Re: PROBLEM: Kernel panic and system crash during RAID disk failure

[Yongqiang Yang]

On Mon, Oct 31, 2011 at 12:51 PM, Darko <darko@xxxxxxxxxx> wrote:
> Hi Yongqiang,
>
> I am using kernel version 3.0.8. Looking through the file super.c, the file
> already has the code mentioned on the web. I also noticed the date of the
> post (http://lists.openwall.net/linux-ext4/2011/03/29/5) is back from March
> of 2011. I think the bug I reported here was not fixed by that patch since
> the kernel version I am using is much newer than March 2011.
Could you post out the dmesg log printed by 3.0.8 or 3.1?

Yongqiang.
>
> I am not sure if I understand what you mean by "commit 0449641130 ext4"?
>
> Thanks,
>
> Darko
>
>
> On Mon, 31 Oct 2011, Yongqiang Yang wrote:
>
>> Date: Mon, 31 Oct 2011 12:25:18 +0800
>> From: Yongqiang Yang <xiaoqiangnk@xxxxxxxxx>
>> To: Darko <darko@xxxxxxxxxx>
>> Cc: NeilBrown <neilb@xxxxxxx>, Thomas Gleixner <tglx@xxxxxxxxxxxxx>,
>>    linux-kernel@xxxxxxxxxxxxxxx, linux-ext4@xxxxxxxxxxxxxxx
>> Subject: Re: PROBLEM: Kernel panic and system crash during RAID disk
>> failure
>>
>> Hi Darko,
>>
>> The bug has been fixed by commit 0449641130 ext4: Init timer earlier
>> to avoid a kernel panic in __save_error_info.
>> http://lists.openwall.net/linux-ext4/2011/03/29/5
>>
>>
>> I suspect you mounted ext2/3 partition using ext4 module.
>>
>>
>> Yongqiang.
>>
>> On Mon, Oct 31, 2011 at 11:13 AM, Darko <darko@xxxxxxxxxx> wrote:
>>>
>>> Thank you for your reply!
>>>
>>> I wanted to add to this that I was able to replicate the problem with
>>> ext3
>>> and ext2 file systems as well. They both hard lock the system, and the
>>> only
>>> way to recovery is to push the reset button. I can see the trace error on
>>> the screen, but I am unable to do anything with it, since it goes by so
>>> fast
>>> that the portion which says "kernel BUG" is invisible. I assume they both
>>> have similar issues with the code in kernel/timer.c
>>>
>>> On the other hand, I tried using raiserfs 3.5 tonight, and I got
>>> input/output error as expected. The system did not crash. Just another
>>> proof
>>> that a bug is laying somewhere in the ext2/3/4 file system.
>>>
>>> When someone comes up with a patch, I am willing to try it out and feed
>>> you
>>> back with the report.
>>>
>>> Hope this helps.
>>>
>>> Thank You,
>>>
>>> Darko Kraus
>>>
>>>
>>> On Sun, 30 Oct 2011, NeilBrown wrote:
>>>
>>>> Date: Sun, 30 Oct 2011 19:05:48 +1100
>>>> From: NeilBrown <neilb@xxxxxxx>
>>>> To: Darko <darko@xxxxxxxxxx>
>>>> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx,
>>>>    linux-ext4@xxxxxxxxxxxxxxx
>>>> Subject: Re: PROBLEM: Kernel panic and system crash during RAID disk
>>>> failure
>>>>
>>>> On Sun, 30 Oct 2011 03:27:28 -0400 (EDT) Darko <darko@xxxxxxxxxx> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> I have been doing some testing with the md RAID driver and I think I
>>>>> discovered a problem with it.
>>>>> Everything was performed on a system with a single hard drive using
>>>>> loop
>>>>> devices as virtual raid devices.
>>>>> So here is the setup:
>>>>> /dev/sdc is my main drive that hold entire Linux OS and has one
>>>>> partition.
>>>>> in the /tmp I created 7 files, 100MB each and associated them with loop
>>>>> devices:
>>>>>
>>>>> losetup -a
>>>>> /dev/loop0: [0821]:294820 (/var/tmp/raid-0)
>>>>> /dev/loop1: [0821]:294857 (/var/tmp/raid-1)
>>>>> /dev/loop2: [0821]:300120 (/var/tmp/raid-2)
>>>>> /dev/loop3: [0821]:301073 (/var/tmp/raid-3)
>>>>> /dev/loop4: [0821]:301074 (/var/tmp/raid-4)
>>>>> /dev/loop5: [0821]:301075 (/var/tmp/raid-5)
>>>>> /dev/loop6: [0821]:301076 (/var/tmp/raid-6)
>>>>>
>>>>> The next step was, created an RAID6 array:
>>>>> mdadm --create /dev/md10 --level=6 -raid-deviced=7 /dev/loop[0-6]
>>>>>
>>>>> Here is how it looks so far:
>>>>>
>>>>> cat /proc/mdstat
>>>>> Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
>>>>> md10 : active raid6 loop6[6] loop5[5] loop4[4] loop3[3] loop2[2]
>>>>> loop1[1]
>>>>> loop0[0]
>>>>>       499200 blocks super 1.2 level 6, 512k chunk, algorithm 2 [7/7]
>>>>> [UUUUUUU]
>>>>>
>>>>>
>>>>> Then the filesystem...
