Re: [RFC] virtio: use mandatory barriers for remote processor vdevs

From: Amos Kong
Date: Mon Dec 12 2011 - 18:56:55 EST


On 12/12/2011 01:12 PM, Rusty Russell wrote:
> On Mon, 12 Dec 2011 11:06:53 +0800, Amos Kong <akong@xxxxxxxxxx> wrote:
>> On 12/12/11 06:27, Benjamin Herrenschmidt wrote:
>>> On Sun, 2011-12-11 at 14:25 +0200, Michael S. Tsirkin wrote:
>>>
>>>> Forwarding some results by Amos, who run multiple netperf streams in
>>>> parallel, from an external box to the guest. TCP_STREAM results were
>>>> noisy. This could be due to buffering done by TCP, where packet size
>>>> varies even as message size is constant.
>>>>
>>>> TCP_RR results were consistent. In this benchmark, after switching
>>>> to mandatory barriers, CPU utilization increased by up to 35% while
>>>> throughput went down by up to 14%. the normalized throughput/cpu
>>>> regressed consistently, between 7 and 35%
>>>>
>>>> The "fix" applied was simply this:
>>>
>>> What machine& processor was this ?
>>
>> pined guest memory to numa node 1
>
> Please try this patch. How much does the branch cost us?

Ok, I will provide the result later.

