Re: [PATCH V6 4/5] USB: Add EHCI bus glue for Loongson1x SoCs

[Alan Stern]

On Tue, 17 Jan 2012, Kelvin Cheung wrote:

> The Loongson1x SoCs have a built-in EHCI controller.
> This patch adds the necessary glue code to make the generic EHCI
> driver usable for them.

> --- /dev/null
> +++ b/drivers/usb/host/ehci-ls1x.c
> @@ -0,0 +1,170 @@
> +/*
> + *  Bus Glue for Loongson LS1X built-in EHCI controller.
> + *
> + *  Copyright (c) 2012 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + *  This program is free software; you can redistribute it and/or modify it
> + *  under the terms of the GNU General Public License version 2 as published
> + *  by the Free Software Foundation.
> + */
> +
> +
> +#include <linux/platform_device.h>
> +
> +static int ehci_ls1x_setup(struct usb_hcd *hcd)
> +{
> +	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
> +	int ret;
> +
> +	ehci->caps = hcd->regs;
> +	ehci->regs = hcd->regs +
> +		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
> +	dbg_hcs_params(ehci, "reset");
> +	dbg_hcc_params(ehci, "reset");
> +
> +	/* cache this readonly data; minimize chip reads */
> +	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
> +	ehci->sbrn = 0x20;
> +
> +	ehci_reset(ehci);
> +
> +	/* data structure init */
> +	ret = ehci_init(hcd);
> +	if (ret)
> +		return ret;
> +
> +	ehci_port_power(ehci, 0);
> +
> +	return 0;
> +}

Most of this routine should be replaced with a call to ehci_setup().

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/