RE: [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver
From: Dong Aisheng-B29396
Date: Thu Dec 15 2011 - 02:38:51 EST
Hi Grant,
> -----Original Message-----
> From: glikely@xxxxxxxxxxxx [mailto:glikely@xxxxxxxxxxxx] On Behalf Of
> Grant Likely
> Sent: Thursday, December 15, 2011 5:47 AM
> To: Linus Walleij
> Cc: Dong Aisheng-B29396; linux-kernel@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linus.walleij@xxxxxxxxxxxxxx;
> s.hauer@xxxxxxxxxxxxxx; Guo Shawn-R65073; kernel@xxxxxxxxxxxxxx;
> rob.herring@xxxxxxxxxxx
> Subject: Re: [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver
> Importance: High
>
> On Wed, Dec 14, 2011 at 11:00 AM, Linus Walleij <linus.walleij@xxxxxxxxxx>
> wrote:
> > On Wed, Dec 14, 2011 at 5:03 PM, Dong Aisheng <b29396@xxxxxxxxxxxxx>
> wrote:
> >
> >> The driver contains the initial support for imx53 and imx6q.
> >
> > Cool! Comments below...
> >
> >> --- /dev/null
> >> +++ b/drivers/pinctrl/pinmux-imx-core.c
> >
> > We should start naming these pinctrl-* rather than pinmux-* so just
> > rename it.
> >
> > Until here it looks like business as usual..
> >
> >> +#ifdef CONFIG_OF
> >> +static int __devinit imx_pmx_parse_functions(struct device_node *np,
> >> + struct imx_pinctrl_info *info, u32 num) {
> >> + struct imx_pmx_func *function;
> >> + struct imx_pin_group *group;
> >> + int ret, len;
> >> +
> >> + dev_dbg(info->dev, "parse function %d\n", num);
> >> +
> >> + group = &info->groups[num];
> >> + function = &info->functions[num];
> >> +
> >> + /* Initialise group */
> >> + ret = of_property_read_string(np, "grp_name", &group->name);
> >> + if (ret) {
> >> + dev_err(info->dev, "failed to get grp_name\n");
> >> + return ret;
> >> + }
> >> +
> >> + ret = of_property_read_u32(np, "num_pins", &group->num_pins);
> >> + if (ret) {
> >> + dev_err(info->dev, "failed to get num_pins\n");
> >> + return ret;
> >> + }
> >> +
> >> + ret = of_property_read_u32(np, "num_mux", &group->num_mux);
> >> + if (ret) {
> >> + dev_err(info->dev, "failed to get num_mux\n");
> >> + return ret;
> >> + }
> >> +
> >> + if (group->num_pins != group->num_mux)
> >> + return -EINVAL;
> >> +
> >> + group->pins = devm_kzalloc(info->dev, group->num_pins *
> >> + sizeof(unsigned int),
> >> + GFP_KERNEL);
> >> + group->mux_mode = devm_kzalloc(info->dev, group->num_mux *
> >> + sizeof(unsigned int),
> >> + GFP_KERNEL);
> >> + if (!group->pins || !group->mux_mode)
> >> + return -ENOMEM;
> >> +
> >> + /* sanity check */
> >> + if (of_get_property(np, "grp_pins", &len) &&
> >> + len != group->num_pins * sizeof(unsigned int)) {
> >> + dev_err(info->dev, "wrong pins number?\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + if (of_get_property(np, "grp_mux", &len) &&
> >> + len != group->num_mux * sizeof(unsigned int)) {
> >> + dev_err(info->dev, "wrong pin mux number?\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + ret = of_property_read_u32_array(np, "grp_pins",
> >> + group->pins, group->num_pins);
> >> + if (ret) {
> >> + dev_err(info->dev, "failed to get grp_pins\n");
> >> + return ret;
> >> + }
> >> +
> >> + ret = of_property_read_u32_array(np, "grp_mux",
> >> + group->mux_mode, group->num_mux);
> >> + if (ret) {
> >> + dev_err(info->dev, "failed to get grp_mux\n");
> >> + return ret;
> >> + }
> >> +
> >> + /* Initialise function */
> >> + ret = of_property_read_string(np, "func_name",
> >> + &function->name);
> >> + if (ret) {
> >> + dev_err(info->dev, "failed to get func_name\n");
> >> + return ret;
> >> + }
> >> +
> >> + function->groups = devm_kzalloc(info->dev, sizeof(char **),
> >> + GFP_KERNEL);
> >> + function->num_groups = 1;
> >> + function->groups[0] = group->name;
> >> +
> >> + dev_dbg(info->dev, "func_name %s grp_name %s num_groups
> >> + %d\n",
> >> + function->name, function->groups[0],
> >> + function->num_groups);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int __devinit imx_pmx_probe_dt(struct platform_device *pdev,
> >> + struct imx_pinctrl_info *info) {
> >> + struct device_node *np = pdev->dev.of_node;
> >> + struct device_node *child = NULL;
> >> + int ret, i;
> >> + u32 nfuncs = 0;
> >> +
> >> + if (!np)
> >> + return -ENODEV;
> >> +
> >> + nfuncs = of_get_child_number(np);
> >> + if (nfuncs <= 0) {
> >> + dev_err(&pdev->dev, "no functions defined\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + info->nfunctions = nfuncs;
> >> + info->functions = devm_kzalloc(&pdev->dev, nfuncs *
> >> + sizeof(struct imx_pmx_func),
> >> + GFP_KERNEL);
> >> + if (!info->functions)
> >> + return -ENOMEM;
> >> +
> >> + /* DT file only passes one group per one function */
> >> + info->ngroups = nfuncs;
> >> + info->groups = devm_kzalloc(&pdev->dev, nfuncs *
> >> + sizeof(struct imx_pin_group),
> >> + GFP_KERNEL);
> >> + if (!info->groups)
> >> + return -ENOMEM;
> >> +
> >> + child = NULL;
> >> + i = 0;
> >> + for_each_child_of_node(np, child) {
> >> + ret = imx_pmx_parse_functions(child, info, i++);
> >> + if (ret) {
> >> + dev_err(&pdev->dev, "failed to parse
> >> + function\n");
> >> + return ret;
> >> + }
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +#else
> >> +static int __devinit imx_pmx_probe_dt(struct platform_device *pdev,
> >> + struct imx_pinctrl_info *info) {
> >> + return -ENODEV;
> >> +}
> >> +#endif
> >
> > Looks clever to me! And I think we have agreed that this probing must
> > be inside each driver.
> >
> > Can we have a look at the corresponding device tree?
>
> ... and binding documentation. While on that topic, the convention is
> for property names to use dash '-' characters, not underscores '_'.
> The properties I see here are using the later.
>
Yes, will follow the convention and add binding doc.
Thanks for your suggestion.
Regards
Dong Aisheng
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/