linux-next: manual merge of the arm-soc tree with the arm tree

[Stephen Rothwell]

Hi Arnd,

Today's linux-next merge of the arm-soc tree got a conflict in
arch/arm/common/gic.c between commits 292b293ceef2 ("ARM: gic:
consolidate PPI handling") and 28af690a284d ("ARM: gic, local timers: use
the request_percpu_irq() interface") from the arm tree and commits
2071a2a4b8ed ("ARM: gic: add irq_domain support") and e3f14d321b34 ("ARM:
gic: add OF based initialization") from the arm-soc tree.

I hacked it up (almost certainly incorrectly - see below). Someone will
have to provide Linus with a fix for this.
-- 
Cheers,
Stephen Rothwell                    sfr@xxxxxxxxxxxxxxxx

diff --cc arch/arm/common/gic.c
index 016c1ae,65cf39d..0000000
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@@ -29,9 -29,10 +29,13 @@@
  #include <linux/cpu_pm.h>
  #include <linux/cpumask.h>
  #include <linux/io.h>
 +#include <linux/interrupt.h>
 +#include <linux/percpu.h>
 +#include <linux/slab.h>
+ #include <linux/of.h>
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
+ #include <linux/irqdomain.h>
  
  #include <asm/irq.h>
  #include <asm/mach/irq.h>
@@@ -259,14 -259,14 +262,15 @@@ void __init gic_cascade_irq(unsigned in
  	irq_set_chained_handler(irq, gic_handle_cascade_irq);
  }
  
- static void __init gic_dist_init(struct gic_chip_data *gic,
- 	unsigned int irq_start)
+ static void __init gic_dist_init(struct gic_chip_data *gic)
  {
- 	unsigned int gic_irqs, irq_limit, i;
+ 	unsigned int i, irq;
  	u32 cpumask;
+ 	unsigned int gic_irqs = gic->gic_irqs;
+ 	struct irq_domain *domain = &gic->domain;
  	void __iomem *base = gic->dist_base;
  	u32 cpu = 0;
 +	u32 nrppis = 0, ppi_base = 0;
  
  #ifdef CONFIG_SMP
  	cpu = cpu_logical_map(smp_processor_id());
@@@ -279,34 -279,6 +283,23 @@@
  	writel_relaxed(0, base + GIC_DIST_CTRL);
  
  	/*
- 	 * Find out how many interrupts are supported.
- 	 * The GIC only supports up to 1020 interrupt sources.
- 	 */
- 	gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f;
- 	gic_irqs = (gic_irqs + 1) * 32;
- 	if (gic_irqs > 1020)
- 		gic_irqs = 1020;
- 
- 	gic->gic_irqs = gic_irqs;
- 
- 	/*
 +	 * Nobody would be insane enough to use PPIs on a secondary
 +	 * GIC, right?
 +	 */
 +	if (gic == &gic_data[0]) {
 +		nrppis = (32 - irq_start) & 31;
 +
 +		/* The GIC only supports up to 16 PPIs. */
 +		if (nrppis > 16)
 +			BUG();
 +
 +		ppi_base = gic->irq_offset + 32 - nrppis;
 +	}
 +
 +	pr_info("Configuring GIC with %d sources (%d PPIs)\n",
 +		gic_irqs, (gic == &gic_data[0]) ? nrppis : 0);
 +
 +	/*
  	 * Set all global interrupts to be level triggered, active low.
  	 */
  	for (i = 32; i < gic_irqs; i += 16)
@@@ -332,29 -304,12 +325,22 @@@
  		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
  
  	/*
- 	 * Limit number of interrupts registered to the platform maximum
- 	 */
- 	irq_limit = gic->irq_offset + gic_irqs;
- 	if (WARN_ON(irq_limit > NR_IRQS))
- 		irq_limit = NR_IRQS;
- 
- 	/*
  	 * Setup the Linux IRQ subsystem.
  	 */
 +	for (i = 0; i < nrppis; i++) {
 +		int ppi = i + ppi_base;
 +
 +		irq_set_percpu_devid(ppi);
 +		irq_set_chip_and_handler(ppi, &gic_chip,
 +					 handle_percpu_devid_irq);
 +		irq_set_chip_data(ppi, gic);
 +		set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN);
 +	}
 +
- 	for (i = irq_start + nrppis; i < irq_limit; i++) {
- 		irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
- 		irq_set_chip_data(i, gic);
- 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ 	irq_domain_for_each_irq(domain, i, irq) {
+ 		irq_set_chip_and_handler(irq, &gic_chip, handle_fasteoi_irq);
+ 		irq_set_chip_data(irq, gic);
+ 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
  	}
  
  	writel_relaxed(1, base + GIC_DIST_CTRL);

Attachment: pgp00000.pgp
Description: PGP signature