Re: Unhandled IRQs on AMD E-450

[Jeroen Van den Keybus]

> The VT6308 is PCI, and you have only one bus.

There's also a bridge on the FCH: bus 0 dev. 14 fn. 4, but I see that
the memory and IO regions of the e1000 and the VT630x are withing the
range of the ASM108x bridge. Thanks for pointing that out.

> It's possible that
> 1) the ASM1083 does not react to changes of the PCI interrupt line, or
> 2) the interrupt controller ignores INTx_Deassert messages.

I'm a bit puzzled. The IOAPIC operates on external IRQ lines. So that
would mean the LAPICs ?

> I'm wondering what the difference between triggering an interrupt and
> reloading the driver is that makes it work again.  I'd guess that
> reattaching the driver reinitializes the interrupt, which would point
> to 2).

I tried irq_disable(); irq_enable(); in spurious.c. That didn't change
anything. Storm continues. Also important: from my logs it appears
that when a driver is reloaded, there is indeed no storm at all. In my
log posted at Dec. 6, that is clearly visible.

> All PCI interrupts (whether 'real' lines in hardware or emulated with
> PCIe messages) end up at the I/O-APIC.

That would mean that the IO-APIC would decode MSI messages. I don't
think it can do that. Would it not be possible that the PCI bus IRQ
lines are directly connected to the FCH IO-APIC inputs (and that the
ASM1083 INTx lines are simply not connected ?

(Makes me wonder why Asus did not simply use the existing PCI bridge
on the FCH, which BTW also seems to depend on the use of the external
INTx lines.)

> Check if a newer BIOS exists.

Did that. No newer version is available.

> Your trigger-interrupt patch would also be possible with firewire-ohci.

If this would work, you'd have to patch the drivers of all PCI
devices. I'd much rather do it by modifying something in the IRQ
handling code.

>> I'm thinking of immediately re-enabling the irqs after they've been
>> disabled in spurious.c.

> You could try free_irq/request_irq, but I guess you cannot do this
> directly from inside an interrupt handler.

No, I did irq_disable/irq_enable, which should directly call the
mask/unmask methods of the chip handler. I still must check that,
though, and especially if the correct handler is used. But as I said
before, it didn't seem to do the trick.

>> I also think that the following posts may refer to the same problem:

<< > That's similar symptoms, but completely different hardware.
At first sight, yes, but they still share some of the problem areas. I
justed wanted to point out possibly similar cases. Never mind.

(
>> http://ubuntuforums.org/showthread.php?t=1883854
Asus board with ASM1083 (same bridge).

>> https://lkml.org/lkml/2011/6/30/197
>> https://lkml.org/lkml/2011/10/14/146
Has device 1b21:1080 (same bridge) in its Asus system.

https://lkml.org/lkml/2011/10/22/157
Has a E35M1-M board (essentially the same board as the E45M1-M with
the AMD E350 instead of the E450)
)


J.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/