Re: [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT
From: Nicolas Ferre
Date: Mon Dec 05 2011 - 06:40:00 EST
On 12/03/2011 06:56 AM, Jean-Christophe PLAGNIOL-VILLARD :
On 18:50 Fri 02 Dec , Nicolas Ferre wrote:
Add the Cadence macb ethernet controller in at91sam9g45 .dtsi and
enable it in at91sam9m10g45ek board device tree file.
Signed-off-by: Nicolas Ferre<nicolas.ferre@xxxxxxxxx>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 7 +++++++
arch/arm/boot/dts/at91sam9m10g45ek.dts | 6 ++++++
2 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index e89b1d7..67f94d3 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -101,6 +101,13 @@
atmel,use-dma-tx;
status = "disabled";
};
+
+ macb0: ethernet@fffbc000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg =<0xfffbc000 0x100>;
+ interrupts =<25 4>;
why?
It is the new AIC specification that was reworked in this patch:
https://lkml.org/lkml/2011/12/1/238
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 85b34f5..17377a2 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -30,6 +30,12 @@
usart1: serial@fff90000 {
status = "okay";
};
+
+ macb0: ethernet@fffbc000 {
+ local-mac-address = [3a 0e 03 04 05 06];
please drop this is not supposed to be in the dts but updated for each board
Yes, sure: I kept in because it was allowing me to test. But for sure,
this should go away...
Bye,
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/