Thanks,
Amos

> (Compiles, untested).
>
> Thanks,
> Rusty.
>
> From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
> Subject: virtio: harsher barriers for virtio-mmio.
>
> We were cheating with our barriers; using the smp ones rather than the
> real device ones. That was fine, until virtio-mmio came along, which
> could be talking to a real device (a non-SMP CPU).
>
> Unfortunately, just putting back the real barriers (reverting
> d57ed95d) causes a performance regression on virtio-pci. In
> particular, Amos reports netbench's TCP_RR over virtio_net CPU
> utilization increased up to 35% while throughput went down by up to
> 14%.
>
> By comparison, this branch costs us???
>
> Reference: https://lkml.org/lkml/2011/12/11/22
>
> Signed-off-by: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
> ---
> drivers/lguest/lguest_device.c | 10 ++++++----
> drivers/s390/kvm/kvm_virtio.c | 2 +-
> drivers/virtio/virtio_mmio.c | 7 ++++---
> drivers/virtio/virtio_pci.c | 4 ++--
> drivers/virtio/virtio_ring.c | 34 +++++++++++++++++++++-------------
> include/linux/virtio_ring.h | 1 +
> tools/virtio/linux/virtio.h | 1 +
> tools/virtio/virtio_test.c | 3 ++-
> 8 files changed, 38 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
> --- a/drivers/lguest/lguest_device.c
> +++ b/drivers/lguest/lguest_device.c
> @@ -291,11 +291,13 @@ static struct virtqueue *lg_find_vq(stru
> }
>
> /*
> - * OK, tell virtio_ring.c to set up a virtqueue now we know its size
> - * and we've got a pointer to its pages.
> + * OK, tell virtio_ring.c to set up a virtqueue now we know its size
> + * and we've got a pointer to its pages. Note that we set weak_barriers
> + * to 'true': the host just a(nother) SMP CPU, so we only need inter-cpu
> + * barriers.
> */
> - vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
> - vdev, lvq->pages, lg_notify, callback, name);
> + vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN, vdev,
> + true, lvq->pages, lg_notify, callback, name);
> if (!vq) {
> err = -ENOMEM;
> goto unmap;
> diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
> --- a/drivers/s390/kvm/kvm_virtio.c
> +++ b/drivers/s390/kvm/kvm_virtio.c
> @@ -198,7 +198,7 @@ static struct virtqueue *kvm_find_vq(str
> goto out;
>
> vq = vring_new_virtqueue(config->num, KVM_S390_VIRTIO_RING_ALIGN,
> - vdev, (void *) config->address,
> + vdev, true, (void *) config->address,
> kvm_notify, callback, name);
> if (!vq) {
> err = -ENOMEM;
> diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
> --- a/drivers/virtio/virtio_mmio.c
> +++ b/drivers/virtio/virtio_mmio.c
> @@ -309,9 +309,10 @@ static struct virtqueue *vm_setup_vq(str
> writel(virt_to_phys(info->queue) >> PAGE_SHIFT,
> vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
>
> - /* Create the vring */
> - vq = vring_new_virtqueue(info->num, VIRTIO_MMIO_VRING_ALIGN,
> - vdev, info->queue, vm_notify, callback, name);
> + /* Create the vring: no weak barriers, the other side is could
> + * be an independent "device". */
> + vq = vring_new_virtqueue(info->num, VIRTIO_MMIO_VRING_ALIGN, vdev,
> + false, info->queue, vm_notify, callback, name);
> if (!vq) {
> err = -ENOMEM;
> goto error_new_virtqueue;
> diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
> --- a/drivers/virtio/virtio_pci.c
> +++ b/drivers/virtio/virtio_pci.c
> @@ -414,8 +414,8 @@ static struct virtqueue *setup_vq(struct
> vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
>
> /* create the vring */
> - vq = vring_new_virtqueue(info->num, VIRTIO_PCI_VRING_ALIGN,
> - vdev, info->queue, vp_notify, callback, name);
> + vq = vring_new_virtqueue(info->num, VIRTIO_PCI_VRING_ALIGN, vdev,
> + true, info->queue, vp_notify, callback, name);
> if (!vq) {
> err = -ENOMEM;
> goto out_activate_queue;
> diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
> --- a/drivers/virtio/virtio_ring.c
> +++ b/drivers/virtio/virtio_ring.c
> @@ -28,17 +28,20 @@
> #ifdef CONFIG_SMP
> /* Where possible, use SMP barriers which are more lightweight than mandatory
> * barriers, because mandatory barriers control MMIO effects on accesses
> - * through relaxed memory I/O windows (which virtio does not use). */
> -#define virtio_mb() smp_mb()
> -#define virtio_rmb() smp_rmb()
> -#define virtio_wmb() smp_wmb()
> + * through relaxed memory I/O windows (which virtio-pci does not use). */
> +#define virtio_mb(vq) \
> + do { if ((vq)->weak_barriers) smp_mb(); else mb(); } while(0)
> +#define virtio_rmb(vq) \
> + do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
> +#define virtio_wmb(vq) \
