[PATCH RESEND 2/8] serial: 8250: Add ioctl to enable auto rs485 mode with some Exar UARTs

[Wolfram Sang]

From: Matthias Fuchs <mfuchs@xxxxxxxx>

Some Exar UARTs support an auto rs485 mode. In this mode
the UART's RTS# pin is activated during transmitting and
can be used to enable a rs485 line driver. This has nothing
to do with attempts to do this by manually asserting/
deasserting handshake lines in software.

Signed-off-by: Matthias Fuchs <mfuchs@xxxxxxxx>

[wsa] Replaced 0xbf with define, saved some line-breaks.

Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250.c  |   68 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/serial_reg.h |    1 +
 2 files changed, 69 insertions(+), 0 deletions(-)

diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index f8f2320..920b4df 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -38,6 +38,7 @@
 #include <linux/nmi.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -2698,6 +2699,72 @@ serial8250_type(struct uart_port *port)
 	return uart_config[type].name;
 }
 
+static int serial8250_ioctl_port(struct uart_port *port,
+		      unsigned int cmd, unsigned long arg)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	unsigned long flags;
+
+	switch (cmd) {
+	case TIOCSRS485:
+	{
+		struct serial_rs485 rs485ctrl;
+		unsigned char fctr, lcr;
+
+		if (port->type != PORT_16850)
+			return -ENOTTY;
+
+		if (copy_from_user(&rs485ctrl, (struct serial_rs485 *)arg,
+				   sizeof(rs485ctrl)))
+			return -EFAULT;
+
+		spin_lock_irqsave(&up->port.lock, flags);
+		lcr = serial_inp(up, UART_LCR);
+		serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
+		fctr = serial_inp(up, UART_FCTR);
+		if (rs485ctrl.flags & SER_RS485_ENABLED)
+			fctr |= UART_FCTR_RS485;
+		else
+			fctr &= ~UART_FCTR_RS485;
+		serial_outp(up, UART_FCTR, fctr);
+		serial_outp(up, UART_LCR, lcr);
+		spin_unlock_irqrestore(&up->port.lock, flags);
+		return 0;
+	}
+
+	case TIOCGRS485:
+	{
+		struct serial_rs485 rs485ctrl;
+		unsigned char lcr;
+
+		if (port->type != PORT_16850)
+			return -ENOTTY;
+
+		memset(&rs485ctrl, 0, sizeof(rs485ctrl));
+
+		spin_lock_irqsave(&up->port.lock, flags);
+		lcr = serial_inp(up, UART_LCR);
+		serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
+		if (serial_inp(up, UART_FCTR) & UART_FCTR_RS485)
+			rs485ctrl.flags = SER_RS485_ENABLED;
+		else
+			rs485ctrl.flags = 0;
+		serial_outp(up, UART_LCR, lcr);
+		spin_unlock_irqrestore(&up->port.lock, flags);
+
+		if (copy_to_user((struct serial_rs485 *)arg, &rs485ctrl,
+				 sizeof(rs485ctrl)))
+			return -EFAULT;
+		return 0;
+	}
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	return 0;
+}
+
 static struct uart_ops serial8250_pops = {
 	.tx_empty	= serial8250_tx_empty,
 	.set_mctrl	= serial8250_set_mctrl,
@@ -2717,6 +2784,7 @@ static struct uart_ops serial8250_pops = {
 	.request_port	= serial8250_request_port,
 	.config_port	= serial8250_config_port,
 	.verify_port	= serial8250_verify_port,
+	.ioctl		= serial8250_ioctl_port,
 #ifdef CONFIG_CONSOLE_POLL
 	.poll_get_char = serial8250_get_poll_char,
 	.poll_put_char = serial8250_put_poll_char,
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 8ce70d7..fb37c4f 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -201,6 +201,7 @@
 #define UART_FCTR_RTS_8DELAY	0x03
 #define UART_FCTR_IRDA		0x04  /* IrDa data encode select */
 #define UART_FCTR_TX_INT	0x08  /* Tx interrupt type select */
+#define UART_FCTR_RS485		0x08  /* Auto RS485 mode */
 #define UART_FCTR_TRGA		0x00  /* Tx/Rx 550 trigger table select */
 #define UART_FCTR_TRGB		0x10  /* Tx/Rx 650 trigger table select */
 #define UART_FCTR_TRGC		0x20  /* Tx/Rx 654 trigger table select */
-- 
1.7.7.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/