Re: iwl3945 didn't survive after s2ram failure

[Michal Hocko]

And of course I forgot to attach logs...

On Thu 05-01-12 15:19:13, Michal Hocko wrote:
> On Thu 05-01-12 12:07:45, Stanislaw Gruszka wrote:
> [...]
> > Only interesting thing we do while resume in the driver is:
> > pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); 
> > we do the same during erly stage of .probe function too.
> > 
> > In the RH bugzilla case, it was regression. There are no iwlegacy
> > changes between mentioned kernel versions. There are some APCI and pci
> > changes. Can you try if any of these kernel boot parameters helps:
> > pcie_aspm=off
> > pcie_aspm=force
> > pci=nocsr
> > pci=use_csr
> 
> OK, so I have tried to boot with pcie_aspm=off and the wireless
> resurrect. The I found out that I booted into 3.2 rather than 3.2-rc6 so
> I retested with the original kernel and guess what, yes it reported the
> same problem as before (with or without parameter). 
> So I have tried to retest with few kernels (3.2.0-rc5,
> 3.2.0-rc6-00005-ga36bfdd, 3.2.0-rc7-00083-g115e8e7 and 3.2.0) that I
> still had on my machine and 3.2.0-rc6-00005-ga36bfdd seems to be the
> only affected one.
> There doesn't seem to be any obvious difference wrt. the driver in the
> logs (attached).
> 
> Looking in the history it seems that 497f16f2 [pci: Fix hotplug of
> Express Module with pci bridges] might be related. It fixes an issue
> introduced by bbef98ab [PCI: defer enablement of SRIOV BARS] which is a
> part of my 3.2.0-rc6-00005-ga36bfdd problematic version. But I do not
> understand details of the patch so I cannot tell that for 100%.
> Yinghai Lu, is it possible that I the problem I have seen is somehow
> related? For reference the thread started at
> https://lkml.org/lkml/2011/12/27/65
> 
> Thanks
> -- 
> Michal Hocko
> SUSE Labs
> SUSE LINUX s.r.o.
> Lihovarska 1060/12
> 190 00 Praha 9    
> Czech Republic

-- 
Michal Hocko
SUSE Labs
SUSE LINUX s.r.o.
Lihovarska 1060/12
190 00 Praha 9    
Czech Republic

Attachment: iwlwifi-eeprom-dmesg.tar.bz2
Description: Binary data