> + do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
> #else
> /* We must force memory ordering even if guest is UP since host could be
> * running on another CPU, but SMP barriers are defined to barrier() in that
> * configuration. So fall back to mandatory barriers instead. */
> -#define virtio_mb() mb()
> -#define virtio_rmb() rmb()
> -#define virtio_wmb() wmb()
> +#define virtio_mb(vq) mb()
> +#define virtio_rmb(vq) rmb()
> +#define virtio_wmb(vq) wmb()
> #endif
>
> #ifdef DEBUG
> @@ -77,6 +80,9 @@ struct vring_virtqueue
> /* Actual memory layout for this queue */
> struct vring vring;
>
> + /* Can we use weak barriers? */
> + bool weak_barriers;
> +
> /* Other side has made a mess, don't try any more. */
> bool broken;
>
> @@ -245,14 +251,14 @@ void virtqueue_kick(struct virtqueue *_v
> START_USE(vq);
> /* Descriptors and available array need to be set before we expose the
> * new available array entries. */
> - virtio_wmb();
> + virtio_wmb(vq);
>
> old = vq->vring.avail->idx;
> new = vq->vring.avail->idx = old + vq->num_added;
> vq->num_added = 0;
>
> /* Need to update avail index before checking if we should notify */
> - virtio_mb();
> + virtio_mb(vq);
>
> if (vq->event ?
> vring_need_event(vring_avail_event(&vq->vring), new, old) :
> @@ -314,7 +320,7 @@ void *virtqueue_get_buf(struct virtqueue
> }
>
> /* Only get used array entries after they have been exposed by host. */
> - virtio_rmb();
> + virtio_rmb(vq);
>
> i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id;
> *len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len;
> @@ -337,7 +343,7 @@ void *virtqueue_get_buf(struct virtqueue
> * the read in the next get_buf call. */
> if (!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
> vring_used_event(&vq->vring) = vq->last_used_idx;
> - virtio_mb();
> + virtio_mb(vq);
> }
>
> END_USE(vq);
> @@ -366,7 +372,7 @@ bool virtqueue_enable_cb(struct virtqueu
> * entry. Always do both to keep code simple. */
> vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
> vring_used_event(&vq->vring) = vq->last_used_idx;
> - virtio_mb();
> + virtio_mb(vq);
> if (unlikely(more_used(vq))) {
> END_USE(vq);
> return false;
> @@ -393,7 +399,7 @@ bool virtqueue_enable_cb_delayed(struct
> /* TODO: tune this threshold */
> bufs = (u16)(vq->vring.avail->idx - vq->last_used_idx) * 3 / 4;
> vring_used_event(&vq->vring) = vq->last_used_idx + bufs;
> - virtio_mb();
> + virtio_mb(vq);
> if (unlikely((u16)(vq->vring.used->idx - vq->last_used_idx) > bufs)) {
> END_USE(vq);
> return false;
> @@ -453,6 +459,7 @@ EXPORT_SYMBOL_GPL(vring_interrupt);
> struct virtqueue *vring_new_virtqueue(unsigned int num,
> unsigned int vring_align,
> struct virtio_device *vdev,
> + bool weak_barriers,
> void *pages,
> void (*notify)(struct virtqueue *),
> void (*callback)(struct virtqueue *),
> @@ -476,6 +483,7 @@ struct virtqueue *vring_new_virtqueue(un
> vq->vq.vdev = vdev;
> vq->vq.name = name;
> vq->notify = notify;
> + vq->weak_barriers = weak_barriers;
> vq->broken = false;
> vq->last_used_idx = 0;
> vq->num_added = 0;
> diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
> --- a/include/linux/virtio_ring.h
> +++ b/include/linux/virtio_ring.h
> @@ -168,6 +168,7 @@ struct virtqueue;
> struct virtqueue *vring_new_virtqueue(unsigned int num,
> unsigned int vring_align,
> struct virtio_device *vdev,
> + bool weak_barriers,
> void *pages,
> void (*notify)(struct virtqueue *vq),
> void (*callback)(struct virtqueue *vq),
> diff --git a/tools/virtio/linux/virtio.h b/tools/virtio/linux/virtio.h
> --- a/tools/virtio/linux/virtio.h
> +++ b/tools/virtio/linux/virtio.h
> @@ -214,6 +214,7 @@ void *virtqueue_detach_unused_buf(struct
> struct virtqueue *vring_new_virtqueue(unsigned int num,
> unsigned int vring_align,
> struct virtio_device *vdev,
> + bool weak_barriers,
> void *pages,
> void (*notify)(struct virtqueue *vq),
> void (*callback)(struct virtqueue *vq),
> diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c
> --- a/tools/virtio/virtio_test.c
> +++ b/tools/virtio/virtio_test.c
> @@ -92,7 +92,8 @@ static void vq_info_add(struct vdev_info
> assert(r >= 0);
> memset(info->ring, 0, vring_size(num, 4096));
> vring_init(&info->vring, num, info->ring, 4096);
> - info->vq = vring_new_virtqueue(info->vring.num, 4096, &dev->vdev, info->ring,
> + info->vq = vring_new_virtqueue(info->vring.num, 4096, &dev->vdev,
> + true, info->ring,
> vq_notify, vq_callback, "test");
> assert(info->vq);
> info->vq->priv = info;
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/