RE: [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain

[Voss, Nikolaus]

Hi Havard,

> {sda,scl}_is_open_drain indicates that the GPIO hardware is set up to
> do open drain so the software doesn't have to, i.e.
> gpio_set_value(pin, 1) will turn off the output driver rather than
> drive the pin high, so the _val functions will do the right thing.

gpio_set_value(pin, 1) drives the output high same as
gpio_direction_output(pin, 1) does (documented in Documentation/gpio.txt),
so the gpio will be changed from open-drain to push-pull.

In contrast, gpio_direction_input(pin) will turn off the output driver.

Open-drain io is bound to "!is_open_drain" and push-pull io is bound to
"is_open_drain", so I still think this should be the other way round.

Niko

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/