>>>>> mkfs.ext4 -b 4096 -i 4096 -m 0 /dev/md10
>>>>>
>>>>> Mounting the file system to a folder called 'A' right in the root of my
>>>>> system:
>>>>>
>>>>> mount /dev/md10 /A
>>>>>
>>>>> Then I copied a few files on that file system. So far everything is
>>>>> good.
>>>>>
>>>>> Then I purposly failed 2 drives:
>>>>> mdadm --manage /dev/md10 --fail /dev/loop0
>>>>> mdadm --manage /dev/md10 --fail /dev/loop1
>>>>>
>>>>> The array continues to run fine in degraded mode. I was wondering what
>>>>> would happen if another drive fails. So while I was doing a write
>>>>> operating right in that filesystem (/dev/md10) using:
>>>>> dd if=/dev/zero of=testfile bs=1k count=360000  ...
>>>>>
>>>>> ...quickly switched to a different console and entered the command:
>>>>> mdadm --manage /dev/md10 --fail /dev/loop2
>>>>>
>>>>> ...which made 3 failed drives and the array can no longer work...
>>>>>
>>>>> Well I would be happy to see just the array not working, but kernel
>>>>> panic
>>>>> in both versions 2.6.37.4 and 3.0.8 made me worry that it is serious
>>>>> bug
>>>>> and appears to be in older and newer kernels as well.
>>>>> I repeated this several times, and mostly the machine gets locked up
>>>>> with
>>>>> kernel panic. But once I was able to get it not to lock up all the way,
>>>>> and that is how I have dmesg output.
>>>>>
>>>>> The attached files include dmesg from the system startup until the bug
>>>>> trace, and some additional information regarding my system that might
>>>>> be
>>>>> helpful.
>>>>>
>>>>> For any additional question, please feel free to contact me!
>>>>>
>>>>> I hope this info helps someone find and resolve the problem in the
>>>>> code.
>>>>>
>>>>
>>>> The important part of your kernel log message is:
>>>>
>>>>
>>>> [ 1227.766202] ------------[ cut here ]------------
>>>> [ 1227.766259] kernel BUG at kernel/timer.c:681!
>>>> [ 1227.766311] invalid opcode: 0000 [#1] SMP
>>>> [ 1227.766365] last sysfs file: /sys/devices/virtual/block/md10/dev
>>>> [ 1227.766419] Modules linked in:
>>>> [ 1227.766471]
>>>> [ 1227.766520] Pid: 1507, comm: mount Not tainted 2.6.37.6-v5.0 #7
>>>> MICRO-STAR INTERNATIONAL CO., LTD MS-7142/MS-7142
>>>> [ 1227.766633] EIP: 0060:[<c104f960>] EFLAGS: 00010246 CPU: 0
>>>> [ 1227.766690] EIP is at mod_timer+0x210/0x250
>>>> [ 1227.766742] EAX: 00000000 EBX: f5494e1c ECX: 00000000 EDX: 00000000
>>>> [ 1227.766796] ESI: 00000000 EDI: 05348416 EBP: f54a3c90 ESP: f54a3c74
>>>> [ 1227.766851]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
>>>> [ 1227.766904] Process mount (pid: 1507, ti=f54a2000 task=f2068880
>>>> task.ti=f54a2000)
>>>> [ 1227.767002] Stack:
>>>> [ 1227.767003]  f2068880 f54b159c 00000010 00000000 f1f8e400 f4efc57c
>>>> 0000128d f54a3ca8
>>>> [ 1227.767003]  c11cb7ba c17d4e52 f4efc400 00000124 00000000 f54a3cb4
>>>> c11ce4e6 ecee6318
>>>> [ 1227.767003]  f54a3cdc c11cf7cc ecec7578 00000124 00000000 f4efc400
>>>> f54a3cd4 00000124
>>>> [ 1227.767003] Call Trace:
>>>> [ 1227.767003]  [<c11cb7ba>] ? __save_error_info.clone.61+0x7a/0xf0
>>>> [ 1227.767003]  [<c11ce4e6>] ? save_error_info+0x16/0x30
>>>> [ 1227.767003]  [<c11cf7cc>] ? ext4_error_inode+0x4c/0xf0
