Re: [PATCH RESEND 0/8] serial: 8250: support hw-based RS485 directioncontrol

[Claudio Scordino]

Il 09/12/2011 18:07, Wolfram Sang ha scritto:
> Some 8250-variants control the direction pin for RS485 in hardware. Linux has
> RS485 support these days, so update the 8250-driver to adhere to that.
>
> Code is based on 3.2-rc4, tested on a OMAP-based custom board with a 16V2750.
> A git tree can be found here:
>
> 	git://git.pengutronix.de/git/wsa/linux-2.6.git 8250_rs485
>
> There is no code change since the initial post of this series. I updated some
> of the patch descriptions, though. A kind-of-ack from Claudio can be found here
> [1]. Please consider for inclusion.


Hi Wolfram,

	since the code has not been changed, my opinion remains that it is fine 
and it should enter mainline.

Best regards,

	Claudio
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/