Re: [patch v1, kernel version 3.2.1] net/ipv4/ip_gre: Ethernetmultipoint GRE over IP

[Stephen Hemminger]

On Mon, 16 Jan 2012 18:26:57 +0100
Štefan Gula <steweg@xxxxxxxxx> wrote:

> Dňa 16. januára 2012 17:36, Stephen Hemminger <shemminger@xxxxxxxxxx> napísal/a:
> > On Mon, 16 Jan 2012 13:13:19 +0100
> > Štefan Gula <steweg@xxxxxxxxx> wrote:
> >
> >> From: Stefan Gula <steweg@xxxxxxxxx
> >>
> >> This patch is an extension for current Ethernet over GRE
> >> implementation, which allows user to create virtual bridge (multipoint
> >> VPN) and forward traffic based on Ethernet MAC address informations in
> >> it. It simulates the Bridge bahaviour learing mechanism, but instead
> >> of learning port ID from which given MAC address comes, it learns IP
> >> address of peer which encapsulated given packet. Multicast, Broadcast
> >> and unknown-multicast traffic is send over network as multicast
> >> enacapsulated GRE packet, so one Ethernet multipoint GRE tunnel can be
> >> represented as one single virtual switch on logical level and be also
> >> represented as one multicast IPv4 address on network level.
> >>
> >> Signed-off-by: Stefan Gula <steweg@xxxxxxxxx>
> >
> > Thanks for the effort, but it is duplicating existing functionality.
> > It possible to do this already with existing gretap device and the
> > current bridge.
> >
> > The same thing is also supported by OpenVswitch.
> >
> 
> gretap with bridge will not do the same as gretap allows you to only
> encapsulate L2 frames inside the GRE - this one part is actually
> utilized in my code. GRE multipoint implementation is also utilized in
> my code as well. But what is missing is forwarding logic here, which
> prevents the traffic going not optimal way. Scenario one - e.g. if you
> connect through 3 sites with using 1 gretap multipoint VPN, it always
> forwards frames between site 1 and site 2 even if they are unicast.
> That represents waste of bandwidth for site 3. Now assume that there
> will be more than 40 sites and I hope you see that single current
> multipoint gretap is not also good solution here
> 
> The second scenario - e.g. using 3 sites using point-to-point gretap
> interfaces between each 2 sites (2 gretap VPN interfaces per site) and
> bridging those interfaces with real ones results in looped topology
> which needs to utilized STP inside to prevent loops. Once STP
> converges the topology will looks like this, traffic from site 1 to
> site 2 will go always directly by the way of unicast (on GRE level),
> from site 2 to site 3 always directly by the way of unicast (on GRE
> level) and from site 1 to site 3 will go indirectly through site 2 due
> STP limitations, which results in another not optimalized traffic
> flows. Now assume that the number of sites rises, so gretap+standard
> bridge code is also not a good solution here.
> 
> My code utilizes it that way that I have extended the gretap
> multipoint interface with the forwarding logic e.g. using 3 sites,
> each site uses only one gretap VPN interface and if destination MAC
> address is known to bridge code inside the gretap interface forwarding
> logic, it forwards it towards only VPN endpoint that actually need
> that by the way of unicasting on GRE level. On the other hand if the
> destination MAC address is unknown or destination MAC address is L2
> multicast or L2 broadcast than the frame is spread out through
> multicasting on GRE level, providing delivery mechanism analogous to
> standard switches on top of the multipoint GRE tunnels.

Couldn't this be controlled from user space either by programming
the FDB with netlink or doing alternative version of STP?


> I also get through briefly over OpenVswitch documentation and found
> that it is more related to virtualization inside the box like VMware
> switches or so and not to such technologies interconnecting two or
> more separate segments over routed L3 infrastructure - there is a
> mention about the CAPWAP UDP transport but this is more related to
> WiFi implementations than generic ones. My patch also doesn't need any
> special userspace api to be configured. It utilizes the existing one.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/