>>>> [ 1227.767003]  [<c11b57e1>] ? __ext4_get_inode_loc+0x201/0x410
>>>> [ 1227.767003]  [<c110b62a>] ? inode_init_always+0x1aa/0x1c0
>>>> [ 1227.767003]  [<c11b72f9>] ? ext4_iget+0x59/0x6f0
>>>> [ 1227.767003]  [<c11d2716>] ? ext4_fill_super+0x1ab6/0x2c70
>>>> [ 1227.767003]  [<c114896f>] ? disk_name+0xbf/0xd0
>>>> [ 1227.767003]  [<c10fa119>] ? mount_bdev+0x179/0x1c0
>>>> [ 1227.767003]  [<c11d0c60>] ? ext4_fill_super+0x0/0x2c70
>>>> [ 1227.767003]  [<c11ca17f>] ? ext4_mount+0x1f/0x30
>>>> [ 1227.767003]  [<c11d0c60>] ? ext4_fill_super+0x0/0x2c70
>>>> [ 1227.767003]  [<c10f9835>] ? vfs_kern_mount+0x75/0x250
>>>> [ 1227.767003]  [<c110df03>] ? get_fs_type+0x33/0xb0
>>>> [ 1227.767003]  [<c11ca160>] ? ext4_mount+0x0/0x30
>>>> [ 1227.767003]  [<c10f9a6e>] ? do_kern_mount+0x3e/0xe0
>>>> [ 1227.767003]  [<c111080f>] ? do_mount+0x35f/0x6b0
>>>> [ 1227.767003]  [<c10d47c9>] ? strndup_user+0x49/0x70
>>>> [ 1227.767003]  [<c1110e0b>] ? sys_mount+0x6b/0xa0
>>>> [ 1227.767003]  [<c17b550c>] ? syscall_call+0x7/0xb
>>>> [ 1227.767003] Code: fe ff ff 8b 0e 89 4d e4 8b 46 04 83 c6 08 89 f9 89
>>>> da
>>>> ff 55 e4 8b 06 85 c0 89 45 e4 75 ea e9 aa fe ff ff 8b 75 ec e9 ee fe ff
>>>> ff
>>>> <0f> 0b 8b 55 04 89 d8 e8 34 f9 ff ff e9 2a fe ff ff 8b 35 30 b8
>>>> [ 1227.767003] EIP: [<c104f960>] mod_timer+0x210/0x250 SS:ESP
>>>> 0068:f54a3c74
>>>> [ 1227.770073] ---[ end trace d7b3d7a67954d202 ]---
>>>>
>>>>
>>>> which happens after:
>>>>
>>>> [ 1137.167043] Aborting journal on device md10-8.
>>>> [ 1137.167058] Buffer I/O error on device md10, logical block 139265
>>>> [ 1137.167060] lost page write due to I/O error on md10
>>>> [ 1137.167065] JBD2: I/O error detected when updating journal superblock
>>>> for md10-8.
>>>> [ 1137.660922] Buffer I/O error on device md10, logical block 1
>>>> [ 1137.660926] lost page write due to I/O error on md10
>>>> [ 1137.660932] EXT4-fs error (device md10): ext4_journal_start_sb:260:
>>>> Detected aborted journal
>>>> [ 1137.661046] EXT4-fs (md10): Remounting filesystem read-only
>>>> [ 1137.661103] EXT4-fs (md10): previous I/O error to superblock detected
>>>> [ 1137.661313] Buffer I/O error on device md10, logical block 1
>>>> [ 1137.661315] lost page write due to I/O error on md10
>>>> [ 1219.891363] EXT4-fs (md10): previous I/O error to superblock detected
>>>> [ 1220.050654] Buffer I/O error on device md10, logical block 1
>>>> [ 1220.050657] lost page write due to I/O error on md10
>>>> [ 1220.050663] EXT4-fs error (device md10): ext4_put_super:728: Couldn't
>>>> clean up the journal
>>>>
>>>> and some more "Buffer I/O error"s.
>>>>
>>>> So it looks like an ext4 issue.
>>>>
>>>> I have Cc:ed the appropriate list.
>>>>
>>>> Thanks for the report.
>>>>
>>>> NeilBrown
>>>>
>>>>
>>>
>>>
>>> --
>>> Darko Kraus
>>> Enterprise Network Administrator
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel"
>>> in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>> Please read the FAQ at  http://www.tux.org/lkml/
>>>
>>
>>
>>
>> --
>> Best Wishes
>> Yongqiang Yang
>>
>
>
> --
> Darko Kraus
> Enterprise Network Administrator



-- 
Best Wishes
Yongqiang Yang
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/