a03e2..4db27d0 100644
>> --- a/drivers/net/stmmac/descs.h
>> +++ b/drivers/net/stmmac/descs.h
>> @@ -53,6 +53,38 @@ struct dma_desc {
>>                        u32 reserved3:5;
>>                        u32 disable_ic:1;
>>                } rx;
>> +#ifdef CONFIG_MACH_LOONGSON1
>> +               struct {
>> +                       /* RDES0 */
>> +                       u32 payload_csum_error:1;
>> +                       u32 crc_error:1;
>> +                       u32 dribbling:1;
>> +                       u32 error_gmii:1;
>> +                       u32 receive_watchdog:1;
>> +                       u32 frame_type:1;
>> +                       u32 late_collision:1;
>> +                       u32 ipc_csum_error:1;
>> +                       u32 last_descriptor:1;
>> +                       u32 first_descriptor:1;
>> +                       u32 vlan_tag:1;
>> +                       u32 overflow_error:1;
>> +                       u32 length_error:1;
>> +                       u32 sa_filter_fail:1;
>> +                       u32 descriptor_error:1;
>> +                       u32 error_summary:1;
>> +                       u32 frame_length:14;
>> +                       u32 da_filter_fail:1;
>> +                       u32 own:1;
>> +                       /* RDES1 */
>> +                       u32 buffer1_size:11;
>> +                       u32 buffer2_size:11;
>> +                       u32 reserved1:2;
>> +                       u32 second_address_chained:1;
>> +                       u32 end_ring:1;
>> +                       u32 reserved2:5;
>> +                       u32 disable_ic:1;
>> +               } erx;          /* -- enhanced -- */
>> +#else
>>                struct {
>>                        /* RDES0 */
>>                        u32 payload_csum_error:1;
>> @@ -83,6 +115,7 @@ struct dma_desc {
>>                        u32 reserved2:2;
>>                        u32 disable_ic:1;
>>                } erx;          /* -- enhanced -- */
>> +#endif
>>
>>                /* Transmit descriptor */
>>                struct {
>> @@ -113,6 +146,40 @@ struct dma_desc {
>>                        u32 last_segment:1;
>>                        u32 interrupt:1;
>>                } tx;
>> +#ifdef CONFIG_MACH_LOONGSON1
>> +               struct {
>> +                       /* TDES0 */
>> +                       u32 deferred:1;
>> +                       u32 underflow_error:1;
>> +                       u32 excessive_deferral:1;
>> +                       u32 collision_count:4;
>> +                       u32 vlan_frame:1;
>> +                       u32 excessive_collisions:1;
>> +                       u32 late_collision:1;
>> +                       u32 no_carrier:1;
>> +                       u32 loss_carrier:1;
>> +                       u32 payload_error:1;
>> +                       u32 frame_flushed:1;
>> +                       u32 jabber_timeout:1;
>> +                       u32 error_summary:1;
>> +                       u32 ip_header_error:1;
>> +                       u32 time_stamp_status:1;
>> +                       u32 reserved1:13;
>> +                       u32 own:1;
>> +                       /* TDES1 */
>> +                       u32 buffer1_size:11;
>> +                       u32 buffer2_size:11;
>> +                       u32 time_stamp_enable:1;
>> +                       u32 disable_padding:1;
>> +                       u32 second_address_chained:1;
>> +                       u32 end_ring:1;
>> +                       u32 crc_disable:1;
>> +                       u32 checksum_insertion:2;
>> +                       u32 first_segment:1;
>> +                       u32 last_segment:1;
>> +                       u32 interrupt:1;
>> +               } etx;          /* -- enhanced -- */
>> +#else
>>                struct {
>>                        /* TDES0 */
>>                        u32 deferred:1;
>> @@ -148,6 +215,7 @@ struct dma_desc {
>>                        u32 buffer2_size:13;
>>                        u32 reserved4:3;
>>                } etx;          /* -- enhanced -- */
>> +#endif
>>        } des01;
>>        unsigned int des2;
>>        unsigned int des3;
> 
> 
> If the difference is very much, perhaps a new dma_desc struct can be
> defined instead.
> 

Concerning the descriptors, we could have two different files:

descs_le.h
descs_be.h

and select their inclusion inside the common.h.

