RE: [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain
From: Voss, Nikolaus
Date: Wed Nov 02 2011 - 02:13:33 EST
> If the "is_open_drain" flags are not set, the I2C bus works correctly
> regardless of the existence of the pull-ups.
No, I2C can only work with anything pulling up SDA weakly, usually an
external pullup. This is independent of the "is_open_drain" property
which only describes how the driver internally accomplishes the high
impedance state.
SCL can be driven push-pull ("scl_is_output_only") but will not be
I2C-compliant any more (no clock stretching), and only clients not relying
on that feature will work.
Niko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/