Re: bug report: irq 19: nobody cared (try booting with the "irqpoll"option)

From: Julian Sikorski
Date: Thu Dec 15 2011 - 09:33:09 EST

Next message: Shawn Guo: "Re: [PATCH 3/9] irq: convert generic-chip to use irq_domain"
Previous message: Julian Sikorski: "bug report: irq 19: nobody cared (try booting with the "irqpoll"option)"
In reply to: Julian Sikorski: "bug report: irq 19: nobody cared (try booting with the "irqpoll"option)"
Next in thread: Clemens Ladisch: "Re: bug report: irq 19: nobody cared (try booting with the "irqpoll"option)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

W dniu 15.12.2011 15:30, Julian Sikorski pisze:
> Hello list,
>
> this is happening every time I reboot from suspend on a Clevo P150HM
> machine. It has been occuring for a while, but this report is for Fedora
> kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16 x86_64 here).
> Smolt profile is available here:
>
> http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6
>
> I have the problem itself does not seem to manifest in anything else
> except abrt complaining. The trace:
>
> irq 19: nobody cared (try booting with the "irqpoll" option)
> Pid: 0, comm: swapper Not tainted 3.1.5-2.fc16.x86_64 #1
> Call Trace:
> <IRQ> [<ffffffff810dc87d>] __report_bad_irq+0x3d/0xe0
> [<ffffffff810dcb3d>] note_interrupt+0x16d/0x220
> [<ffffffff8101a4f3>] ? native_sched_clock+0x13/0x80
> [<ffffffff810da8f9>] handle_irq_event_percpu+0xa9/0x220
> [<ffffffff810daab4>] handle_irq_event+0x44/0x70
> [<ffffffff810dd49f>] handle_fasteoi_irq+0x5f/0xf0
> [<ffffffff810151e9>] handle_irq+0x49/0xa0
> [<ffffffff815db6da>] do_IRQ+0x5a/0xe0
> [<ffffffff815d116e>] common_interrupt+0x6e/0x6e
> <EOI> [<ffffffff8130179b>] ? intel_idle+0xcb/0x120
> [<ffffffff8130177d>] ? intel_idle+0xad/0x120
> [<ffffffff814803c6>] cpuidle_idle_call+0xc6/0x280
> [<ffffffff81012225>] cpu_idle+0xc5/0x120
> [<ffffffff815ab0ee>] rest_init+0x72/0x74
> [<ffffffff81b7ec0a>] start_kernel+0x3b5/0x3c0
> [<ffffffff81b7e347>] x86_64_start_reservations+0x132/0x136
> [<ffffffff81b7e140>] ? early_idt_handlers+0x140/0x140
> [<ffffffff81b7e44d>] x86_64_start_kernel+0x102/0x111
>
> I am attaching the relevant part of /var/log/messages, please let me
> know if other information is needed. Thank you for your help in advance.
>
> Regards,
> Julian
>
> P.S.
> Please keep me CCed, I am not subscribed.
I was told that some other files might be useful. Please find attached
the output of lspci -vvv and of /proc/interrupts

Julian
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f4000000-f60fffff
Prefetchable memory behind bridge: 00000000e8000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f650a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6508000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f6500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6400000-f64fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6300000-f63fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6200000-f62fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6100000-f61fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f6507000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at f6506000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f6505000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:00.0 VGA compatible controller: nVidia Corporation Device 0e31 (rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at f6000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb

01:00.1 Audio device: nVidia Corporation GF104 High Definition Audio Controller (rev a1)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel

02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd

03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 53
Region 0: Memory at f6320000 (32-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at d100 [size=128]
Region 3: I/O ports at d000 [size=256]
Region 4: Memory at f6310000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f6300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: jme
Kernel modules: jme

03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6326000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6325000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: sdhci-pci

03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6324000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms

04:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6230 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f6200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn

05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6103000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f6102000 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at f6101000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at f6100000 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 129 0 0 0 0 0 0 0 IR-IO-APIC-edge timer
1: 3920 0 0 0 0 0 0 0 IR-IO-APIC-edge i8042
8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0
9: 1852 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi acpi
12: 34409 0 0 0 0 0 0 0 IR-IO-APIC-edge i8042
16: 31732 1442 5482 3558 0 0 0 0 IR-IO-APIC-fasteoi ehci_hcd:usb1, nouveau
17: 152 0 40 0 0 0 0 0 IR-IO-APIC-fasteoi snd_hda_intel
18: 0 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi jmb38x_ms:slot0, mmc0
19: 100008 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi firewire_ohci
23: 141 29 0 0 0 0 0 0 IR-IO-APIC-fasteoi ehci_hcd:usb2
40: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
42: 23619 8738 14883 9851 0 0 0 0 IR-PCI-MSI-edge ahci
43: 1 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd
44: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd
45: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd
46: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd
47: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd
48: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd
49: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd
50: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd
51: 181759 0 0 0 0 0 0 0 IR-PCI-MSI-edge iwlagn
52: 352 0 0 0 0 0 0 0 IR-PCI-MSI-edge snd_hda_intel
53: 2 0 0 0 0 0 0 0 IR-PCI-MSI-edge p1p1
NMI: 36 112 51 21 167 30 18 10 Non-maskable interrupts
LOC: 745620 286150 151131 63431 569325 158704 93468 45004 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 36 112 51 21 167 30 18 10 Performance monitoring interrupts
IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts
RES: 395806 190268 69817 35327 341386 63276 31648 23782 Rescheduling interrupts
CAL: 2594 4557 6003 6884 3868 8841 10965 11701 Function call interrupts
TLB: 2847 2513 1853 4537 1537 2086 1148 1154 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 8 8 8 8 8 8 8 8 Machine check polls
ERR: 0
MIS: 0

Next message: Shawn Guo: "Re: [PATCH 3/9] irq: convert generic-chip to use irq_domain"
Previous message: Julian Sikorski: "bug report: irq 19: nobody cared (try booting with the "irqpoll"option)"
In reply to: Julian Sikorski: "bug report: irq 19: nobody cared (try booting with the "irqpoll"option)"
Next in thread: Clemens Ladisch: "Re: bug report: irq 19: nobody cared (try booting with the "irqpoll"option)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]