Please use instead of the macro CONFIG_MACH_LOONGSON1 another one more
generic e.g. CONFIG_STMMAC_BE  (and add it in the driver's Kconfig).

On your platform you will have to enable it by default.
Or it could be the default on MIPS: LE will be on ARM and SuperH.

>> diff --git a/drivers/net/stmmac/enh_desc.c b/drivers/net/stmmac/enh_desc.c
>> index e5dfb6a..3b5e4f1 100644
>> --- a/drivers/net/stmmac/enh_desc.c
>> +++ b/drivers/net/stmmac/enh_desc.c
>> @@ -108,6 +108,7 @@ static int enh_desc_get_tx_len(struct dma_desc *p)
>>  static int enh_desc_coe_rdes0(int ipc_err, int type, int payload_err)
>>  {
>>        int ret = good_frame;
>> +#ifndef CONFIG_MACH_LOONGSON1
>>        u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7;
>>
>>        /* bits 5 7 0 | Frame status
>> @@ -145,6 +146,7 @@ static int enh_desc_coe_rdes0(int ipc_err, int type, int payload_err)
>>                CHIP_DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n");
>>                ret = discard_frame;
>>        }
>> +#endif
>>        return ret;
>>  }

>>
>> @@ -232,9 +234,17 @@ static void enh_desc_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
>>        int i;
>>        for (i = 0; i < ring_size; i++) {
>>                p->des01.erx.own = 1;
>> +#ifdef CONFIG_MACH_LOONGSON1
>> +               p->des01.erx.buffer1_size = BUF_SIZE_2KiB - 1;
>> +#else
>>                p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1;
>> +#endif
>>                /* To support jumbo frames */
>> +#ifdef CONFIG_MACH_LOONGSON1
>> +               p->des01.erx.buffer2_size = BUF_SIZE_2KiB - 1;
>> +#else
>>                p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1;
>> +#endif
>>                if (i == ring_size - 1)
>>                        p->des01.erx.end_ring = 1;
>>                if (disable_rx_ic)
>> @@ -292,9 +302,15 @@ static void enh_desc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
>>                                     int csum_flag)
>>  {
>>        p->des01.etx.first_segment = is_fs;
>> +#ifdef CONFIG_MACH_LOONGSON1
>> +       if (unlikely(len > BUF_SIZE_2KiB)) {
>> +               p->des01.etx.buffer1_size = BUF_SIZE_2KiB - 1;
>> +               p->des01.etx.buffer2_size = len - BUF_SIZE_2KiB + 1;
>> +#else
>>        if (unlikely(len > BUF_SIZE_4KiB)) {
>>                p->des01.etx.buffer1_size = BUF_SIZE_4KiB;
>>                p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB;
>> +#endif
>>        } else {
>>                p->des01.etx.buffer1_size = len;
>>        }

No. I do not want to see all these ifdef inside the code.
I had to rework some driver's part just last week to avoid this kind of
code. I suggest you to re-base the work against the net-next kernel and
look at how the ring/chained modes have been managed.

I added a new file called descs_com.h that you can re-use adding small
inline functions where define the changes for be mode.

> Is it possible to add two new macros RX_BUF_SIZE and TX_BUF_SIZE to .h
> instead? which may reduce code duplication.

This code exists because we have to properly handle the jumbo frames.

Note that this code has been reworked to use the ring/chained modes.
Take a look at descs_com.h.

I expect to see the driver on your platform that uses jumbo and
chained/ring modes.

Best Regards
Giuseppe

> 
> Regards,
> Wu Zhangjin
> 
>> --
>> 1.7.1
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/