[PATCH] amba-pl011: clear previous interrupts before request_irq

[Shreshtha Kumar SAHU]

From: Shreshtha Kumar Sahu <shreshthakumar.sahu@xxxxxxxxxxxxxx>

All previous interrupts should be cleared before installing
interrupt handler i.e. before request_irq. pl011_shutdown
clears the interrupt register but there may be case where
bootloader transfers control to kernel and there are some
pending interrupts. In this case interrupt handler will get
called even before interrupt mask is enabled.

Change-Id: Ie58ca0a36dec76ac38babc057ce1d66b3129d8f9
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 drivers/tty/serial/amba-pl011.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 6958594..6dafaa2 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1381,6 +1381,15 @@ static int pl011_startup(struct uart_port *port)
 	uap->port.uartclk = clk_get_rate(uap->clk);
 
 	/*
+	 * Clear previous interrupts before installing interrupt handler
+	 */
+	spin_lock_irq(&uap->port.lock);
+	uap->im = 0;
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+	writew(0xffff, uap->port.membase + UART011_ICR);
+	spin_unlock_irq(&uap->port.lock);
+
+	/*
 	 * Allocate the IRQ
 	 */
 	retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
-- 
1.7.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/