[PATCHv3 09/10] xshm: Makefile and Kconfig for M7400 Shared Memory Drivers

[Sjur BrÃndeland]

CONFIG_XSHM should be selected from architectures supporting
C2C, this will enable the XSHM configuration.

Signed-off-by: Sjur BrÃndeland <sjur.brandeland@xxxxxxxxxxxxxx>
---
cc: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
cc: Paul Bolle <pebolle@xxxxxxxxxx>

 drivers/Kconfig       |    2 +
 drivers/Makefile      |    1 +
 drivers/xshm/Kconfig  |   61 +++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/xshm/Makefile |    5 ++++
 4 files changed, 69 insertions(+), 0 deletions(-)
 create mode 100644 drivers/xshm/Kconfig
 create mode 100644 drivers/xshm/Makefile

diff --git a/drivers/Kconfig b/drivers/Kconfig
index b5e6f24..c91a13c 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -136,4 +136,6 @@ source "drivers/hv/Kconfig"
 
 source "drivers/devfreq/Kconfig"
 
+source "drivers/xshm/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 1b31421..eedd8e5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -120,6 +120,7 @@ obj-$(CONFIG_VLYNQ)		+= vlynq/
 obj-$(CONFIG_STAGING)		+= staging/
 obj-y				+= platform/
 obj-y				+= ieee802154/
+obj-$(CONFIG_XSHM)		+= xshm/
 #common clk code
 obj-y				+= clk/
 
diff --git a/drivers/xshm/Kconfig b/drivers/xshm/Kconfig
new file mode 100644
index 0000000..0993346
--- /dev/null
+++ b/drivers/xshm/Kconfig
@@ -0,0 +1,61 @@
+#
+# XSHM Framework
+#
+
+config XSHM
+	tristate
+	default n
+	depends on EXPERIMENTAL
+
+if XSHM && NET
+
+menu "XSHM drivers and interfaces"
+
+config DUMMY_C2C
+	tristate "Dummy C2C GENIO driver"
+	depends on !C2C
+	default XSHM
+	---help---
+	Say "Y" or "M" if you want to compile a dummy C2C driver.
+	Use this if you want to compile without the real
+	C2C driver available.
+
+config XSHM_BUS
+	tristate
+	default XSHM_DEV
+
+config XSHM_BOOT
+	tristate
+	depends on XSHM_DEV
+	default XSHM_DEV
+
+config XSHM_DEV
+	tristate "XSHM Channels for External Shared Memory (XSHM)"
+	depends on DUMMY_C2C || C2C
+	select XSHM_BUS
+	select XSHM_BOOT
+	default XSHM
+	---help---
+	Say "Y" to use External Shared Memory (XSHM) IPC mechanism.
+	XSHM is an IPC protocol used to talk to external device such
+	as modem over a shared memory (e.g. Chip to Chip).
+	Only say "M" here if you want to test XSHM and need to load
+	and unload its module.
+	If unsure say N.
+
+config XSHM_CHR
+	tristate "Character device for External Shared Memory (XSHM)"
+	depends on XSHM_DEV
+	default XSHM_DEV
+	---help---
+	Say "Y" to use a character device for the External Shared
+	Memory (XSHM) IPC mechanism. XSHM is an IPC protocol used to
+	talk to external device such as modem over a shared memory
+	(e.g. Chip to Chip).
+	Only say "M" here if you want to test XSHM and need to load
+	and unload its module.
+	If unsure say N.
+
+endmenu
+
+endif
diff --git a/drivers/xshm/Makefile b/drivers/xshm/Makefile
new file mode 100644
index 0000000..001cd79
--- /dev/null
+++ b/drivers/xshm/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_XSHM_BUS) += xshm_bus.o
+obj-$(CONFIG_XSHM_BOOT) += xshm_boot.o
+obj-$(CONFIG_XSHM_DEV) += xshm_dev.o
+obj-$(CONFIG_XSHM_CHR) +=  xshm_chr.o
+obj-$(CONFIG_DUMMY_C2C) +=  dummy_c2c_genio.o
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/